Equipment
Danny Lee’s Mizuno MP-32 irons: The real inside scoop!
Hipsters are known for loving “old” stuff — you know the classics, the vintage, the retro. From vinyl, to thrift store sweaters, what’s old is new again. In the case of Danny Lee, he’s leading the charge as the PGA Tour’s iron hipster.
It should also be noted that “old” is a relative term, especially with golf equipment. Now when it comes to “classics,” Mizuno has produced some of the most recognizable irons of all time, including the Cut Muscle MP-32 released in 2004.
We recently spotted Danny Lee at the Genesis Open and it started a LOT of discussion about classic designs, as well as whether these are new old stock (NOS) or new forgings, using the original tooling.
I reached out to Mizuno’s Senior Club Engineer Chris Voshall to get to the bottom of this interesting iron development. (Plus the idea that Mizuno has sets of 10-plus year-old irons kicking around ready for custom builds — I have a huge smile thinking about what that storage room might look like — is a pretty fun thought).
Heres the inside scoop on Danny’s irons from Chris Voshall
“The MP-32s being played by Danny Lee are a new old stock set that came from Luke Donald’s personal stash inside the tour van. The ones Danny is playing are the very last set of custom grind 32s that were made for Luke.”
(HERES WHERE THE STORY GETS VERY INTERESTING)
“Here’s the part that makes the Danny’s set unique – During final development of the 32s, Luke was feeling that the soles for him were not getting through the turf the same as his previous MP-33s, but he loved the profile and extra forgiveness offered by the cut muscle design.
“By working with the Craftsman on the Mizuno team they created a unique sole profile for Luke that modernized that of the MP-33 for his new MP-32s. They rounded off and beveled the trailing edge of the 32s and had multiple sets made that he used during their entire run in the line.
“The tell tale of the Luke soled irons vs. the retail and standard version is how close the trailing edge of the sole is to the “Mizuno” on the back. What’s even more interesting about the development of that sole and grind is that every MP iron moving forward in the line starting with the MP-62 in 2008 utilized the exact sole profile of the one developed with Luke for the 32s and then 62s he used to become Number 1 player in the world.”
Below are comparison pics of Danny’s irons vs retail MP-32s and MP-62s
Danny Lee’s LD Grind 32s
Standard MP-32 7-iron – notice the amount of space above the “Mizuno” text
Right – MP-62 vs Standard MP-32
Danny Lees LD Grind 9-iron
Retail MP-32 9-iron
MP-62 9-iron vs retail MP-32
WOW! How cool is that insider information? True 14-year-old prototypes back in play on Tour! Now we know 100 percent the real story behind this very cool set and how it lead to historical Mizuno design changes that we still see in the MP line today!
NOTE: All Mizuno forged irons pre-2010 meet the 2010 USGA Conforming Groove rule; they were conforming before and are still conforming now. This is also part of the reason you don’t see many other classic irons on tour, except for maybe some from Ping which did do a few older models with new grooves –most notably D.A Points’ i5s irons.
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
Gary Woodland’s winning WITB: 2026 Texas Children’s Houston Open
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
Larry Hesselrode
Nov 30, 2021 at 9:23 am
Bought MP32 then blew my knee out put them in storage for 17 years. Just tried them out. What a Club! I wouldn’t sell them now they’re priceless and still looks brand new even the grips are still good.
Matt
Jul 29, 2019 at 2:10 am
MP-32’s are still in my bag after all these years – Perfect irons
Simms
Mar 20, 2019 at 3:44 pm
I think the only problems these companies have re-introducing older models is it only works for a very small amount of the club buyer’s (no Profit) plus it does detect from some of the power of being able to advertise all the improvements in the newer clubs. There are some older clubs out there that have held up to the best the R&D’s have come up with lately…one would be the Callaway steelhead fairway woods they brought back.
Jim Hayes
Mar 11, 2019 at 3:36 pm
Love my MP-32’s. Best irons I’ve ever played. Truly incredible distance control. High flight stops quickly on most greens. If they would ever bring out he MP-32’s again i’d Buy several sets. They are simply the BEST.
Bill
Mar 10, 2019 at 12:51 pm
I am STILL playing my MP32 irons (left handed set!) They soft and very workable!! BUT, I did lose 1 club length on them. they are worn and I am ready for a new set ( Francisco Molinari’s set up is just about what I want).
I was playing the HOGAN APEX FTX set! I really loved playing both sets,but, if you gave me only a choice of one of them, it would be the FTX set. They were soft, workable AND had a thin top line, a PERFECT muscle back with a true players iron look, not too much offset and the 8 to wedge were Blades!! A real combo set designed as one set. The best part — They were LONG!!
To anyone who would really like a great players iron set, If you could find a set, used but very good condition, these would be great, at a very reasonable price.
Note: these are square grooved, old PGA rules(they may not be legal on high level tourney)
and I did replace to shafts with Dynamic gold x100.
MBU
Mar 29, 2019 at 4:03 am
I lusted after Hogans before they made them left handed, and i bought the FTX’s when they came out. I didnt appreciate them at first, it was after a 6 year lay off. But now, having bought other irons, nothing feft softer or better when struck properly. I still have them, and use them occasionally.
I may just put the 8,9,pw back in my bag…
CJ
Mar 4, 2019 at 7:27 pm
Those irons are gorgeous oh my. That grind would be a hot commodity if they came to retail I think
Jeff Spain
Mar 4, 2019 at 10:06 am
I’m 67 years young have played Mizuno MP 33 for years . I bought a custom set of Titliest AP-1 thinking I needed more forgiveness “old man clubs”, they felt like Nothing, no feedback at all. I reshafted my 33’s with Nippon pro 850gh for lighter slower swing. It’s like hookling up with your high school sweetheart, Love Them Again
Jake
Feb 22, 2019 at 1:36 pm
I might be just reminiscing, but the MP-32 sure looks a lot like the Wilson Staff ‘Tour Blade’ irons I bought in th mid-1970’s and played through the 80’s. Those irons had a really sweet feel.
Mario
Feb 22, 2019 at 1:22 pm
Best looking irons ever. Easier to hit, shape the ball like a MB, beautiful to look at
jgpl001
Feb 21, 2019 at 3:38 pm
I absolutely loved mine many years ago and could still bag them now
They had enough forgiveness to be really playable and they felt brilliant
One of the best irons of the past 20 years
Anthony Parham
Feb 21, 2019 at 1:03 pm
I have a set of MP 32s and I love them, I did the same thing they did for Luke on my short irons and they play great.
Scott
Feb 21, 2019 at 10:29 am
What about the grove change since 2004? Are the old groves grandfathered (i.e. Ping clubs)?
Roger
Feb 21, 2019 at 10:01 am
Did Chris Voshall make any comment if remaking the MP32’s (or updated version) could be produced in the future?
Michael Buell
Feb 21, 2019 at 7:39 am
I recently went back to the T zoid after trying newer Mizunos and Taylormades. I first regriped my old set then found a mint, almost unhit set on eBay. My game has improved.
Rory O Donnell
Feb 21, 2019 at 2:20 am
What’s with Mizuno releasing ‘blades’ with thick top lines – bring back the MP33 iron. It has been their best iron ever.
James
Feb 21, 2019 at 1:20 am
What does the writer mean about pre 2010 clubs conforming to post 2010 rules? Is he saying that some pre 2010 club don’t conform today?
MW
Feb 20, 2019 at 11:42 pm
I have 6 sets of MP-32s. The look, the feel, the performance in my opinion has never been matched.
Sean Fennessy
Feb 20, 2019 at 10:27 pm
Are the MP-54s any good ?
John Hennessey
Feb 23, 2019 at 12:06 am
I still play with the mp-54s, recently saw 4-people for sale at A$500 in Sydney. They are not long, but oh so accurate. I play of 12, so good for mid handicappers. Grab a set if you get the chance, just be prepared to hit an 8 iron when others might smash a wedge.
Liongolfer
Feb 20, 2019 at 10:02 pm
Interesting. Never donned on me that heel relief will help that much with turf interaction. I’ve always focussed on leading edge, toe and heel relief. The tour mp32s look much nicer than the already nice retail MP32s… don’t reintroduce these…let the cult classic status grow.