Equipment

Ping G irons: What you need to know

Published

10 years ago

Jan 11, 2016

Ping’s G irons (MSRP $110 per club with steel, $125 per club with graphite) will be in stores February 11. They’re available in 4-9, PW, UW (50), SW (54), LW (58). Default color code is yellow. Stock swing weight is DO-D4.

Ping’s Stock Shafts: AWT 2.0 (R, S, X), CFS Graphite (65SR, 70R, 80S)
No Upcharge Custom Shafts: True Temper Dynamic Gold (S300, X100), True Temper Project X (5.0, 6.0), True Temper XP 95 (R, S), Nippon N.S. Pro Modus3 105 (S, X)

What you need to know

The G irons use Ping’s COR-Eye technology, which debuted on the company’s super-game-improvement G Max irons that were released in July 2015. The fast-face technology gives the irons higher ball speeds, as well as a higher launch angle because of the bending mechanics of the club face.

Previous G-Series irons were known for their impressive forgiveness – Ping’s G30 irons were the top-rated irons for forgiveness in our 2015 Gear Trials Club Test – but they tended to fly shorter than their competitors. COR-Eye not only improves distance, but improves the overall forgiveness of the irons as well.

The G irons have a moment of inertia (MOI), a measure of forgiveness, that is 1.5 percent higher from heel to toe, and 5 percent higher from top to bottom compared to the G30 irons, according to Ping.

When comparing 7 irons, the G irons are approximately 5 yards longer than the G30 irons, according to Ping. The company’s testing of the new irons showed a ball speed increase of 1.25 mph, a 0.5-degree higher launch angle and 250 rpm less spin rate.

Comparatively, most golfers will see even more distance from the G long irons. The distances the short irons fly will be more similar.

The G irons are cast from 17-4 stainless steel. Their two-stage construction process takes six hours to complete, Ping says. The special heat treatment process used to make the G’s Hyper 17-4 club faces increases strength by 40 percent, compared to the G30 irons.

To make room for the G’s increased face bending at impact, Ping pulled its CTP (custom tuning port) away from the clubface, creating a wide, deep undercut. A thicker badge in the cavity of the irons manages the added vibrations from the irons’ thinner, more flexible faces.

The sound of the G irons is a cross between the company’s G Max and G30 irons. “The acoustics tell you there is more speed,” said Marty Jertson, Senior Design Engineer for Ping.

Ping’s G (6 iron) and G30 (right) at address.

At address, the G irons appear to have thinner toplines than the G30 irons. While the width of the toplines is essentially the same, they were given a bevel that makes them appear about one-third thinner. The irons also have a slightly different toe shape, with a low toe that has been extended, and a higher peak.

The soles of Ping’s G (left) and G30 irons.

Ping made the soles of the G irons slightly wider, but they play effectively thinner because of sole relief added to the back of the sole.

Ping’s G irons debut the company’s new AWT 2.0 shafts, made by Nippon, which have an ascending-weight design. In the R flex, shaft weights range from approximately 95 grams (4 iron) to 105 grams (wedges). In the S flex, weights range from 100-110 grams. In the X flex, the weights range from 115-123 grams.

G Iron Specs

Related Topics:irons Ping

Up Next

Callaway’s new XR OS irons and hybrids

Don't Miss

Ping G Fairway Woods, Hybrids and new Crossover

Zak Kozuchowski

18 Comments

Jamz50

Jun 20, 2018 at 7:08 pm

I still use the I2 irons on my third set. A seven iron is a seven iron regardless of the number on the sole of the club.

Reply Report comment
Luke

Jun 14, 2016 at 2:46 pm

I agree they look ugly, but if they make the game easier who cares. There ain’t no pictures on the scorecard.

Reply Report comment
Ruth

Apr 1, 2016 at 5:51 am

I just got my fitted G irons today and tried it at the driving range. It added 10 meters to my distance and its so forgiving. Can’t really feel the ball on contact and added more height to the shots with added distance. Nice.

Reply Report comment
M-Herd4

Feb 19, 2016 at 3:43 pm

The back of the cavity looks eerily similar to the Cobra FLY-Z irons with the harmonic insert which were released at the end of 2014.

Reply Report comment
Adrian Thomson

Feb 10, 2016 at 2:50 pm

Playing Ping since 92 & had many sets, last Dec changed to the GMax, big mistake don’t like them, just waiting for the new order of the new G, Irons, not convinced any more that Ping are so great, if these don’t work then a switch to Callaway Irons, like a previous comment already made they are not fair G30 is still a new Iron really.

Reply Report comment
- KoKo
  
  Apr 22, 2016 at 10:27 am
  
  GMax are max-game improvement irons and not comparable to the G series IMO. There is a huge feel difference having tried them I couldn’t possibly consider them for my own game (currently using G25). I’ll stick with the G25 or maybe move to the G – I tried the “i” as well which I really like but they are lower trajectory.
  
  Reply Report comment
Birdiedog

Feb 6, 2016 at 8:00 pm

Just got fit for a set, took the seven on the range and striped 23 out of 25. That said, I’m older and have an artificial right hip, so my top club head speed was 85. I’m 61and have een playing since I was eight and this is by far the most forgiving golf club I’ve ever swung. For me to swing the club at only85 miles an hour And fly a 7-iron 155 yards with a slight draw is huge. Had no trouble working it left to right, either.
I’m all in. I ordered mine.

Reply Report comment
Mark Combs

Jan 29, 2016 at 9:00 am

After playing Ping irons for many years, I switched to Callaway and play their Apex irons. I always loved the look of Ping G series irons, I played the G10, G15, G20, and G25. I think these irons are just plain ugly. I don’t like the finish, which is something I always loved about their irons, the dark finish always wore well. Plus, the junk they’ve put on the head of the driver looks ugly as well. I also switched to the new Callaway Big Bertha driver, which has a smokey gun metal finish, which reminds me of something Ping used to make. I feel like Ping has really lost it’s way and is headed in the wrong direction. They should have come out with a G35 that was “better” and waited the appropriate amount of time. It should be noted they brought these out quicker (less than 2 years) to replace the G30, this is unusual for Ping, so obviously the G30s were not moving….Sad, this was a great company, I think Callaway is taking market share from everyone right now

Reply Report comment
frank freeze

Jan 22, 2016 at 11:18 am

If i was a buyer of the G 30 irons i would be quite pissed about the statement that those irons being 5 yards less and less forgiving than the new ones shown above. It seems to me that they should get it right and not keep coming out with a new “set” of clubs each year or every two when they charge you a grand for a new set of clubs. Or they should have a buy back program that allows a golfer to get 80% of the value of the old clubs towards the new set if a new set is released within two years of the old set…….Hmmmm just a thought!!! I do play Ping I-20 and love them but it seems to me that Ping is becoming a taylormade or callaway and just producing new clubs without really creating a new benefit to the average golfer…..Just saying!

Reply Report comment
Rich

Jan 14, 2016 at 7:22 am

“The acoustics tell you there is more speed”. This statement worries me. Callaway and TM have made some awful irons that sound like you’re hitting something so harsh. Hope Ping haven’t gone down the same path.

Reply Report comment
- WILSON!!
  
  Jan 20, 2016 at 6:08 pm
  
  Are you crazy? Ping irons have always felt harsh. “heat treatment that makes them 40% harder” eh? I didn’t know that was possible.
  
  Reply Report comment
  - Dave e
    
    Jan 21, 2016 at 8:41 am
    
    Got fitted for these at ping gainsborough. Really smooth irons with lots of forgiveness and good distance even on mishits. No harshness either. Needless to say mine are on order ready for the release date.
    
    Reply Report comment
TMP

Jan 11, 2016 at 8:25 pm

Is it Taylorping or Pingmade? Either way, that is one fugly iron

Reply Report comment
jgpl001

Jan 11, 2016 at 4:43 pm

I seem to remember TM being slated for jacking up iron lofts….27 deg 6 iron here, but its Ping, so nobody will complain!!!

I sure they perform well (as all Ping clubs do), but God they do know how to do ugly

Reply Report comment
- xring
  
  Jan 11, 2016 at 5:30 pm
  
  Looks like the 2008 TM burner as well. I am a Ping fan and currently play them but find the look recycled. Ditch the baby blue inlays as well.
  
  Reply Report comment
  - WillyE
    
    Jan 11, 2016 at 7:05 pm
    
    Play PINGS and have for years. They are losin me..
    
    Reply Report comment
Jim

Jan 11, 2016 at 12:17 pm

I don’t particularly like the Cor Eye badge but everything seems pretty nice including the new bezel and trimmed top line. Can’t wait to read some full playing reviews too.

Reply Report comment
Greg V

Jan 11, 2016 at 11:05 am

A Nippon AWT shaft – I’m quite interested.

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

1 day ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

1 day ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules