Connect with us

Equipment

Mizuno JPX-EZ Forged and JPX-EZ irons: What you need to know

Published

on

[quote_box_center]“We’re always trying to take a game-improvement iron and make it feel more like a muscleback,” says Chris Voshall, club designer at Mizuno.[/quote_box_center]

Case in point, Mizuno’s new JPX-EZ Forged and JPX-EZ irons. While the irons use different materials and constructions than the company’s new MP-5 muscleback irons, many of the design initiatives were the same. Chiefly, how can performance be maximized without sacrificing the feel for which Mizuno irons are known?

Here’s what you need to know about the JPX-EZ Forged and JPX-EZ irons.

Mizuno JPX-EZ Forged Irons 

ab6d79df9c3a526b48e329596ececd75

  • The irons are forged from Mizuno’s 1025 Boron material, which is 30 percent stronger than the 1025E Carbon Steel the company used in the 2013 model. That allowed engineers to make structures of the irons thinner, specifically the iron faces, which improve ball speed for more distance. It also created more discretionary weight, which gave engineers the ability to move weight lower and deeper in the head design to improve forgiveness.

  • Mizuno calls the JPX-EZ Forged “Forged irons anyone can play.” Narrowing it down, they’re for discerning golfers who want more distance and forgiveness than smaller forged cavity back irons can deliver.

Screen Shot 2015-08-23 at 8.21.44 PM (1)

  • To give the JPX-EZ Forged irons more distance, Mizuno added its largest pocket cavity to the 4, 5, 6 and 7 irons, which are CNC milled behind the iron faces. They serve to lower the CG of the irons, creating a higher launch and less spin, which is the key for golfers to hit their long irons farther. The 8, 9, PW and GW have a solid-cavity design that aids with trajectory control.

  • The JPX-EZ Forged irons have the company’s redesigned “Power Frame” cavity back design, which pushes weight to the extreme four corners of the iron heads. That not only adds forgiveness, but creates a rigid frame that contributes to a more solid feel at impact.
  • The other benefit of Power Frame is that it allowed Mizuno engineers to make the forged boron iron faces even thinner toward the perimeter of the irons – especially in the long irons. This variable face thickness (thicker in the center, thinner on the edges) expands the sweet spot for more consistent distance control.
4c04d5a6a4049cf67b43c949ae985730

Mizuno’s Triple-Cut Sole.

  • The JPX-EZ Forged irons have Mizuno’s Triple-Cut sole design (above), which has a beveled leading edge that’s designed to improve turf interaction as the club enters the ground, and a relieved trailing edge that helps the club exit the turf with minimal drag.
68d9244ec05a85418ef3425f78ec64a1

At address: A JPX-EZ Forged 6 iron.

  • The JPX-EZ irons have a black nickel plated finish and come stock with True Temper’s new XP 95 shaft. They sell for $999 for an eight-piece set ($1,099 in graphite) and are available in 4-GW (RH and LH). They’re in stores Sept. 18.

JPX-EZ Forged Iron Specs

JPXforged

Mizuno JPX-EZ Irons

55711d93926f199c2fb1c9962624a5e2

  • The JPX-EZ irons are cast from 17-4 stainless steel, and use Mizuno’s “Power Frame” and “Dual Max COR Pocket Cavity” technologies to create hot-faced, high-flying irons with maximum forgiveness.
  • As in the JPX-EZ Forged irons, Mizuno’s Power Frame technology pushes weight to the corners of the golf club to improve forgiveness, feel and distance. The club faces use Mizuno’s multi-thickness COR Tech design, which achieves thin-faced, high coefficient of restitution (COR) long irons for more distance, and thicker-faced, more uniform-thickness short irons and wedges for greater trajectory control.
  • The Power Frame is also essential to support Mizuno’s Dual Max COR Pocket Cavity Technology, which includes deep “pockets” on the sole and top lines of the irons. The weight savings from the two pockets were also redistributed low and deep in the club heads to improve moment of inertia (MOI), a measure of ball speed retention on mishits.
  • Just how much weight did Mizuno remove from behind the faces of the irons? So much that the number stampings (5, 6, etc.) had to be relocated to the toe side of the irons, as the structure was too thin to support the shallow indent.
3a841e774de0bda042f3c76efd7c1dc8

The JPX-EZ irons have considerably wider soles and longer blade lengths than the JPX-EZ Forged.

  • Compared to previous game-improvement irons from Mizuno, the JPX-EZ irons have a lower-profile design that makes the clubs easier to hit higher. The shape of the irons was also tweaked in a way that gives the irons a more linear appearance at address.
123afdf45eba8f753d5e8456ed968e37

At address: The JPX-EZ irons (left) irons are larger and have thicker top lines and more offset than the JPX-EZ Forged irons.

  • The JPX-EZ irons have a black nickel plated finish, and come stock with True Temper’s XP 95 shafts. They’re available in 4-SW, and sell for $799 (steel) and $899 (graphite) for an eight-piece set for RH and LH golfers. They’re in stores Sept. 18.

JPX-EZ Iron Specs

JPXez

 

See what GolfWRX Members are saying about the new irons in our forum. 

28 Comments

28 Comments

  1. Primo

    Aug 26, 2015 at 8:15 pm

    Still playing the MX 900 myself. Also a bit chunky, but forged and I know where they are going. 8-W looks more blade like. Tried all the new Zunos and basically everything else. Like the extra distance somewhat with new versions, but am OK hitting an 8 rather than saying wedge. I do get a club or more with newer clubs. My opinion re: the 5 gap on low irons versus 4 is that the faces are so much faster, having them spaced at only 4 causes a bit more overlap than preferred. I borrowed all of the new Zunos (800, 825, 850, EZ old model forged and cast) 7 iron and down from my local shop, liked them all, hit them farther, but never pulled the trigger…maybe this time around. Also borrowed Callaway fx, new and old ping g’s, also more distance, but new stuff comes out right around the time I make a choice and have to start all over.

  2. christian

    Aug 26, 2015 at 4:06 am

    I find it weird the forged comes with shafts that are 0.5 inches shorter than the non-forged, with a 5-iron at 37.75, which is JDM-short.
    Also, pretty flat lie angles, around 1.5 degrees flatter than usual US/Euro standard, again straight short person/JDM specs. Odd

    • Mikte T

      Aug 26, 2015 at 4:16 pm

      Not sure where you are getting your info. All the JPX EZ and EZ Forged are 37.75″ for both steel and graphite. Lengthwise this was the standard for US irons and has nothing to do with the JDM. Titleist, Taylormade, Callaway, etc have been jacking up the lengths for distance and therefore the lie angles. As always, although I rarely comply, get fitted.

  3. tim

    Aug 25, 2015 at 3:06 pm

    I played the original EZ forged with kbs tours and really liked them, but they were very heavy, at least for me. I ended up selling them but they were great irons.

  4. Martin

    Aug 25, 2015 at 4:29 am

    These look better than the first ones in this series.

    The non-forged looked like shovels before, I just upgraded my 5 year of JPX800’s to 825.

    I didn’t care for the feel of the JPX-EZ forged when I tried them, these are nice looking.

  5. Golfraven

    Aug 24, 2015 at 4:09 pm

    Video helped and the forged club has a nice finish to it. However the Dude does not show the top line which maybe not as appealing to some players. Still would give it a shot on the range.

  6. eJc

    Aug 24, 2015 at 2:51 pm

    what is the difference between these and the jpx850 forged?

    • Dave

      Aug 25, 2015 at 10:42 am

      I’m wondering the same thing.

    • Crk

      Aug 25, 2015 at 3:30 pm

      these are more game improvement. The 850 forged are basically the same as the 825 pro, the EZ forged falls in between the 850( which are really SGI) and the 850 forged. More offset and more forgiveness.

      • KK

        Aug 26, 2015 at 6:57 am

        Great comment. I would only add that the EZ line also seems to emphasize distance.

  7. jakeanderson

    Aug 24, 2015 at 2:47 pm

    they do not look good.

  8. sk33tr

    Aug 24, 2015 at 1:52 pm

    I play the EZ Forged w/ Recoil 95’s. These irons flat out perform. Cannot wait to try the updated version. Say what you want about the finish. I like to hear my playing partners say “Nice shot” every time I’m knocking it on the green.

    • Keith

      Nov 15, 2015 at 11:36 am

      I have played the original version of the EZ Forged for two years. The specs appear to be identical, but I have demoed the new version and found the 4-7 irons are longer and more forgiving. The triple-cut sole improved the turf interaction around the greens for chipping and pitching over the straight cut sole. I’m also looking at the 850 Forged.

  9. Mark

    Aug 24, 2015 at 1:24 pm

    Oh dear lord no. Chunky and cheap looking. New Mizuno offerings are starting to worry me.

    • Nolanski

      Aug 24, 2015 at 1:37 pm

      These are GI irons, not blades right? They are supposed to be “chunky”.

    • Crk

      Aug 25, 2015 at 3:31 pm

      Game improvement irons, they are all chunky. Not all Mizuno’s are made for single digit players

  10. John

    Aug 24, 2015 at 1:16 pm

    I’ll be very interested to compare the EZ Forged to the Z545s.

  11. Philip

    Aug 24, 2015 at 12:43 pm

    The only thing I don’t like is the tweaking of lofts away from 4 degrees and the bizarre tendency of other manufacturers to have odd length gaps. 4 degree lofts, regardless of design, give me consistent yardages when combined with 1/2 inch increments in length (though some PW are 1/4 inch). I’ve talked to manufacturers and no one can give me any reason for the increased lofts at the high end, so one the only reason I see is the disappearance of the 3i as the 4i approaches 20 degrees. Everyone is different, but having 3, 3.25, 3.5, 4, 5 differences in lofts, as well as 1/2, 3/8, 5/8 in lengths for some OEMs, doesn’t look like it is for the golfer, but a bandage for the manufacture due to loft creep. Too bad – as I really like some of these newer designs.

    • Jay

      Aug 24, 2015 at 3:13 pm

      I had always thought it was to keep distance gaps consistent. Did not think the relationship between loft and distance was purely linear. Going from 20 to 24 degrees adds 20% of loft, but going from 24 to 28 only adds 16% of loft??

      • Philip

        Aug 24, 2015 at 7:45 pm

        The length of the club adds a lot to the yardage gaps and for decades 4 degrees of loft worked pretty good and suddenly now they need 5 degrees for the higher clubs. For myself I get consistent yardages with 4 degrees and my SGI clubs are from 2003. In the end, if the set generates evenly spaced yardages then all is well. Of course, soon they can call the 4i a 3i and say they are going with classic lofts and start the loft creep all over again. Besides, if it truly is to evenly gap the irons then why are they not increasing the gaps at the low end? I place with a lot more golfers that cannot get any extra yardage after their 6i/5i than have issues with their 9i/PW.

  12. HackerDav31

    Aug 24, 2015 at 12:23 pm

    TWO sets of irons?? They release too much product!! Just buy the new ones in 3 months! These are going to destroy the value of my current set!! I hate options as a consumer!! They’re ruining Golf!! Rabble, rabble, rabble…

    Oh, wait. Mizuno? Sorry… Wrong brand.

  13. Nolanski

    Aug 24, 2015 at 10:15 am

    Top line seems about as thick as the Callaway Apex’s. I wanted to hit a few different forged cavity back irons this fall or next spring. These will be on the short list for sure.

    • Duane

      Aug 25, 2015 at 8:26 am

      No the Apex’s top line is quite thinner than these. If I were you I would rather look at their non-EZ JPX series. The last ones were the JPX850, not sure what the new ones will be named.

      • Chris

        Sep 2, 2015 at 6:03 pm

        They won’t have a new line replacing the JPX 850 this year. It’s MP-5, MP-25, EZ and EZ Forged. JPX 850’s will be going into their second year of the two-year cycle so nothing new to replace those. What will be getting phased out with these new releases will be MP-4, MP-64, and the first line of EZ and EZ Forged.

  14. KCCO

    Aug 24, 2015 at 10:14 am

    Def like look, and previous forged model was def a success but how long will the black last? Will they look like they have been played two seasons after two rounds? I love black club heads, but the satin silver of last EZ I would think would hold up much longer. I’m sure the technology has progressed, but I just wouldn’t want an iron to look beat after a few rounds. Of course they are just tools of the game, but I do like equipment that holds up, and have yet to see a club head with a black finish hold up.

  15. JBuer

    Aug 24, 2015 at 9:27 am

    I like the look of these better than the first gen version!

    • Mike T

      Aug 26, 2015 at 4:19 pm

      Ditto! Especially since I have to live with my OG EZ Forged. Top line looks quite a bit thicker.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

BK’s Breakdowns: Cameron Young’s winning WITB, 2025 Wyndham Championship

Published

on

Cameron Young’s WITB from his win at the 2025 Wyndham Championship. Cameron is a Titleist staff player but his bag is definitely filled with some unique clubs. Here are the clubs he used to secure his first PGA Tour win!

Driver: Titleist GT2 (9 degrees, A1 SureFit setting)
Shaft: Mitsubishi Tensei 1K Pro Orange 70 TX

3-wood: Titleist GT3 (15 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX

Hybrid: Titleist GT2 (21 degrees)
Shaft: Fujikura Ventus HB Black VeloCore+ 10 X

Irons: Titleist T200 (4), Titleist T100 (5), Titleist 631.CY Prototype (6-9)
Shafts: True Temper Dynamic Gold X7 (4-9)

Wedges: Titleist Vokey Design SM10 (48-10F, 52-12F, 56-14F @57), WedgeWorks (60-K* @62)
Shafts: True Temper Dynamic Gold X7

Putter: Scotty Cameron Phantom 9.5 Tour Prototype

Grips: Golf Pride Tour Velvet Cord

Ball: Titleist Pro V1x Prototype

Continue Reading

Whats in the Bag

Peter Malnati WITB 2025 (August)

Published

on

Driver: Titleist GT3 (10 degrees, C2 SureFit setting)
Shaft: Project X Denali Blue 60 TX

3-wood: Titleist GT3 (15 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X

7-wood: Titleist GT2 (21 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 8 X

Irons: Titleist T150 (4, 5), Titleist T100 (6-9)
Shafts: True Temper AMT Tour White X100

Wedges: Titleist Vokey Design SM10 (48-10F @47, 52-12F, 56-08M @57, 60-04T @62)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Studio Style Fastback 1.5 Tour Prototype

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x Yellow

Check out more in-hand photos Malnati’s clubs here.

Continue Reading

Equipment

GolfWRX Members Choice presented by 2nd Swing: Best driver of 2025

Published

on

We’re proud to once again partner with 2nd Swing Golf to bring you GolfWRX Members Choice 2025! 2nd Swing has more than 150,000 new and pre-swung golf clubs available in six store locations and online. Check them out here

What is the best driver in 2025? At GolfWRX, we take great pride in our online community and the cumulative knowledge and experience of our members. When it comes to the best driver of 2025, we want to know what our forum faithful think.

Since our founding in 2005, the bedrock of GolfWRX.com has been the community of passionate and knowledgeable golfers in our forums, and we put endless trust in the opinions of our GolfWRX members — the most knowledgeable community of golfers on the internet. No other group of golfers in the world tests golf clubs as frequently or as extensively, nor is armed with such in-depth information about the latest technology.

Below are the results of GolfWRX member voting for the 2025 best driver, along with the vote percentage for each club.

Best driver of 2025: The top 5

5. Callaway Elyte Triple Diamond: 6.02%

Callaway’s pitch: “For golfers looking for a fast, forgiving, yet workable driver, the Elyte Triple Diamond features a tour-inspired shape and is the preferred model by most Callaway tour players.”

You can read what other golfers are saying about the driver in the GolfWRX forums, and see our launch piece here. Shop the Callaway Elyte Triple Diamond here.

4. Ping G440 Max: 6.86%

Ping’s pitch: “The most forgiving G440 model, MAX has a hotter face to generate speed and distance, and a lighter overall system weight with a longer shaft (46″) for faster clubhead speed, higher launch and longer carries. The Free Hosel and Carbonfly Wrap crown save weight to create our lowest CG ever and increase forgiveness while contributing to a more muted, pleasing sound.”

You can read what other golfers are saying about the driver in the GolfWRX forums, and see our launch piece here. Shop the Ping G440 Max here.

3. Ping G440 LST: 9.53%

Ping’s pitch: “LST is an especially good fit for faster swings, offering less spin and more control with a penetrating trajectory. A hotter face, lighter overall system weight and longer shaft (46″) deliver more speed and distance while maintaining tight dispersion.”

@phizzy30: “Not a fan of Ping drivers in general, but 440 LST takes the cake. It’s super forgiving across the face for a low spin head, looks and sounds good and the ability to make it play neutral or slightly fade biased through the hosel settings is very appealing.”

You can read what other golfers are saying about the driver in the GolfWRX forums, and see our launch piece here. Shop the Ping G440 LST here.

2. Titleist GT3: 16.55%

Titleist’s pitch: “The GT3 Driver offers Titleist’s boldest combination of power and personalization through adjustable performance. Dial in the CG Track to your frequent contact location to make your biggest drives even bigger while taking total control over flight and shaping.”

@mrmikeac: “I’ve been Anti-Titleist for years and years and years (outside of Vokey, of course). With that being said, HOLY BEGEEZUS the GT3 driver is an absolute NUCLEAR MONSTER! This thing blew my G430 10K Max out of the water in every single category. Forgiveness is the biggest thing that stands out of me, the 3 model has always been one of the less forgiving models in the past but this GT3 can take bad shot after bad shot and still end up in the fairway, I think a ton of that has to do with the adjustability, it’s actually effective. Feel and sound is perfect, that solid crack is so addicting to hear and when you hit it out the screws this thing can absolutely bomb it. Titleist, I’m sorry for doubting you. You have converted me.”

You can read what other golfers are saying about the driver in the GolfWRX forums, and see our launch piece here. Shop the Titleist GT3 here.

1. Titleist GT2: 22.91%

Titleist’s pitch: “Delivering impressive distance from any impact point, the Titleist GT2 Driver extracts maximum performance through a forgiving design. Get the stability and added confidence of a high-MOI driver without sacrificing speed.”

@DTorres: “The Titleist GT2 has proven to be the best driver of the year. Packaged in a classic profile, GT2 perfectly balances performance and forgiveness while consistently being a high performer across all categories.”

You can read what other golfers are saying about the driver in the GolfWRX forums, and see our launch piece here. Shop the Titleist GT2 here.

Other drivers receiving >2% of the vote

Driver Vote percentage (%)
Cobra DS Adapt Max K 4.85%
Ping G430 Max 10K 3.85%
Callaway Elyte Triple Diamond 3.68%
TaylorMade Qi35 3.51%
Callaway Elyte 3.18%
Cobra DS Adapt X 2.34%
Cobra DS Adapt LS 2.17%
TaylorMade Qi35 LS 2.17%

 

 

View this post on Instagram

 

A post shared by 2nd Swing Golf (@2ndswinggolf)

Continue Reading

WITB

Facebook

Trending