Equipment
Wilson Staff reintroduces its classic 8802 putter
The putter that has won more majors than any other is back. To celebrate its 100th anniversary as a company, Wilson Staff is reintroducing the classic 8802 putter.
Although Wilson used the 8802 moniker earlier, the putter essentially came into being with the “Designed by Arnold Palmer” in 1962. When Palmer left Wilson in 1963, the putter was renamed “The Wilson 8802.” For the next 50 years, the 8802 found its way into the bags of the top players of the world, including Ben Crenshaw, Greg Norman and Phil Mickelson, and it has been a favorite of amateur golfers around the world.
Some 50 years later after its original introduction, Wilson is bringing a new milled 8802 putter to market. And as you can see, it’s a beauty.
Made from 304 stainless steel and featuring the traditional 8802 heel-shafted design, the putter is equipped with a double milled face and a 335-gram head as well as stamping consistent with the original 8802.
A steepless True Temper Head Speed shaft and Lamkin 3GEN pistol grip are standard on the new 8802.
The new 8802 comes with a red and white putter cover that is at once bold and classic, which you can see below. The putter is presently available in only a right-handed model at one length: 35 inches and retails for $179.99.
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
stephenf
Oct 24, 2016 at 9:41 am
Very nice views, Wilson. If you’re going to look at the putter from on the ground up the line, on the ground down the line, or on the ground from behind the heel of the putter, this will give a player a really good idea of what it’s like.
I don’t know why people prefer the Jetsons putters. None of them have the feel you can get by hitting a good forged putter on the sweet spot. They just dampen the feel of bad strikes. It’s not that hard to hit the sweet spot of a putter anyway, which makes it even more inexplicable to me why any pro would use them. If you can’t line up a simple, clean blade and hit the sweet spot at putter speed, maybe you need to go work at it until you can. Then work on hitting the sweet spot on chips and pitches, and work back. Watch what it does for your game.
hells no
May 11, 2015 at 12:10 pm
For all of those looking to make the game of golf harder.
stephenf
Oct 24, 2016 at 9:33 am
For all those who have the minimal skill it takes to hit a putter on the sweet spot.
VoteOutIncumbents
Apr 19, 2015 at 11:02 am
I bought this putter and used it for the first time last week. I remember as a kid my first putter was a blade…I remember (I think, it’s been forty years) being a better putter back then. So I went back to the future with this new blade. On my first hole I made a twenty footer…haven’t done THAT in a while. Made another long one later in the round. It takes a little getting used to because it requires an arc swing that you have to “feel”. So far (one round) I love it!
Mike
Mar 29, 2015 at 7:56 pm
Have The Gentle Ben Walter Hagen 8802. Beautiful putter.
KyleB13
Mar 11, 2015 at 12:00 pm
Got one and it is super smooth and so good looking! Makes you think of putting as an art, not a mental science with alignments, MOI, colors, shapes, arcs, etc. Hopefully I can just roll it half as good as Crenshaw, Palmer, Nicklaus and we’ll be doing good!
Pingback: Want! | A Scottish world of golf
Ponjo
Jan 2, 2015 at 5:20 pm
Just purchased this putter in a 33″ length. The roll is magnificent. Big credit for Wilson turning my order round in 3 days via my Golf Pro.
mario francolini
Oct 14, 2014 at 4:49 am
hi we make a similar putter here in England which is Forged in the Black Country (where the Titanic Chains Were made) and we hand finish them in Warwickshire William Shakespeare country, we make them in two materials 303 stainless and a silicone bronze, if anybody would like to see them i can send some pictures of our work
Brian Conley
Mar 14, 2015 at 11:23 am
Please send me some information.
Thanks, Brian
Steve Bilbrough
Jul 29, 2015 at 7:03 pm
Would be interested to see your 8802 style putters in 303 stainless and silicone bronze. Pl;ease send pico’s and pricing.
Thank you … Steve
stephenf
Oct 24, 2016 at 9:34 am
send send send send SEND
M.
Aug 24, 2014 at 9:47 pm
Let Tiger have his fun with the stack and tilt bandits, and when his done I’m sure we’ll see him over at the dirt doing the twirl with Elk
bradford
Aug 27, 2014 at 9:22 am
wrong thread?
tom
Aug 14, 2014 at 2:08 am
Have the early 8802, the reissue and the Palmer model. I have used them for years. I really like the reissue but I got to say I like the look of the new one. I swore I was quitting buying the putters but I should never say never! Shouldn’t you put your money into the club you use the most?
LeoLeo
Jul 25, 2014 at 9:59 pm
I have the “Original” Wilson 8802 which was obviously not the original that I bought around 1982. It has a dull pickle finish no the shine of the original. It’s so simple compared to all the space ship shaped putters out today.
Shallowface
Jul 25, 2014 at 8:13 am
Love the direction in which Wilson is heading!
luc van heirweghe
Jul 14, 2014 at 10:20 am
Dear Sir/Madam,
I’m particularly interested in buying a Wilson Staff 8802 – putter but cannot find a stie on which to buy one. Can you offer any assistance ?
Jeff S
Jul 14, 2014 at 9:24 pm
You can buy one directly from the Wilson website.
stephenf
Oct 24, 2016 at 9:35 am
Also give the Palmer or Old Master replicas a look.
bobbycj
Jul 11, 2014 at 11:25 pm
I’ve played the 8882 blk for the past few years. I think the head is fairly heavy (350 gm), I love it, very consistent roll, I like the milled grooves. Have a Winn pistol grip (oversized) on it. I saw a new 8882 the other day in the shop for $79. I think $179 for a 8802 is steep unless you get it just for nostalgia…if that’s the case get an original on ebay for $40. If you’re getting it to actually make putts just get the 8882. Or, just get it to look like a big shot on the practice green. I can’t say enough good things about the 8882 blk. I like the Napa toe hang style putter and hit one whenever I can to see how it compares against the 8882 blk. I’ve yet to find one better
Jack
Jul 9, 2014 at 4:29 pm
Bettinardi made a blade similar to the 8802. I have it my bag. It’s the real deal.
This particular is no longer in production. If you find one buy it.
Mike Webber
Jul 3, 2014 at 3:48 pm
I think the original Wilson putter was made of a heavier metal, which I believe was Pot Metal. Unlike today’s version of stainless steel, which has a livelier face upon contact, the heavier putter was referred to as being almost dead. That means you hit the ball as far as you wanted it to go. To me that’s a step ahead of today’s blended metals in which their is a measured amount of guess work. While I’m at it, I also have to give me regard to the Staff Irons of the mid 60’s through 1971. I still play the button backs.
David Findla
Jul 10, 2014 at 1:54 pm
I was told many years ago that the original 8802 was made of metal from scrapped WWII warships.
Joe Duffer
Jul 23, 2014 at 12:41 pm
The original Wilson Palmer and 8802 putters were made from 1030 carbon steel.
Truth Hurts
Mar 16, 2015 at 11:06 am
The amount of nonsense in the world of Golf regarding Putters reminds one of the alchemy of the Middle Ages.
Grant
Jul 3, 2014 at 11:10 am
My 1970’s model 8802 is looking at me from the bag
Best feeling putter ever. Ihave some old green shafted Ironmaster’s that also feel good. Never have any doubt whenIuse the 8802.
Pingback: Wilson Staff reintroduces its classic 8802 putter | Spacetimeandi.com
Neil Cooney
Jul 2, 2014 at 6:35 am
What Retail outlets in Ireland can new “retro” putter be bought through ??
tlmck
Jul 2, 2014 at 3:34 am
I wish they would remake the old “Flag Hi”. Basically the same as 8802 except for less flange. More solid hit as well. Mine is has decades of bag chatter, but is still gameable.
Boo
Jul 1, 2014 at 11:48 pm
The putter head is just too light at 335 grams. Wish they could make it more in the 350 plus range!
Mike
Jul 1, 2014 at 10:18 pm
Originally was made from pot metal not stainless steel
Joe Duffer
Jul 23, 2014 at 12:44 pm
Wrong… they were made from 1030 carbon steel.
Cwolf
Jul 1, 2014 at 3:51 pm
Buttah
Chuck
Jul 1, 2014 at 1:45 pm
Ummm, somebody please correct me if I am wrong. But the classic Wilson Head Speed shaft was a STEPPED shaft.
So if Wilson is selling a shaft that is stepless, but is calling it (as is no doubt their proprietary right) “Head Speed”, it is something else entirely, right?
Wilson has made lots and lots of 8802 variants and reissues over the years. I would have thought that the modern challenge would have been to absolutely faithfully re-create the orignal “Designed by Arnold Palmer.”
I
Jul 2, 2014 at 3:40 am
Inane comment
Bill Morrell
Jul 3, 2014 at 1:53 pm
I have owned three original (1964) 8802’s and one Designed By. All had 5 step shafts with green shaft bands. Why Wilson wouldn’t use this in their “tribute ” putter is baffling at best.
Lee Richardson
Sep 13, 2014 at 11:12 am
Want to part with one of the originals?
Reid
Jul 1, 2014 at 1:31 pm
I’ve loved every past model including the original and still have a ton in my collection. This is a definitely must add for me!