Equipment
Parsons PXG irons and wedges now available at Cool Clubs
Parsons PXG 0311 irons and wedges, previously shrouded in mystery, are now available exclusively at Cool Clubs fitting locations — and as indicated by the upstart equipment manufacturer website, they’re not cheap.
Below are the prices per head for PXG 0311 irons and wedges:
$300 Stock Shaft Options
- KBS TOUR 90
- KBS TOUR
- KBS TOUR-V
- Nippon 95
$325 Stock Shaft Options
- KBS C-Taper
- Nippon Modus
$350 Stock Shaft Options
- Fujikura Pro
- Aerotech 95I
You might think Parsons’ screws are loose, but they do have peers at this price point. For comparison, Miura 001 irons sell for $235 per head, while Epon irons sell for $280 per head.
If you want to own a set of Parson PXG irons or wedges, you’ll need to set up an appointment at one of your local Cool Clubs fitting locations.
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
Jim
Jul 30, 2016 at 1:10 pm
Bought set, no better or worse than typical
Clubs. Showed wear very quickly.
Parsons has plenty of cash, soon to have less!
Evill Czar
Jul 1, 2016 at 11:51 pm
I bought a complete set of PXG’s and went from a 15 index to a 2 in 3 days. I simply write down bogus scores but man do I look cool with these sticks on the back of my cart. Nuff said about the insanity of $300/iron.
CB
Mar 18, 2016 at 7:53 pm
Love all the people complaining about $300 a club when I’ll bet all of them have dropped at least that on a driver and/or spent a grand on a set. If there is no difference in clubs between these and AP2, why is there a difference between AP2’s and a $200 set of Taylor Mades?
TBone
Feb 13, 2016 at 9:04 am
Just went all in with PXG gear. Driver-Putter. I’ve had them all (Miura,Edel and all the major OEM Brands). Never have hit an entire set like these. Can’t find a weak spot. The driver is a beast with the correct settings and the Mustang putter is second to none. I would normally not play a 4 iron but am consistently hitting PXG 4 iron as if it was a 7 iron. Very expensive, but worth every penny in my opinion. Instead of trading in and out and spending the 5K eventually. Just go all in 1 time and bite the bullet. Won’t ever need another set to compete with these. Hard to beat my friends.
Jp
Feb 2, 2016 at 3:12 pm
This guy is out of his mind, I have played the game for 20 years and I can say that no club will make you a pro and 300 for head and no shaft DAM SHE BETTER BE REAL GOOD,
Jp
Feb 2, 2016 at 3:05 pm
I’m not sure what this guy is thinking but I can tell you I have played the game for 25 years and unless your are a pro or spend the time it takes to be a pro there is not a club out there worth this kind of money, what person I there right mind would spend this on head I mean she must be really good for me to spend that much on head and no shaft.
godzilla from the garden route
Jan 10, 2016 at 3:13 pm
O my sack!!! Ive got screwed titleist 714 @ $75 per club. Anyone interested? Think johnson is struggling to keep up with spieth with screws. Hahahaha
Nolanski
Jun 11, 2015 at 9:58 am
Gotta spend money to make money! Haha!
DonW
Jun 1, 2015 at 1:44 pm
Interesting concept.
Just a bit expensive.
I wonder how much each screw will cost if you want to make adjustments.
Nate
May 28, 2015 at 2:31 pm
I think everyone is forgetting that the target market (and people who should be playing a blade) is less then 1% of the golf population. Research has been done by the current major golf retail stores as to their demographics income. Typically the people who would purchase this style iron are more then capable to afford them at the high price point. Yes overall compared to PXG’s competitors I think the price is high, but is it worth the higher price? That all depends on what the PXG’s do for you. Personally I like the concept around the moveable set screws. It is much better than trying to reposition lead tape. If this was a game improvement style iron at this price point then yes Parsons is off his rocker, but this is a professional/players club.
Neil
May 27, 2015 at 8:37 pm
This company must be on dope.no way 300 a club..
BustyMagoo
May 27, 2015 at 9:20 pm
More like a billionaire owner (Bob Parsons, founder of GoDaddy and hunter of African elephants) out of touch with reality. Or maybe he just wanted to target his ultra rich friends. Either way, I’m not buying from that slimeball. They do look nice though, albeit a tad gimmicky. I have to tip my hat to the engineers. I’m guessing they won’t be having demo’s in my area any time soon.
BustyMagoo
May 27, 2015 at 7:51 pm
So this is the club you get when a billionaire wants to dabble in the golf world. At least he’s not out shooting elephants in Africa.
LMAO
May 26, 2015 at 10:58 am
LMAOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO good luck I was considering giving these a look but for $300 a club only a person with more money than sense would by these. Get a normal set of clubs, take your savings from these and pay for some lessons
Curious
Jul 24, 2016 at 8:33 pm
What if you used to be a +4/+5 and now you are a 2-4 handicap that doesn’t get to play much because of work and family? Would you not pay to look at a head that looks like the blades you are familiar with from the past and avoid that clunky GI iron?
Also, $300/head, I get it, it is a lot of money for an iron, traditionally speaking. In the grand scheme of things $300 is not that much money; disparaging brands or others because they have discretionary income isn’t really the best look for the golf community.
Last I checked, the entire sport is based on discretionary income with an absolute $0 ROI.
RG
May 24, 2015 at 7:56 pm
$300-$350 a stick?!?! That’s screwed up. I give it 9 month’s.
Tom Duckworth
May 24, 2015 at 1:33 pm
So I read these are basically hollow heads filled with plastic. I wonder how much weight you can move around with the screws? I just can’t see ever buying these at that price point. There is no way they are that much better than any of the other top brands. Just a reminder to me that you can’t buy a good golf game.
Ken
May 23, 2015 at 8:06 pm
I’m getting a set … In 6 to 9 months. They’ll be on eBay for $79 a stick.
BallZDeEp_4DaYz
May 23, 2015 at 11:41 pm
I hate to be a jerk but I don’t see how a domestic startup golf OEM can expect to sell enough units, at the advertised price point, to stay solvent. Best of luck to the folks at PXG but I’m not holding my breath on this one…
Curious
Jul 24, 2016 at 8:35 pm
Perhaps it is a greater investment into the game of golf from a technology standpoint. If the concept is sounds other OEM’s will certainly adobt it. Relax, time will tell.
Steve
May 23, 2015 at 10:02 am
This company will be out of buisness in a year, unless the owner keeps dumping money into it. How can you justify the price point? You can buy mizuno, pings, titleist and have $1500 left to spend. Or miura’s for $500-$600 cheaper. The only players that will buy these are are ones with more money then sense
MHendon
May 23, 2015 at 1:16 am
To justify that price I better hit 80% of my greens.
Trent
May 23, 2015 at 1:16 am
I was able to try these the other day. They are an extremely solid and stable head from the LW through the long irons. They set up quite like a set of Ping S55’s, but are much more forgiving. Ball flight was nice and penetrating and relatively long as well.
RG
May 24, 2015 at 7:41 pm
How long have you worked for PXG?
DB
May 22, 2015 at 7:22 pm
Haha, lots of people kept saying they were going to buy these…
Haha, $300 per club. So $3k for irons and wedges. Plus tax. I’m guessing 95% of the original “buyers” have now changed their mind.
Adam
May 23, 2015 at 11:45 am
Count me as one of those. If they were maybe a slight premium above the OEMs I’d buy them for sure, but 3x the price of G30s and AP2s? No thanks, even if they can prove it’ll improve your distance by X, it’s just a simple cost/benefit decision.
KCCO
May 22, 2015 at 6:19 pm
I can’t make up my mind with these irons/wedges….I thought they were growing on me, I like shape, and look from address, but 6 irons at >$1800+ Is a lot for some screwed up irons, lots of options at that price. Where did Parsons come from? Meaning another OEM? Or is that just company’s name?
Mix
May 22, 2015 at 9:58 pm
Parsons was the creator of Go Daddy, he left there when they went public and started his own boutique golf club business.
Steve Wozeniak
May 22, 2015 at 5:41 pm
At first I loved all the screws in them……now they just look stupid…….is it just me????
Golfraven
May 22, 2015 at 1:45 pm
Too much going on with those srews for my liking & at a price tag around 3K$ bit overpriced. I am sure some folks will buy it but they not sell like hot cakes.
Jericho
May 22, 2015 at 12:09 pm
I’ve owned 3 sets of Miuras including the baby blades ..I’m thinking there prices are head/shaft ..$300/$350 per club ..love the size..smaller compact head ..top line has a little more width like the apex mb ..and top toe is shortened so at the address position looks even shorted toe to heel ..I just question the offset ..I hope it’s just the camera angle ..or at that rate the p wedge would look hideous..714 titleist mb has a nice looking offset..Miura baby blades have perfect offsets in their p wedges ..mizuno mp-4 is a little too much offset for me ..in any case would love to hit these for all I know they could be great
Dj
May 22, 2015 at 11:52 am
Lol. Good luck.
Adam
May 22, 2015 at 11:23 am
Is this incomplete? I don’t see the pricing unless you meant for us to assume that the price above the shafts is the “per head” price in those shafts.
u radioactive
May 22, 2015 at 3:35 pm
Yes that’s what it means