Equipment
GolfWRX Spotted: Costco Kirkland Signature wedges on USGA Conforming List
After a year of speculation, we can now say without a doubt, that Costco is in the process of producing a set of Kirkland Signature wedges—gap (52 degrees), sand (56 degrees), and lob (60 degrees) to be released sometime in the near future.
We can only make this assumption based on the fact that at least three clubs have been submitted and approved under the USGA/R&A groove conformity rule with the lofts: 52, 56, and 60 degrees—although the only image featured is of a 52 degrees.
We do not have any official information at this time beyond having spotted the wedges on the conforming list, but judging by the fact that they appear to be fully finished cosmetic samples, we can guess that it could be a short time before these start showing up in Costco warehouses.
From the available image and description, it appears the wedges will be made of carbon steel—most likely cast—and will feature milled faces to maximize spin. These are all features we see from some of the top manufacturers, so now it will come down to how this potential wedge set will be priced.
Costco Kirkland Signature wedges: How did we get here?
It was just this May, when after long speculation, Costco introduced the KS1 Putter to great fanfare, and we at GolfWRX had the exclusive: The story behind the new Costco KS1 putter. The putter sold out within days at warehouses around the United States.
Now on the heels of the putter and the Kirkland Signature golf ball, which we should note, the three-piece is one of the most reviewed and highly rated products on Costco.com, it looks as if recent speculation: With the success of the Kirkland putter, what’s next for Costco and golf? could be correct in that they plan to introduce a set of 3 stock wedges to golf consumers.
As Costco states on its website
“The Kirkland Signature brand stands for quality above all else—quality that meets or exceeds leading national brands.”
We have no idea about what shafts or grips my be part of this package set of wedges but either way, I’m sure that whatever they are priced at, they will be sure to once again shake up the golf equipment industry.
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
S
Aug 17, 2020 at 11:29 pm
Why… I mean why….? Btw, I am a Costco member myself.
T$
Jul 30, 2020 at 3:24 pm
It’s just a bummer they only come in packs of 10.
Costco rules
Jul 29, 2020 at 1:28 pm
I love these comments from some that because it made by costco it has inferior design, inferior materials, inferior production and must me something wrong……they obviously are not members of Costco, nor have had any experience with the Kirkland quality.
Lowell
Jul 29, 2020 at 12:12 pm
Best return policy. Im gonna give them a go rather than just saying I dont like them because they are from costco.
Bob
Jul 29, 2020 at 9:41 am
I would love for them to make a 50, 54 & 58 degree set! Look at the LPGA and even some PGA players that play the lower lofts! Plus, it fits in better with today’s sets that have a 45 degree pitching wedge! Going from a 44 or 45 degree PW to a 52 gap is quite a bit.
gwelfgulfer
Jul 29, 2020 at 11:35 am
This. Makes no sense to only make these lofts given the direction OEM’s are pushing clubs. Doesn’t hurt that this has been my loft set up for over 10 years now. But good on them for doing this. Just shows what we already know, that the OEM’s are gouging hard on the 2 markets they are entering, to the point that they feel there is a need they can fill.
Catherine
Jul 30, 2020 at 3:16 am
I completely agree with you!
Costco customer
Jul 29, 2020 at 9:26 am
The 3 piece golf ball sucked. The 4 piece was excellent.
Jack Nash
Jul 29, 2020 at 5:30 pm
I found the 3 piece spun just as good as the Pro V if not better. There was a Brit Pro on YouTube who did a test and with wedges and the Costco ball was min. 400 rpms better from a buck and a quarter in.
Bruce
Jul 29, 2020 at 6:09 am
Being from Canada we will not likely see the wedges or putter in Cdn Costco warehouses. Too bad; golf clubs have gotten way too expensive, we need Costco’s quality products @ fair prices.
Jack Nash
Jul 29, 2020 at 5:34 pm
You can buy them, and ship them to a U.S. boarder City warehouse then cross and bring them home with you. There’s a few in Port Huron Mich. that people from Southern Ont. use all the time.
jgpl001
Jul 29, 2020 at 4:06 am
I am afraid I just do not see the attraction, not even curiosity
Just now you can find the SM7 and RTX4 at a big discount, for me it would be an easy choice
Paulo
Jul 29, 2020 at 12:26 am
I’m going to legally change my name to “Kirkland” and save a fortune on stamping
Delbert
Jul 28, 2020 at 10:20 pm
Everyone’s a Wiener at Costco!
Carl
Jul 28, 2020 at 7:14 pm
As my old friend used to say, those things are ugly enough to scare the dark out of the closet
Garrett
Jul 28, 2020 at 4:54 pm
I wonder if these will come in a lovely pizza-oil grease finish…
George Stevenson
Jul 28, 2020 at 1:36 pm
Yes to hot dogs!
Santosh
Jul 28, 2020 at 11:56 am
Obviously, someone is making them for Costco/Kirkland. Who could it be? Cleveland?
Cody Reeder
Jul 28, 2020 at 10:58 am
Producing is a bit of an insult to actual companies with R&D. These are no more than blanks purchased basically off Alibaba with kirkland printed on them then sold for a profit.
Good system, good profit. but they didn’t “produce” them.
Blah
Jul 28, 2020 at 11:19 am
And taylormade mg2 Are artisan golf ripoffs. Who copied macgregor. Nothing is new. Everyone recycles old ideas with new marketing. The new sim is a rip off of old taylormade v sole tech which Adams used. Keep drinking the kool aid
jim
Jul 28, 2020 at 11:47 am
Wow, do you believe the stuff you are saying?
The SIM is a ripoff of the old V-sole? I never knew the V-sole had a titanium face, an 80g sole plate, and a carbon crown.
The MG2 is a ripoff of the Artisan golf wedges? Hmmmm. Didn’t the MG proceed the MG2? Artisan is doing milled soles on their wedges?
While the sand wedge hasn’t changed much since Gene Sarazen added bounce to the sand wedge in 1932, TM certainly didn’t copy Artisan. Especially since TM has been making wedges a lot longer.
eddie
Jul 28, 2020 at 4:53 pm
Design & materials are two different things.
JTB
Aug 3, 2020 at 7:34 pm
Taylormade and Adams were the same company at the time under the adidas umbrella to be fair
Anthony Chapman
Jul 28, 2020 at 11:43 am
What R&D is there really now with wedges? Wedges, like putters have become so overpriced with no performance gains. If the sole grind matches, wedges from several years ago are just as good.
JP
Jul 29, 2020 at 11:22 am
And how do your “actual companies” make their wedges? Does Artisan, Vokey, Cleveland, or TaylorMade have their own foundry in the US where they pour their blanks before finishing? Or do they do exactly as you suggest, buy blanks from China and have them finished in China with their stamping?
stanley
Jul 28, 2020 at 10:40 am
i can’t lie folks. i am going to give them a try.
DJ
Jul 28, 2020 at 1:26 pm
me too! and i’ll get a hot dog while i’m there