Equipment
TaylorMade SLDR Fairway Woods and Hybrids
Like TaylorMade’s SLDR driver, the company’s new SLDR fairway woods and hybrids promise golfers more distance from a lower, more forward center of gravity.
The SLDR fairway woods and hybrids have a new version TaylorMade’s “Speed Pocket,” which is no longer indented into the front of the sole like previous models. While it’s smaller than the Speed Pocket featured on the company’s RBZ Stage 2 fairway woods and hybrids, it now slices completely through the sole, creating a gap that is filled with the same polymer the company used in the design of its RocketBladez and SpeedBlade irons.
Mike Ferris, vice president of product marketing for TaylorMade, said that the new Speed Pocket makes the SLDR fairway woods even lower spinning and higher launching than previous models. The 1 mm more forward CG creates an estimated 200-to-300 rpm reduction in spin and a 1-degree increase in launch angle, giving golfers two options to improve their fairway wood and hybrid play. They can use the additional ball speed created from the clubs’ lower, more forward center of gravity to hit their fairway woods and hybrids farther, or they can choose to play higher-lofted models, which will allow them to raise their trajectory.
The draw back of moving weight lower and more forward in a club head is that it lowers a club’s moment of inertia (MOI), or its resistance to twisting on off-center hits, which decreases a club’s forgiveness. But Ferris stressed that the revamped Speed Pocket more than makes up for the loss of forgiveness, because it adds additional spring-like effect that improves the ball speed of shots struck off-center.
SLDR 3 Wood at address
SLDR 3 Hybrid at address
Note: The small alignment line positioned behind TaylorMade’s “T” logo will not be added to the retail versions of fairway woods and hybrids.
In 2013, 15 percent of the fairway woods TaylorMade sold were its “high launch” models, which have the shape of a 3 wood or 5 wood, but are designed with more loft to help boost launch angle. In 2014, Ferris said he expects that number to grow to 25 percent of TaylorMade’s fairway woods sales, as more golfers realize the benefit of hitting higher-launching, lower-spinning shots.
“The loft of fairway woods has been evolving,” Ferris said. “We think it’s good to be able to play a 4 wood instead of a 3 wood.”
Many tour players, including 2013 U.S. Open champion Justin Rose, have embraced higher-lofted fairway woods, which they are able to hit the same distance as their older, lower-lofted fairway woods but with a higher trajectory. And for golfers such as Rose, having more loft on a fairway wood has a visual benefit as well.
“It gives me more confidence to look down at a fairway wood and see more loft, especially if I know that it’s going to fly just as far,” Rose said.
The SLDR fairway woods and hybrids have a 3-degree range of adjustability (+/- 1.5 degrees), which is adjustable in 0.5-degree increments. They are made to be “visually square” at address, which means that in the neutral setting they will have a face angle that measures 2 degrees open.
The fairway woods are smaller in size than their predecessor, TaylorMade’s RBZ Stage 2 Tour, with the SLDR 3 wood measuring 20 cubic centimeters smaller (155cc versus 175cc), while the hybrids are about the same size as last year’s models. The combination of the shallower fairway wood heads and slightly shorter shaft lengths (both the fairway woods and hybrids are 0.25 inches shorter than TaylorMade’s RBZ Stage 2 Tour models) should make the clubs more playable for the majority of golfers.
The SLDR fairway woods and hybrids will be available starting Nov. 15. The fairway woods will sell for $249 ($349 with TaylorMade’s TP shafts), and the hybrids will cost $219 ($289 with a TP shaft).
Additional specs from TaylorMade
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
AJ Jensen
Dec 2, 2013 at 12:29 pm
I have a silly question. If the new SLDR woods are cut through to the inside of the head, does that mean tiny rocks can get inside the head and rattle around? That would drive me effin’ crazy.
Kinesin
Oct 28, 2013 at 12:26 pm
If these perform as good as the driver I may have to get one of these too. Recently got the SLDR driver in 10.5 with the Speeder 57g stiff shaft. WOW! Long and straight. Even drives I didn’t think I’d hit very well get out there. I hit one low off the face on our par 5 18th and was amazed to see it had gone past 300 yards. I’d say I’ve gained at least 15 yards on my Nike VRS driver
Rich
Oct 27, 2013 at 10:50 am
TP will be back next year for TMade. New TP ball and TP forged blades out soon. RBZ stage 2 replacement also on the way. The SLDR woods look good but hang around for the new product……
jon
Oct 26, 2013 at 9:57 pm
Another failure…face is about all that’s going for it….insider info from a tm rep/pro…..waste
Chris
Oct 23, 2013 at 5:05 pm
Already reduced price at Dick’s
Socorr65
Oct 23, 2013 at 12:10 pm
Oh Boy!!!! More distance promised by TaylorMade.
Since I’ve upgraded to their latest, longest club faithfully for the last four years, I consistently drive 400 yards within 5 yards of the center of the fairway and hit my fairways 350 and hybids 300. I routinely shoot in the low 50’s since I never have more than a wedge to any par 4 or 5.
I CANNOT WAIT to add 15% more distance. Even if I get worse dispersion. I’ll be putting for more eagles and probably start shooting in the high 40’s.
When is the FTC going to put a stop to manufacturers’ BS claims?
Brian stamps
Oct 25, 2013 at 8:32 am
Yeah man I so want the SLDR 3 wood!
JL
Oct 22, 2013 at 9:26 pm
How are you supposed to get the dirt out from the inside, if the pocket is cut-through?
Kinesin
Oct 28, 2013 at 12:22 pm
Its filled with a polymer so no dirt can get in
Martin
Oct 21, 2013 at 7:23 pm
The shallow face looks a lot like an Titleist F2 wood. If its just as good and longer, I will buy it!! 🙂
Prairiegolf
Oct 21, 2013 at 6:13 pm
Looks nice. Shorter shafts and charcoal grey color should make the purists happy. As long as it performs great that is all that matters to me. I look forward to trying it out.
Lazza
Oct 21, 2013 at 3:22 pm
Major problem I have with the SLDR line of clubs (got the driver) is the rather soft nameplate. Got a ding on it within one round. At the local pro shop the nameplate was already coming off on the demo driver, so I can only imagine that it will come off in a hurry on the woods and hybrids.
ac12
Oct 23, 2013 at 12:00 am
Our Club has a demo driver… The screw that holds the sliding piece in place had the threads stripped the first day. Cheaply done
Mike French
Oct 21, 2013 at 1:17 pm
If you want SWAG get a Kick-X SRT hybrid.
DRAGO
Oct 21, 2013 at 1:16 pm
I hear they have higher bounce options coming out for DIGR and DRVR swings out there…..Rumor is for an extra $250 in an underground garage Vokey will come and custom grind a fairway wood or hybrid for your needs! HAHAHA
SWAG BAG
Oct 21, 2013 at 12:49 pm
The most important thing for me is lookin’ fresh on the course. I want a bag full o’ swag. And, these T-Made SLDR’s aren’t fresh, and won’t help me look good. These are about the whackest clubs Ive seen TM make in a long minute.
Remember, TM, we want SWAG, not the WACKNESS.
CD
Oct 21, 2013 at 12:11 pm
Don’t bet on it. They’ll definitely have them marked down in time for Christmas shopping.
bl21
Oct 21, 2013 at 12:00 pm
Release date Nov. 15th….. half price by May 2014?
Matt
Oct 21, 2013 at 11:21 am
Does it come with a toaster oven?
JL
Oct 21, 2013 at 11:15 am
SLDR is just a name, doesn’t mean there are sliders on the woods. Guess it’s just replacing the RBZs. Wonder what the R1 replacement will look like.
steve
Oct 22, 2013 at 9:58 am
sldr is the new r1. rbz 2 was just released. the tour versions should be available later this year.
steve
Oct 21, 2013 at 9:51 am
where is the sldr weight aspect?
Keith
Oct 21, 2013 at 8:36 am
Kinda funny they say the increased ball speed more than makes up for lower MOI i.e. forgiveness. So your ball will fly farther offline on a miss hit. Hmmmm. That’s better than shorter and in play? Guess I don’t follow that “logic”.
Keith
Oct 21, 2013 at 9:47 am
On the other hand, it may not be that far off line. Gotta try it.
John
Oct 21, 2013 at 3:35 pm
Lol I thought the same thing. “Instead if missing the fairway by a few yards, you can now miss DEEP into the woods!”
Pretty sure a low MOI head that helps by hitting it further offline is why every golfer needs.
BUT! It creates higher launch and lower spin and gives extra yards, so it has to be good.
NG
Oct 22, 2013 at 12:32 am
I think you are all confused between MOI and forgiveness…MOI is so 2000 anyway!
Sparky
Oct 21, 2013 at 5:31 am
When will ladies clubs be available in SA?
Justin
Oct 21, 2013 at 2:02 am
Any word on whether or not Taylormade is going to continue its tradition of Tour and TP models? This one could be going in the bag..
Slaz
Oct 21, 2013 at 12:37 pm
Yes they have TP models for both. The TP version of the Fwy wood is $100 more that the standard version.
Tyler
Oct 26, 2013 at 4:28 pm
Do you know what the difference is between the regular and TP model is?
Kinesin
Oct 28, 2013 at 12:19 pm
The TP is has exactly the same head. 460cc. The only difference is the stock shaft is comes with. The SLDR comes with a Fujikura Speeder 57g shaft while the TP comes with a Fujikura Motore Speeder 63g shaft. So its just a shaft upgrade
Kinesin
Oct 28, 2013 at 12:20 pm
Thats for the driver by the way, not the fairway woods
Kyle
Oct 21, 2013 at 12:31 am
Date of release?
Kyle
Oct 21, 2013 at 12:32 am
Wow read the whole article and missed that it already said November 15. Oops