Connect with us

Equipment

Cleveland to launch new MyCustomWedges

Published

on

Cleveland is set to launch a new custom wedge website in late February that will allow golfers to customize the company’s newest line of wedges.

Cleveland’s “My Custom Wedges” site launched in 2013, and allowed golfers to personalize paint fills, stampings, finishes and skins of the 588 RTX Forged wedges to their liking. The new microsite will feature new grinds and customization options for the company’s new RTX Custom wedges, which use the same technologies as 588 RTX 2.0 wedges.

mcw_01

The wedges will be available in two finishes: raw, which will rust, and black satin, which won’t. The personalization system will also have more skins, paint colors, engraving options, logos and custom shaft options than the original MyCustomWedges website.

The new wedges will be available in 11 different models and lofts from 48-to-60 degrees. The 56- and 58-degree wedges have two grind options, standard and low bounce, while 60-degree wedges are available in the three grind options below:

  • Low bounce: Sole is 0.75 inches wide, 6 degrees of bounce
  • Standard: Sole is 0.75 inches wide, 12 degrees of bounce
  • Wide sole: One-inch wide, 8 degrees of bounce

The low-bounce grind is for golfers who play in firm conditions or have shallow angles of attack, while the wide-sole grind will work best for golfers who have steeper angles of attack or play in soft conditions. The standard sole grind takes the middle ground.

60w_mainView

Even though it’s a niche-design, Cleveland’s wide-sole grind may prove to be the star of the line. According to Patrick Ripp, Research and Business Solutions Engineer for Cleveland, many golfers have found that wide-sole wedges can create more consistency around the greens.

The wide-sole grind was created with feedback from Cleveland Tour players, some of whom wanted a wider sole with more bounce, but still wanted the leading edge to sit close to the ground, especially on open-faced shots.

How do you know which grind is right for you?

Cleveland’s wedge analyzer, which works in conjunction with SwingByte, helps simplify the process for any golfer, and offers wedge recommendations based on a golfer’s angle of attack and typical course conditions.

Aside from the new wide-sole grind, most of the grinds and bounce options from Cleveland’s custom wedge line are available on the wedge analyzer.

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

10 Comments

10 Comments

  1. RH

    Feb 17, 2015 at 9:30 am

    Really wish there was a chrome satin type finish.

  2. Nathan

    Feb 17, 2015 at 8:11 am

    I wonder if Scratch Golf is going to be upset that Cleveland is ripping off their model?

  3. Brian Williams

    Feb 16, 2015 at 9:55 pm

    Much like coors light who uses gimmicks like lined cans and mountains that turn blue when cold, because they make an inferior product. If you want good wedges buy some vokeys

    • Teaj

      Feb 17, 2015 at 8:33 am

      your one of those eh!

    • christian

      Feb 17, 2015 at 7:38 pm

      Yeah, because Cleveland doesn’t have any legacy or tour presence at all when it comes to wedges..Practically a cocky newcomer. Riiight

      • John

        Feb 18, 2015 at 11:48 am

        Cleveland doesn’t have a Legacy? Haha Im guessing you think Cleveland copied Vokey too huh? Finding educated comments on this site is becoming rarer everyday.

        • Justin

          Feb 19, 2015 at 10:37 am

          John I think your sarcasm detector is off…

  4. Jamie V

    Feb 16, 2015 at 6:32 pm

    Of course it says sold out, that’s from last years model. This years model doesn’t open until late February.

  5. Lane

    Feb 16, 2015 at 3:27 pm

  6. Mike

    Feb 16, 2015 at 12:21 pm

    This is awesome! I would love to swap my RTX 2.0s for the raw version. SWEET!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putters that never made it: Check out some of the best tour builds that didn’t make the cut

Published

on

Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.

So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)

Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag. 

Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy. 

Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter.  Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag. 

Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.

Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.

Continue Reading

Whats in the Bag

Patrick Reed WITB 2026 (May)

Published

on

Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX

3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X

7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X

Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts:  True Temper Dynamic Gold Tour Issue X100

Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype

Ball: Titleist Pro V1x

Grips: Golf Pride MCC

See more photos of Patrick Reed’s clubs here.

Continue Reading

Equipment

Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:

“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.

Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”

And our members have been naming their favorites and why in response.

Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
  • ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”

Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending