Equipment
Costco chairman: The Kirkland Signature golf ball will be back
If you didn’t get a chance to jump on the Costco Kirkland Signature golf ball bandwagon before the train left the station (to mix metaphors), don’t worry.
Per SeattlePi.com, Costco co-founder and chairman of the board Jeffrey Brotman dropped the site a line in response to the grim news, which we also covered at the end of December: the balls were sold out.
The Kirkland Signature four-piece cupboard was bare for weeks ahead of Christmas, only to be restocked online December 20 and sell out again within a half hour, with eager golfers crashing the site in the process. Until now, it had been assumed Costco would contract South Korean manufacturer Nassau Golf for another cargo ship full, but no official word had been received.
Consider this the official word. According to the Seattle Post-Intelligencer, Brotman wrote an email saying in part, “the golf balls will return.”
Of course, we’d like to have a more specific idea of when they’ll line the discount warehouse’s shelves, but we take solace in the fact they’ll be back.
The $30-for-two-dozen four-piece urethane balls caused quite a stir in the golf equipment community last year. Our Andrew Tursky rounded up some of the considerable enthusiasm from the forums in this piece.
Equipment
Putters that never made it: Check out some of the best tour builds that didn’t make the cut
Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.
So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)
Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.
Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.
Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.
Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.
Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.
Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX
3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X
7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X
Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype
Ball: Titleist Pro V1x
Grips: Golf Pride MCC
In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:
“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.
Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”
And our members have been naming their favorites and why in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
- ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”
Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Aaron Rai’s winning WITB: 2026 PGA Championship
Nelly Korda WITB 2026 (April)
Justin Rose on the switch to McLaren Golf, learnings from previous equipment moves
Photos from the 2026 PGA Championship
Patrick Reed WITB 2026 (May)
Driver: Titleist GT3 (9 degrees) Buy here. Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX 3-wood: TaylorMade Qi35 (15 degrees)...
Aaron Rai’s winning WITB: 2026 PGA Championship
Driver: TaylorMade M6 (9 degrees) Shaft: Aldilda Synergy Blue 70 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Blue...
Michael Block WITB 2026 (May)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Black VeloCore+ 5 X 3-wood: TaylorMade Qi4D (15 degrees @14.25) Shaft: Mitsubishi...
Bryson DeChambeau WITB 2026 (May)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X Prototype 3-wood: Krank Formula Fire (10 degrees) Shaft: LA Golf BAD...
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks ago
Aaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment2 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
-
News2 weeks agoWITB Time Machine: Phil Mickelson’s winning WITB, 2021 PGA Championship
-
Equipment2 weeks agoWhich of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
-
Equipment2 weeks agoLead Tape Report: Adjusting the swingweight of the Wanamaker Trophy
Turk20
Apr 4, 2017 at 6:52 am
Both Taylor made and maxfli had golf balls in their mid range price that were better than their top lines both ‘sold out’ and came back as inferior balls. We will see what happens but I will not buy more than minimum to check them out first. COSTCO really screwed up on golf gloves when they dropped the leather ones and now only have the synthetic. After years of buying them would not go near current product.
stan markowski
Mar 12, 2017 at 9:03 pm
I like Costco they are a good company,their quality is also very good I am waiting for their golf balls I”ll take mine in yellow please…stan
JT Reese
Feb 12, 2017 at 1:19 pm
Bottom line is this. As a consumer paying $45-50 a dozen for a pro-line ball is insane! The MG (Master Grip) also has close specs to the PRO-V, for $19.99 per doz. Like anything else you pay for the name. It’s time there is some competition that may drive the prices down. Personally, I play the Prov, only because I have a contact who is a ball hunter guru! No water balls. So $20 a dozen for mint, this is what I do. Ain’t paying their price!
Ivor Robson
Feb 3, 2017 at 7:58 pm
Can’t wait to buy the k sigs at the wembly stadium location
Deadeye
Jan 31, 2017 at 6:32 pm
I just changed from Prov1 to Callaway super hot 55. Great feel, at least ten yards longer and available at Costco for fifteen dollars a dozen. Not as much spin around the green but flies straighter and holds greens. Nice soft feel on all clubs. So, bring back the four piece ball if you want but I am staying with my new best ball.
DTrump
Jan 31, 2017 at 4:03 pm
The Kirkland Signature ball is a great ball, which was made to fire the first shot towards the big boys. This ball is the official ball of Kim Jong Un and it says right on the box, guaranteed 2 Hole In Ones per dozen purchased. This ball will bring the Koreas together once again.
I will not play this ball, because it doesnt say Titleist.
DJT
Jan 30, 2017 at 2:51 am
For far too long South Korean ball companies have been killing U.S jobs and destroying our domestic golf ball industry. My administration will be taxing these balls %200 to level the playing field with the U.S made ProV1 (which is fabulous ball, amazing really.) This undercutting stops NOW. My team is also considering ban on foreign players so all PGA events are won by U.S PLAYERS ONLY. #fakeballs #muricafirst #MPGAGA
Rick
Jan 30, 2017 at 4:07 am
When I read stuff like that all I hear is this:
https://www.youtube.com/watch?v=9zbjGUmI4Js
Rick
Jan 30, 2017 at 4:14 am
Obviously the English version haha, or as you would probably rather say the “murican version.
https://www.youtube.com/watch?v=FyrNktD_PwA
DC1
Jan 31, 2017 at 2:21 pm
Hilarious! First Trump related laugh I have had since the election!
Golfer
Aug 20, 2020 at 2:45 am
Hate to break it to you, but the ProV1 is not made in the US anymore
Randel
Jan 29, 2017 at 8:36 pm
Very simple, how many new Costco Members will be plunking down $50 or more for a membership so they can buy Kirkland balls? Once in the store do you think a $30 dollar purchase is all that they will buy? Costco now knows these balls will bring in more customers and any item that is a sure fire draw will of course be a priority for them….
Grizz01
Jan 31, 2017 at 7:21 pm
I love the free market!
BooBunkie
Jan 29, 2017 at 5:28 am
Ooooh Peter’s Dad is on line 1! The duuuuuude!!!
Jim
Jan 29, 2017 at 12:51 am
I would imagine there are plenty of ball manufactures in China, South Korea and even Taiwan that can make a ball very much like or exactly the same as Costco sold as Kirkland..and they would be very happy to sell a few million to Costco any day of the week. If you had the rights to a ball Costco would buy a couple million of what would you do? Callaway, Taylormade, Titliest all make most of their high end balls in the U.S. with a small portion and cheaper models coming in from over seas. There has to be some manufactures that have room for others, I did some searching and found 2 companies in China that were offering a 3 piece urethane ball with any name you wanted printed on it in lots of 10,000 or more…about .55 cents each????
The dude
Jan 29, 2017 at 7:36 pm
Nice research!!
Golfer
Aug 20, 2020 at 2:47 am
This is actually incorrect, all of the premium balls you listed are currently being made overseas either entirely, or only the urethane cover is made in the US. Check the side of the box…
TonyK
Jan 28, 2017 at 11:13 pm
If Kirkland Signature balls come back, it won’t be the same ball by Nassau Korea. According to a Korean golf forum, currently Nassau Korea are not making the KS balls any more and they do not have a plan to make them in the near future.
Sean
Jan 30, 2017 at 3:19 pm
Source?
BooBunkie
Jan 28, 2017 at 4:13 pm
These my friend are Pro V’s with masquerade masks on. Think Phantom Of The Opera.
The dude
Jan 28, 2017 at 5:26 pm
Not even Close….
– Wally Uilhein
Obee
Jan 30, 2017 at 10:57 am
The spin data seems far different on full wedge shots. At least the data I saw.
David Montgomery
Jan 28, 2017 at 3:17 pm
Is it true that Costco bought a bunch of unwanted balls from TayloreMade for really cheap and they just re-branded them with their logo? That would explain why people love the feel and especially the price.
Joseph
Jan 28, 2017 at 7:16 pm
Costco buys a lot of overruns, closeouts and gray market product intended for other markets, not the US Costco may sell golf balls called Kirtland, but you can be certain that it will not be the same ball from the same factory’s that was sold last year. Why? Because whoever those balls were actually made for will cut off the factory if they ever dump product to Costco again. If Costco was selling them for $14 a dozen, that factory wasn’t making much on the deal anyway, just getting rid of excess inventory.
Jack
Jan 29, 2017 at 6:33 am
Really.. interesting as I thought Costco mostly buys stuff in bulk and brands create specific products to work in their stores. Kirkland products are specifically designed for Costco as that’s their store brand. I highly doubt they went into this only thinking short term. Kirkland products don’t change that often. Golf balls though might since they probably never imagined people paying so much attention to them. If the current supplier changes their mind, I’m sure there are other suppliers willing to do the same if they have the excess capacity. Which I think is what happened. The current supplier ran out of capacity and Costco couldn’t find another one soon enough to produce an identical product.
DC1
Jan 31, 2017 at 2:24 pm
Bingo. Don’t sell costco short, they are a very smart retailer who takes the long view. If they say they are coming back, they are coming back. They know the balls are really good, they won’t come back with an inferior product. That’s not how they work.
Golfgirlrobin
Jan 29, 2017 at 5:57 pm
All Kirkland branded product is designed and made specifically for Costco. They’re not cheaper because they’re overruns or rebranded, Kirkland is cheaper because there are virtually no marketing costs and they control the entire production chain.
Tazz2293
Jan 30, 2017 at 7:20 am
The Costco Golf R&D Department is really pumping out golf ball innovation as we speak.
Lance
Jan 28, 2017 at 12:20 pm
Why not link to the source?
toad37
Jan 28, 2017 at 3:14 pm
http://www.seattlepi.com/local/article/Costco-says-golf-balls-will-return-10883759.php