Equipment

Tech Talk: Callaway Apex Pro Irons

Published

13 years ago

Nov 5, 2013

The ingredients that go into tour-quality “players” irons are usually about the same. They need to have short blade lengths, thin top lines, narrow soles and a minimal amount of offset to meet the needs of the most accomplished golfers.

Callaway’s new Apex Pro irons are no exception, at least at address, where they look nearly identical to the company’s forged players iron from last year, the 2013 X Forged. But when they’re viewed from the back, the irons tell a very different story.

Above: Callaway’s Apex Pro irons (left), look nearly identical to the company’s 2013 X Forged irons (right) at address. The sole designs are also roughly the same.

The Apex Pro irons are forged from the same 1020 carbon steel as the 2013 X Forged, but their multi-material construction and new 37WV grooves bring modernity to the former one-piece design.

In the long irons, for example, Callaway engineers added high-density tungsten to the soles, which lowers the center of gravity (CG). That accentuates the irons’ CG height progression, a weighting scheme that gives the long irons a lower CG that launches the ball higher, and the short irons a higher CG that launches the ball lower.

Evan Gibbs, Callaway manager of performance analysis, says the lower CG of the long irons adds about 1 mph of ball speed to the clubs (compared to 2013 X Forged), and the higher launch it creates makes them more forgiving as well. But in the short irons, where better players tend to create too much spin, the CG was moved higher to help golfers control their trajectory.

The discretionary weight needed for the new mass placement was made possible by the extensive milling of the iron’s cavity, which allowed the faces of the irons to be made 17-percent thinner than those of the 2013 X Forged. But according to Gibbs, that change won’t negatively affect sound and feel, which was tuned with a polymer insert added behind the impact area that helps eliminate the harsh frequencies golfers associate with bad feel.

Above: The 37WV grooves on the Apex Pro irons are wider and not as sharp as the 20-degree V grooves the company used for the 2013 X Forged irons. They’re also duller than the 30WV grooves used on the company’s Apex irons.

Maybe the most intriguing part of the Apex Pro irons is their new groove design, which is the result of extensive testing done with Callaway tour players in 2013. Last year’s X Forged irons had the company’s 20-degree V grooves, which were spaced closely together. But Callaway received feedback from its tour players that the grooves actually spun the ball too much from the rough, causing the ball to launch too low.

Tour players prefer to hit what Gibbs called a “controlled flyer” from the rough, which allows them to hit the ball higher to carry obstacles such as the tops of trees, and a farther total distance as well. But they didn’t want to hit the shot at the expense of consistency.

After much testing, Callaway found that wide-spaced V grooves with 37-degree side walls were the most consistent from the rough, and they offered the additional launch that tour players wanted. While the 37WV grooves will be the only grooves offered at retail on the Apex Pro irons, tour players will have their choice between the 20-degree V grooves, 37WV grooves and even duller 45WV grooves, which launch the ball higher and with even less spin.

Above: Callaway’s Apex Pro irons (left) have slightly shorter blade lengths, thinner top lines, less offset and narrower soles than the Apex irons (right).

They Apex Pro irons hit shelves on Jan. 17, and will sell for $1099 with KBS’ new Tour-V steel shaft, $1299 with UST Mamiya’s Recoil 600 Series graphite shafts. Check out the specs and additional photos in the gallery below.

Click here to see more photos and what GolfWRX Members are saying about the irons in the forums.

Click here to see more photos and what GolfWRX Members are saying about the irons in the forums.

Related Topics:Callaway irons

Up Next

Review: Nike Lunar Bandon golf shoes

Don't Miss

Scotty Cameron to open a public putter studio

Zak Kozuchowski

29 Comments

Rafael

Jun 18, 2014 at 8:07 pm

I read these post and wonder how many have truly tried the Apex pros. I own and love my titleist 714 MB’s. I bought a set of apex irons because they are really excellent clubs. I had longer distance and more good shots than with my MBs. I averaged 10-15 yards more depending on the club over my MB’s irons. The clubs are great deal more forgiving than the MB’s. I was amazed at the high ball flight with the apex irons. I can hit a 6 iron 190-200 yards consistently with the apex irons and with my MBs I would struggle with pure shots and distance. I was more in the sweet spot with the apex irons and so I bought them ASAP. I’ve never hit a gap wedge 135-140 yards. I was flying the ball over the greens with the extra distance. I’m having to re-learn the carry distance of my irons. I could always hit them far but now it happens more often. Don’t get me wrong. They are not beginner clubs and still require good contact. But they are awesome! I’m not selling the titleist I love them too.

Reply Report comment
Steve

Mar 27, 2014 at 2:31 pm

After 8 years enjoying my Titleist 755’s I decided to go buy some AP2’s. While getting fitted the fitter brought out some other clubs and we hooked up to the launch monitor and then went out for some real world results on the range. Hitting of both mats and grass I was amazed that the clubs I wanted were not the APs! The Apex Pro irons were a bit longer, but more importantly the dispersion was much tighter, the feel was butter and the control was great. I can move these around a bit, not as much as the APs, however the big factor was ball speed – consistently 5 to 6 MPH faster. The ball just leaps off the face. I walked out and ordered up my Apex Pros. I’ve played them for two weeks now and wow, what a blast these are to play! Anyhow, I’ve never purchased anything Callaway and had no interest in their products before…after this I’m glad I was open to trying out some different clubs to see which one was going to truly fit and benefit my playing style and swing.

Reply Report comment
Golfer great

Dec 13, 2013 at 11:39 am

Interesting to hear the back insert does not reduce shock. Has anyone hit the Apex pro and Pings new 55 to compare the impact feel?

Reply Report comment
nick

Nov 20, 2013 at 5:52 pm

Great feel on these. Definitely will be replacing the long irons in my xforged set with these.

Reply Report comment
MWP

Nov 10, 2013 at 10:37 am

I’ve hit them and they’re very nice. However, I play the Callaway Prototype irons and was surprised that the polymer insert in the Apex didn’t really make anything feel softer or more forgiving than my fairly traditional musclebacks.

This leads me to the question: CALLAWAY when will you release another true blade?

– A loyal consumer

Reply Report comment
- KK
  
  Nov 14, 2013 at 12:04 am
  
  When more golfers can actually hit them consistently…..which is never going to happen. I think there is a market for “true blades” for people like you and the other 0.00001% of non-professional golfers. I know just as much as anyone who plays the game frequently, golf is hard. Manufacturers, golf course designers, the USGA, need to make the game easier for golfers, not harder. All club companies are in the business to turn a profit, not satisfy the <0.01%. Sometimes, it doesn't make sense to make a club that is only going to account for a very very small percentage of their total sales. If you want "true blades", go buy Mizuno, Miura, Titleist. On the other hand, if you think about it, no club design is advancing less than the "true blade" so go on eBay, buy a used set of Tony Lema blades and you'll never have to buy another set of irons for the rest of your life.
  
  Reply Report comment
  - RDM
    
    Jan 23, 2014 at 10:39 am
    
    I still have my Ben Hogan Apex irons which are eight years old now and it’s great to see Apex back in the mix. I’m sure they will keep evolving and might even loose the plastic backing.
    I have been happy playing Mizuno irons, but will buy a set of Apex irons as soon as they get closer to their original form. Ill certainly check out the latest version!
    
    Reply Report comment
Lee

Nov 7, 2013 at 3:18 am

Callaway can stick them as far as I’m concerned. I shelled out £675 of my hard earned 4 months ago on a set of X forged only now to find them being cleared in the UK for circa £350. Thus my used clubs are worth very little if I was crazy enough to invest another £700 ish on the latest and greatest which frankly wouldn’t make me play any better. I’m so disgruntled I might go and by the new AP2’s and bin the X forged!

Reply Report comment
- Joe
  
  Nov 12, 2013 at 10:13 am
  
  They all do the same. At least they do lower the prices, with the anticipation of the latest and greatest…unlike Titleist who gives nothing a price break…even with the newness rightness to the old.
  It certainly helps people upgrade at a discount. This is especially good with wedges and irons, where the tech doesn’t really change all that much from model to model.
  
  Reply Report comment
  - Nick
    
    Nov 12, 2013 at 4:06 pm
    
    This is a big reason I was happy I got fit into Titlist. They and Mizuno roll out new lines less often so your sticks seem to keep their “newest and greatest” luster a little longer. With TMAG and Callaway I feel like you will be playing “old news” clubs within six months. Not that I have to have the latest and greatest. I’m still playing 712’s and will pass on the 714’s but when you do get to buy new clubs, you’d like to enjoy that feeling of having the latest and greatest a bit longer than a few months, no? Lord knows, you pay for it though.
    
    Reply Report comment
- Wade
  
  Jan 7, 2014 at 12:15 pm
  
  AP2’s cost the same as Apex Pros. Nonsense. You are just sour that you could have waited a year to buy what you have. That’s the way technology works. The older a product is, the more it goes down in cost. How can you not know this?
  
  Reply Report comment
Paul

Nov 6, 2013 at 10:58 pm

pretty!

Reply Report comment
JS

Nov 6, 2013 at 4:32 pm

Take away the Apex name, they’re no Hogans!

Reply Report comment
- Gaz
  
  Nov 7, 2013 at 5:11 am
  
  Mate, they are Callaway clubs. Marketing people use the Apex or Hogan name…….Callaway. That is the manufacturer. Not Mr Hogan, he is no longer with us.
  
  Reply Report comment
- Barry
  
  Nov 7, 2013 at 9:44 pm
  
  Hogans were great in their day……that was many many days/years ago.
  Those Hogans couldn’t compare to today’s clubs.
  We have better technology, better forging & better shafts than yesteryear.
  I will reiterate what Gaz said, it is not a slam on the man, I think it honors him.
  These look amazing!
  
  Reply Report comment
- be_right
  
  Nov 9, 2013 at 9:56 am
  
  +1
  
  Reply Report comment
Gaz

Nov 6, 2013 at 3:53 pm

As a Callaway Icon Professional, I have hit both clubs and the feel is very soft. In fact quite a bit softer feel provided through the apex head……these will be a winner

Reply Report comment
scott dalrymple

Nov 6, 2013 at 1:04 pm

The Apex name seems that Callaway is at least trying to reintroduce the Hogan line. The Hogan Apex and Apex Pro were awesome clubs. I found it odd that Callaway would completely shutter the Hogan brand.

Reply Report comment
- willM
  
  Jan 16, 2014 at 2:43 pm
  
  I still game my Hogan Apex irons. After a custom fit and reshaft with DGs, they feel amazing and produce a great ball flight. I might look to the new Cally Apex as a more forgiving 2,3,4 iron option.
  
  Reply Report comment
  - Greg
    
    Mar 29, 2014 at 10:01 am
    
    It’s in the shafts. Apex pro 6 iron was longer than apex 4 iron. Into the simulator,anyway.
    
    Reply Report comment
cg

Nov 6, 2013 at 12:40 pm

and what will be coming out next month? that will be MUCH better than these?

Reply Report comment
Jamie

Nov 5, 2013 at 2:26 pm

The same money as the legacy black,
Will they perform the same ?

Reply Report comment
Tom

Nov 5, 2013 at 2:19 pm

I’m a fan of the brushed no glare finish.

Reply Report comment
Mark

Nov 5, 2013 at 1:22 pm

SuuuWEET! Can’t wait to demo them.

Reply Report comment
Brian

Nov 5, 2013 at 1:18 pm

Clean looking club and the remind me a bit of the PING S55

Reply Report comment
tyler

Nov 5, 2013 at 11:18 am

Very nice looking club. Price tag is a bit much though.

Reply Report comment
- GolfDad907
  
  Nov 6, 2013 at 1:00 pm
  
  Price is competitive with other major OEMs forged irons, I don’t see a problem with price.
  
  Reply Report comment
Tom

Nov 5, 2013 at 10:58 am

Ummm…I can use that new groove technology that only available to tour players. Other than that I like the look and write up. Great job Zak.

Reply Report comment
- GolfDad907
  
  Nov 6, 2013 at 4:17 pm
  
  All you need is access to Tour rep and can get the grooves you can use 😀
  
  Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putters that never made it: Check out some of the best tour builds that didn’t make the cut

Published

2 weeks ago

May 18, 2026

Alistair Cameron

Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.

So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)

Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.

Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.

Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.

Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.

Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.

Whats in the Bag

Patrick Reed WITB 2026 (May)

Published

2 weeks ago

May 18, 2026

GolfWRX Staff

Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX

3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X

7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X

Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype

Ball: Titleist Pro V1x

Grips: Golf Pride MCC

See more photos of Patrick Reed’s clubs here.

Equipment

Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss

Published

2 weeks ago

May 18, 2026

Gianni Magliocco

In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:

“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.

Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”

And our members have been naming their favorites and why in response.

Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”

Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”