Equipment
Not Dead: Ben Hogan Golf Equipment Company announces restructuring
After rumors circulated this morning on social media that the Ben Hogan Golf Equipment Company had laid off all its employees and was going out of business, the company responded with a press release that calls the reports “greatly exaggerated.”
“While our organization does not look the same today as it did in 2016, we are confident that the changes we are making will make us a stronger and better company in the future,” said Ben Hogan Golf Equipment CEO Scott White.
According to the release, the Fort Worth, Texas-based company is going through a voluntary reorganization with the stated goals of minimizing expenses and streamlining operations — “approximately 30 [employees]” were laid off, according to Golf Digest, and “CEO Scott White said it hoped to rehire some as contract employees.”
“The company has not declared bankruptcy nor been foreclosed upon, and remains in the business of producing and selling the highest quality and most precise golf equipment in the world,” the press release said. Company representatives did not return calls from GolfWRX for comment.
The Ben Hogan Golf Company was re-launched under the leadership of golf equipment industry veteran Terry Koehler in 2014, who worked at the original company founded by nine-time major championship winner Ben Hogan. The company is best known for its lines of forged irons and wedges, which are sold in individual lofts (20-63 degrees) to help golfers improve their distance control and gapping.
Koehler stepped down as CEO this summer, and was replaced by Scott White.
Equipment
Putters that never made it: Check out some of the best tour builds that didn’t make the cut
Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.
So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)
Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.
Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.
Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.
Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.
Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.
Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX
3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X
7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X
Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype
Ball: Titleist Pro V1x
Grips: Golf Pride MCC
In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:
“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.
Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”
And our members have been naming their favorites and why in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
- ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”
Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Aaron Rai’s winning WITB: 2026 PGA Championship
Nelly Korda WITB 2026 (April)
Justin Rose on the switch to McLaren Golf, learnings from previous equipment moves
Photos from the 2026 PGA Championship
Patrick Reed WITB 2026 (May)
Driver: Titleist GT3 (9 degrees) Buy here. Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX 3-wood: TaylorMade Qi35 (15 degrees)...
Aaron Rai’s winning WITB: 2026 PGA Championship
Driver: TaylorMade M6 (9 degrees) Shaft: Aldilda Synergy Blue 70 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Blue...
Michael Block WITB 2026 (May)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Black VeloCore+ 5 X 3-wood: TaylorMade Qi4D (15 degrees @14.25) Shaft: Mitsubishi...
Bryson DeChambeau WITB 2026 (May)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X Prototype 3-wood: Krank Formula Fire (10 degrees) Shaft: LA Golf BAD...
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks ago
Aaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment2 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
-
News2 weeks agoWITB Time Machine: Phil Mickelson’s winning WITB, 2021 PGA Championship
-
Equipment2 weeks agoWhich of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
-
Equipment2 weeks agoLead Tape Report: Adjusting the swingweight of the Wanamaker Trophy
Mike
Jan 28, 2017 at 1:03 pm
Need to get some bags out on tour so people can see the name. Most golfers don’t know the history of Hogan clubs. Need someone to come in and help with business model
rex235
Jan 12, 2017 at 7:30 pm
Dead?
The “new” Ben Hogan Golf Company has always been RH Only.
Apparently they chose to ignore what Ben Hogan wrote in “Power Golf”.
JThunder
Jan 9, 2017 at 5:05 pm
“Restructuring” = keep CEO and mgmt pay high, lay off and cut back on everyone/everything else.
Never works, just delays the inevitable. Allows the “company” to be milked another year or two.
As with Scor, the necessity of having a club for every single loft is both costly for the mfr and stores, and confusing for the vast, vast majority of non-super-tweak-Golfwrx golfers.
In other words, it’s a fine business model if you want to corner a niche and make a fair income. A horrible, awful idea if you want to “crush the competition” and become major. According to every “business” thread on Golfwrx, the latter is the only reason to get into business. See: Toulon selling out, Miura selling out, Nike giving up… etc.
John Schwartz
Jan 9, 2017 at 12:19 pm
Anyone know where I can purchase a set of Fort Worth iron at a discount?
Mike t
Jan 4, 2017 at 9:49 pm
Tough market under best of circumstances. Big 5 dominates and traditional blades are a hard sell.
Pavel
Jan 4, 2017 at 2:27 pm
Sorry to hear about problems at BH.
I got a few SCOR wedges a few years ago, really liked them.
Heard about BH ramping up, got some mid-irons, really like them.
After working a bit of a deal with BH, replaced the SCORs with BH wedges, really like them.
Realized that some of the clubs had the wrong grip size, worked with BH, got the right grips and credit off a new VKTR hybrid, which I really like, to pay for local regripping.
Overall price was no worse than the Ping i15s I got when I (re-)entered golf back in 2010.
I’m a happy camper, BH-wise. I hope they succeed, but will play these clubs regardless…
My 0.02.
BIG STU
Jan 4, 2017 at 1:39 pm
I do know that all but one guy on another site that tested them has dropped them. I looked at a set at PGASS and did not like the way they sat period and I am a blade player. I do know some of the devoted classic Hogan fans did not like them either. But hey I wish the company all the luck in the world
Mat
Jan 3, 2017 at 10:55 pm
New tech? No.
New sales method? No.
New fitting method? No.
New look? No.
Bespoke design? No.
Wide range of no-upcharge shafts? No.
But damn it, we have BH and the loft on there!
Pulling a Nike in 5…4…3…
Boobsy McKiss
Jan 3, 2017 at 10:06 pm
ROFL at the creative banter in here. +1 to you fellas.
Would not want to be in the business of making golf equipment these days. Have to move a lot of clubs to pay for all that overhead and R&D. Sounds like Hogan didn’t have much of the later though.
Rich Douglas
Jan 3, 2017 at 9:50 pm
I loved my Hogan Edge irons, the first cavity-back forged iron offered by a major manufacturer. But that was 1992. What’s changed? Individual loft numbers instead of club numbers? Really? That’s just a gimmick, and not a very good one. After all, you might find yourself tweaking lofts on a normal set anyway, and you can’t possibly know which exact lofts will provide the distances and gaps you need; you might find yourself tweaking these lofts, too.
I sold them when I realized I needed more help (I was a 16 back then, a 6 now) than those barely-cavity almost-blades could provide.
The company is going to need something else.
Jack
Jan 4, 2017 at 2:33 am
LOL yeah who remembers the loft of their 7 iron? and all 9 other irons? Terrible idea that required people to relearn something that made the game even more difficult.
farmer
Jan 3, 2017 at 9:26 pm
I have hit the new Hogan irons, and they were fine. There’s the problem, there are a bunch of irons that feel fine, with real distribution networks, a presence in the retail world. Hogan has none of these. Remember when Scratch was all the buzz? Same issues, and Scratch is no more, even though they made fine irons.
Lowell
Jan 3, 2017 at 8:38 pm
As everything else in life you either reinvent your product to attract new buyers or be left waiting for the traditionalist to buy your product. I loved Hogan clubs back in the day but lost touch and never had a reason to go back. I hope they make it but somebody is starting to write on the wall. I give them a dumb and dumbest chance. Go Loyd!!!
KK
Jan 3, 2017 at 6:50 pm
Anyone really surprised? Ben Hogan Golf Co. is trying to sell 80s clubs in 2016.
Buck
Jan 3, 2017 at 8:24 pm
By 80’s clubs, do you mean ones you can’t hit? Just kidding.
I don’t believe there’s anything wrong with the clubs themselves. As others have already stated, it was their business model that sealed their fate.
Matt
Jan 3, 2017 at 6:15 pm
They seem to be very expensive.
Lowell
Jan 3, 2017 at 8:40 pm
I remember in the early 2000’s when a buddy of mine flew to their home office, got fitted and left with a new set of clubs. I think it was somewhere in the neighborhood of $3000. Not sure what else you got.
bogeypro
Jan 3, 2017 at 4:09 pm
If they would just put iron numbers on their clubs….I’d probably look at them. Great equipment with a weird idea.
Brian
Jan 3, 2017 at 4:13 pm
They started doing that last year, in addition to the lofts.
McPickens
Jan 3, 2017 at 5:39 pm
“…started doing it…” poorly. Awful looking etch job. Should have stayed with traditional numbering with custom lofts.
John H. Brink
Jan 3, 2017 at 4:59 pm
Trying to deal with them directly was exasperating at best. Those who offered to help open sales territories were basically ignored. Flawed sales strategy and clubs priced to line someone’s pockets.
Feel the Bern
Jan 3, 2017 at 3:36 pm
Seems to me Ben Hogan would be rolling in his grave if he were still alive.
Captain Obvious
Jan 3, 2017 at 3:45 pm
Seems to me that if he were still alive, he wouldn’t be in his grave.
Double Mocha Man
Jan 3, 2017 at 3:47 pm
Ah, living up to your username, I see.
RanchoBob
Jan 3, 2017 at 4:02 pm
Actually, if he were alive he’d be in his grave scratching at the lid.
*ba dum tss*
Feel the Bern
Jan 3, 2017 at 5:02 pm
Just seems that news like this would make good ol’ gentle Ben glad he isn’t around to see his name tarnished.
Hawk
Jan 3, 2017 at 5:21 pm
I don’t believe that the word “gentle” was ever used to describe Hogan. Gentle Ben Crenshaw, yes. Gentle Hogan? Not quite.
the bishop
Jan 3, 2017 at 5:35 pm
A guy I know relayed a personal Ben Crenshaw story that might make you rethink the term “Gently Ben” as well.
Feel the Bern
Jan 3, 2017 at 9:06 pm
He’d be pretty ornery if he heard you say that. Hope he doesn’t have the internet in heaven.