Equipment

A few thoughts on counterbalancing

Published

1 month ago

Mar 31, 2026

Thousands of photos have been posted to the Lead Tape Chronicles page over the last decade. Those clubs, of course, feature lead tape, which increases swing weight so the player can better feel the club head when making crisp contact. That said, there’s another end of the spectrum when it comes to weighting a club: counterbalancing. Counterbalancing has been around just as long, though it’s not as well known, but it is equally important.

Looking through the archives, a club played by Justin Rose caught my eye in a photo from August 2024. At the top end of the shaft, at the end of the grip, there are four rolls of lead tape. These are about 1/2” wide and, judging by the diameter of most graphite shafts, about an inch in length. Typically, lead tape that is 1/2” wide and an inch long is worth two swing weight points. The GT3 driver head is 195.2 grams at stock weight, and with optional weighting, that can change. From afar, this setup would likely have a swing weight of D0-D1.

When counterweighting is in the equation, the traditional feel of more weight in the club head shifts to the butt end of the club. This allows the player to have a smoother transition from backswing to downswing. The club head may feel lighter, but the weight is more in the player’s hands. Ultimately, it comes down to player preference, as all feel is subjective with the golf club. However, this isn’t commonly seen in clubs designed for a full swing. In putters, on the other hand, counterbalancing is fairly common, especially as longer putters and grips—over 35” in length—have become more popular. That’s one way to counterbalance without adding lead tape.

Through the course of history, we’ve seen counterbalancing as a part of bag setups. Jack Nicklaus played a counterbalanced driver and woods throughout his career. His club maker, Jack Wullkotte, discovered this in the early 1960s while working on Nicklaus’ MacGregor driver. He noticed the driver was traditionally swing weighted to D6, but Jack’s was at D2. Upon further inspection, Wullkotte found that the butt end of the club had a wooden dowel inserted, drilled out, and filled with hot lead to create the counterweight.

Since counterbalancing is all about personal feel and preference, it’s rarely offered as a stock option for clubs. But there are solutions for built-in counterbalancing if you don’t want to apply lead tape each time. Shaft manufacturers now offer counterbalance shaft options as part of their lineups. For example, Justin Rose went on to play a Mitsubishi Tensei 1K Pro Orange shaft, which features counterbalancing technology. Other major shaft manufacturers also offer counterbalance options.

When is it time to try counterbalanced clubs? It’s worth considering if you have trouble with your transition from backswing to downswing, or if you’re simply looking for a new feel in your hands. Most commonly, we see putters as the starting point for counterbalancing. Companies like TourLock provide weighting systems that offer various options. Traditionally, you’d find weights from 10 to 20 grams in woods, while putter weights can start at 20 grams and go all the way up to 100 grams.

We’ve also seen more 17” putter grips on tour and as stock options. That’s a counterbalance solution without custom weighting. The SuperStroke 1.0 17” grip weighs 142 grams, while the Garsen Quad Tour 17 weighs 120 grams. These are common on Tour for putters at the standard 35” length or up to 38”.

In a game of personal preference, counterbalancing provides another option to help you find the right fit for your game. For all the lead tape used to create swing weight in the club head, the opposite approach—counterweighting—is right there to consider as well.

Equipment

Spotted at the PGA Championship: Koepka’s new putter, L.A.B. Golf’s latest prototype and custom Philly gear

Published

2 days ago

May 11, 2026

Alistair Cameron

Aronimink Golf Club takes center stage for the 2026 PGA Championship, as the world’s best, along with America’s top club pros, take on the Donald Ross classic, just outside Philadelphia in Newtown Square, Pennsylvania.

Even on the first official practice day of the championship, there was plenty of gear news and storylines to dive into, with a three-time champion going through an extensive putter testing, as well as new prototype putters spotted and custom gear galore. Let’s dive into it.

Brooks Koepka’s putter testing

Three-time PGA Championship winner Brooks Koepka spent plenty of time Monday morning and into the afternoon on the practice putting green in front of the Aronimink clubhouse, working with coaches and Tour reps and putting plenty of different flasticks through their paces, after apparently recently breaking his new TaylorMade Spider Tour X last time out at the Myrtle Beach Classic.

Koepka tested out a couple of Scotty Cameron heads, similar to that of Cameron Young’s Phantom 9.5R with a full sightline. It’s not the first time a Tour pro has asked to follow in Young’s footsteps. Justin Thomas had the same request last week at the Truist Championship. Why not follow the hot hand?

Koepka’s custom Cameron featured the same style Teryllium insert that he has used previously, most notably during his PGA Championship wins in a Newport-style blade. The putter, however, that looks to have the best chance of making its way into the bag come Thursday is a TaylorMade Spider Tour V, the model of head recently launched on Tour at the RBC Heritage.

What’s unique about Koepka’s new Tour V putter is the custom length L-Neck (plumbers) hosel that he has equipped. The extended version looks ot reduce the toe-hang of the putter along with adding stability to the stroke.

The putter change comes with a plethora of additions to Keopka’s bag after his split with Srixon/Cleveland. Along with already playing a Titleist ist Pro V1x golf ball, Koepka added Vokey wedges to his Grove XXIII staff bag last week in South Carolina. The 36-year-old is using SM11s in 48.10F, 52.12F and 56.10, along with the WedgeWorks 60B, a special grind with an interesting letter choice.

Look at Koepka’s full bag here.

L.A.B. Golf’s new vision

As GolfWRX continued the long tradition of capturing players’ bags and equipment, we got a glimpse of the latest L.A.B. Golf putter in the bag of Adrian Saddier. The Frenchman, who’s making his PGA Championship debut at Aronimink, is rolling with the newly added VZN.1i putter, which features a closed-back, winged-mallet design, resulting in a square cutout in the middle of the mallet.

Saddier’s new stick is center-shafted with two thick white alignment lines. The VZN.1 is the latest L.A.B. putter to be spotted. It comes after the traditional blade-style LINK.2.1 & LINK.2.2 were released on Tour, featuring a heel-shaft.

Take a look at the full gallery here.

Custom Philly-themed gear

As with every major championship, the PGA sees a bevy of custom gear from equipment manufacturers to highlight the theme of the week. With Aronimink sitting just west of Philadelphia, the City of Brotherly Love takes full focus.

Callaway is ringing the Liberty Bell with its Philly special-edition staff bag that tour players will be rocking at Aronimink. The bag features a pin-striped design, embossed with the Liberty Bell itself and a special green-fluff strap for the Philadelphia Phillies’ mascot, the Phillie Phanatic.

TaylorMade is also theming the staff bag around the birth of a nation, with a specially crafted staff back to celebrate the city where American independence was born. The bag features Philadelphia’s fingerprints with Independence Hall lives on the ball pocket, the Liberty Bell graces the valuables pocket, and Benjamin Franklin holds court on the back. The bottom collar reads – City of Brotherly Love – and custom “LOVE” zipper pulls pay tribute to the iconic Robert Indiana’s sculpture situated in the city center.

Tileist has adopted a different design for its GTS headcovers, going with Kelly Green, for the 2025 Super Bowl-winning Philadelphia Eagles.

Check out more custom gear in the forums.

Whats in the Bag

Alex Fitzpatrick WITB 2026 (May)

Published

2 days ago

May 11, 2026

GolfWRX Staff

Driver: Ping G440 LST (9 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi4D (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Fujikura Ventus Black 9 TX

9-wood: TaylorMade Qi4D (21 degrees)
Shaft: Fujikura Ventus Black 9 TX

Irons: Titleist T100 (5-9)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X (5-9)

Wedges: Titleist Vokey Design SM11 (46-10F, 50-12F, 56-14F), WedgeWorks (60-A+)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X (46, 50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One #7S

Grips: Golf Pride MCC

Ball: Titleist Pro V1x

Equipment

Lead Tape Hall of Fame: Hideki Matsuyama

Published

2 days ago

May 11, 2026

Andrew Von Lossow

Today is a very special day for the Lead Tape Hall of Fame. Our second inductee is announced, and with great honor, we welcome Hideki Matsuyama to the Silver Jacket ceremony. Hideki’s meticulous attention to detail and precision have earned him his place in the Lead Tape Hall of Fame.

Hideki turned professional in 2013 and began his career on the Japan Tour. He was the first rookie on the Japan Tour to lead the money list, highlighted by five wins in his first season. His first appearance on the PGA Tour was the 2013 U.S. Open at Merion, where he came in 10th place in his debut. In 2014, he won his first PGA Tour event at Memorial. Hideki is currently at 11 PGA Tour wins, including a scoring record at The Sentry in January 2025 at 35 under par. In 2021, he won The Masters. An incredible career and still full of momentum, what kind of tools does Hideki use to get in the mix week in and week out?

Matsuyama has been a career Srixon and Cleveland staff player. Typically with Graphite Design shafts in his woods and True Temper Dynamic Gold S400 shafts in his irons. A unique trait is that in his wedges, he will play X100 shafts that suit his launch preferences. Rarely do you see a stiffer profile in wedges compared to irons.

Speaking of wedges, Hideki plays the Cleveland RTX4 Forged wedges. These debuted in 2018, but due to his level of detail, this is what he plays today. You can see the lead tape placed on the wedges in different places on the back flange. Usually erring towards the heel promoting certain launch characteristics and if anything a slight draw ball flight. In a 2021 GolfWRX interview, we found Hideki does not want to see the ball fall to the right. He wants the ball to fall to the left.

We see the use of lead tape on clubs like his fairway metal, where we see a small strip near the ferrule and even at the base of the grip. Looking at the details, Hideki operates; everything is done with purpose and measured for his stats. Not the type of feel player that doesn’t know how much weight is where and says, “That’s fine.”

Srixon told us, “We also travel with pre-cut lead tape in half-gram and one-gram increments, and Hideki will apply the tape to different areas of the club (muscle, flange, hosel, shaft), depending on how the club feels while testing.”

Hideki and his team have his club spec’d to the half gram for what to add or subtract from his set. This is Hall of Fame level here, nearly alone, but with Hideki’s meticulous attention to detail for each club is amazing to see.

This attention to detail carries down to the putting green as well. Hideki rotates through a series of Scotty Cameron Newport putters with subtle changes on sightlines, bumpers, and welded plumber’s necks. Sometimes on the bottom of the putter? A strip of one-inch lead tape. The tape has been on there so long that you can see the hand-stamped logo underneath. That is absolutely Hall of Fame grade!

It is incredible to see through the lens of the level of detail that Hideki operates in. We see lead tape anywhere from the shaft, above the hosel, in different positions on the back flange of wedges, and on the bottom of the putter. The precision he brings to the course has translated into a record of winning results from the beginning. We will have to stay tuned if his new Silver Jacker accompanies his Green Jacket in the trophy room!