Equipment
TaylorMade Qi10 driver review. All 3 models! – Club Junkie Reviews
TaylorMade’s new Qi10 drivers are packed with new technology for maximum performance. Whether you are looking for maximum forgiveness or low-spin workability, there is a Qi10 driver for your needs. The faces are still 60 layers of carbon fiber, but in contrast to the Stealth line, feature a much more subtle blue tone. TaylorMade’s new Infinity Carbon Crown not only gives a weight advantage but also gives each driver a much cleaner and better look, to my eye. Each driver is a little different but built for maximum performance.
For the full, more in-depth review, check out the Club Junkie Podcast on every podcast platform and on YouTube.
TaylorMade Qi10 Max
This is the driver that is getting the most buzz it seems from the 2024 TaylorMade lineup thanks to its 10K MOI measurement. This 10K MOI means that the Qi10 Max head is extremely stable on mishits and will prevent the head from swinging open or closed.
The Max definitely has the largest-looking profile from address and has a more rounded shape to it compared to the other Qi10 drivers. I like the more rounded shape, and even though it doesn’t have the classic TaylorMade shape, it is easy on the eyes. The new blue carbon face is also more subtle and you don’t notice it compared to the previous red faces on the Stealth and Stealth 2 drivers.
Out on the course, or range, is where you will notice where the 10K comes into play. The first bad swing will be met with a shot that is more than likely more playable than you would have thought. The head keeps the ball on a straighter trajectory with reduced curve once in flight. You will still miss the fairway right or left with those swings but the shot will typically be straight to either side.
While my numbers from my most recent range session don’t show it, the launch on the Qi10 Max was more mid-high for me on the course. Ball speed was consistent and the Max held onto a good amount of it, even when you didn’t catch the center of the face. I went through my shots and was pretty impressed with the limited variation in ball speed throughout my session.
The spin numbers were also lower than expected and to be fair I was hitting a 9-degree Qi10 Max head, and I typically hit a low draw shot shape. I am not considered a high-speed or spin player, but the Qi10 Max didn’t spin a ton, even when hit low on the face. Only a handful of shots touched the low 3,000 RPM mark while most stayed lower than that. I think moving to the 10.5-degree head would be a better fit for me, adding some launch and a little spin to my shots would increase the distance by a few yards.




TaylorMade Qi10 LS
The model that we first drooled over in Rory and Tiger’s bags early this year! TaylorMade’s 2024 low-spin driver sports a new name, dropping the “Plus” designation. The LS model clearly has the traditional TaylorMade pear shape to it and a noticeably more compact look. A deeper face and shorter length from heel-to-toe give the look of a driver that the more skilled player will be able to easily shape shots with. The head also looks a bit more open than the Max head, and I love that TaylorMade has been able to create toplines that look more open than they appear.
The Qi10 LS creates some very long drives out on the course and range. This driver offers a little more feel and slightly quieter sound than the other two models, you can really feel the ball compress on the face at impact. For players who routinely hit the center, you will be rewarded with consistent fast ball speed and great distance. I hit my two longest drives with this head when I was going through my range session the other day.
Ball flight was flat, but the head is still easy to elevate and hit towering, boring tee shots. I thought the LS was actually going to come out really low, but I had no problem hitting higher shots with almost no spin. If spin is your problem with driver, the LS could be the pill you need as it is a very low spin head. I was rarely getting into the mid-2000s and had most shots in the high 1900 RPM. I never saw a ball go over 2,600 RPM, no matter where I hit it on the face.
Now the LS will show you a little less love when you aren’t swinging well and hitting it close to the center. For me, the start line of my shots was the farthest right of the three heads, but I saw more movement in the air on poor swings. There was also a little more drop-off in ball speed when the ball traveled away from center compared to the Qi10 and Qi10 Max heads.




TaylorMade Qi10
This is TaylorMade’s “bread and butter” head should fit a wide range of golfers. We have seen Rory move into this head, and we should see it in a lot of amateur bags as well this year. The Qi10 head bridges the gap between ultra forgiveness and low-spin distance with a little larger profile than the LS.
The shape is closer to the LS with a slightly more tapered line from the back of the hosel to the round back of the driver. I can’t stress enough how much I like the sleek look of the new Infinity Carbon Crown as it just gives a great view to the golfer.
This driver is the underrated one of the bunch in my opinion. While it isn’t the most forgiving or the lowest spin, it does everything rather well. It is pretty darn forgiving and definitely isn’t in a high spin category so plenty of golfers will find this head working for them.
I found the standard Qi10 the most consistent for me as it was easy to launch, and I think if you took away a few of the shots I hit higher on the face on the LS, this would have been the highest launching head of the group. The launch was mid-high and with that, the spin still never got wildly high. The misses were very straight and like the Max had less curve to them, more straight right or left.
To me, the ball speed numbers seemed to stay more consistent on mishits compared to Stealth 2 and center strikes had a softer feel to them. High-toe misses stayed in play with a more gentle draw and more carry than I expected, most of those shots ended in a pretty tight area. Swinging the Qi10 also felt a little different than the Max as I think the CG placement gives each driver its own unique feel through your swing. The Qi10 felt like it was a touch easier to release and rotated back to square at impact just a little faster than the Max. I don’t know if you could tell if you didn’t hit them side-by-side but if you do you can probably feel the difference.




TaylorMade definitely brought some changes to the Qi10 line, and I think, overall, they’ve crafted some really good drivers. The Qi10 Max will be great for those players who need the most stability they can to find the fairways, and I think will play to lower handicaps than expected. The Qi10 LS will be a skilled player’s wand to create shots and work the ball to positions on the fairway that allow them to score better. The Qi10 will fit a wide range of golfers who are looking for a driver that helps them on bad shots but still has the ball speed and spin to hit their longest drives.
Equipment
Putters that never made it: Check out some of the best tour builds that didn’t make the cut
Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.
So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)
Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.

Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.

Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.

Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.

Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.

Whats in the Bag
Patrick Reed WITB 2026 (May)
Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX

3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X

7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X

Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype

Ball: Titleist Pro V1x
Grips: Golf Pride MCC
Equipment
Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:
“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.
Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”
And our members have been naming their favorites and why in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
- ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”
Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment2 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
-
News2 weeks agoWITB Time Machine: Phil Mickelson’s winning WITB, 2021 PGA Championship
-
Equipment2 weeks agoWhich of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
-
Equipment2 weeks agoLead Tape Report: Adjusting the swingweight of the Wanamaker Trophy
