Equipment

Custom Fitting in the UK – Chilli Dip Golf

Published

18 years ago

Aug 28, 2008

Bad off the tee – buy a new driver. Not peppering the pin with your short game – buy a new wedge with max-size grooves and the deepest face milling available. We focus so much of our attention on buying new equipment that we seem to forget the two other areas of game improvement. The first one is obvious: getting lessons from a great instructor. The second one, making sure the the equipment we play is right for us, is often ignored.

Getting instruction is an art. You need to find an instructor with whom you connect, one with a deep understanding of the golf swing that can tell you not just what you need to do but also deliver the damning verdict on your swing in such a way that you want to take apart your pitiful excuse for a swing, shred what dignity you have and create a newer improved you. In comparison to that, getting fit for equipment such be a cinch right? If that were true, then why do some experts estimate that a vast majority of golfers are playing ill-fitting equipment?

Partly it is that in the fast moving world of golf technology, it takes some serious dedication to keep abreast of the latest improvements but also that until recently, getting equipment customised beyond regular, stiff and extra-stiff shaft flex was only available to those with access to Tour vans. I say until recently as in the last few years, more and more golfers are learning of the undoubted benefits of correctly fitting equipment and answering the demands of these golfers are places like Chilli Dip Golf in Camberley. Bag Chatter went down there to see what exactly happens at a performance centre like this and how close it comes to the mythical Tour van experience.

Set in the grounds of Camberley Heath golf course, one of the legendary Harry Colt’s courses, Chilli Dip describes itself as a performance centre that ‘offers a truly bespoke custom fitting, club building and repair service usually only reserved for Tour Players’. These sorts of places are normally associated with the US market rather than the European so it is a rare treat for British golfers to be able to access this level of expertise.

The custom fitting process is broken up into four separate areas:

Consultation and Current Set Analysis. This consisted of the fully accredited club fitter watching my swing and then taking away my clubs for a full check of shaft length, shaft flex, swing-weight, loft & lie. It was quite eye opening to actually see the variations in flex, frequency and swing weight in my fairly recent set of big OEM irons and also how the regular pounding of golf balls on both the course and the range had created discrepancies in the lofts and even in the lies. Once this was all done we then chatted about what my handicap was (laughably high), where my game was going (into a death spiral) and what I felt about my current set and what I was looking for in a new set (I suppose a miracle swing cure is out of the question?).

Full ball flight analysis. This was the full treatment, similar to anything that a touring professional would get short of a visit to the manufacturers themselves. A TrackMan launch monitor measures a mind boggling number of different swing metrics. Obviously the basics like swing speed and ball speed are there but then there are the physical markers of carry, total distance, back-spin, side-spin, dispersion as well as angle of attack (both vertical and horizontal), face angle at impact and about a dozen more besides. Hell, for all I know the damn thing knows how much change I have in my pockets! To say that it gives you a complete picture of your swing is an understatement as the true horror of my swing is shown on the huge screen and you really understand why something like this is so useful for those lucky and talented enough to have a repeatable swing.

Small but perfectly formed, the business end of a TrackMan system

With the ability to objectively examine the quality of the strike you can put on the ball, the process of trying different equipment is transformed. Any changes in stiffness, length, shaft type or anything else, you are able to know just how well a club suits you. So homing in on the setup that performs best for your swing and maximizes your distance and accuracy is no longer a hit and miss affair but a real scientific process. Ben, the club fitter who looked after me, instantly picked up an issue with my current setup and guessed that my bad shots were pull-hooks and blocks before I had even hit a ball. A series of test strikes showed that he was spot on and trying the setup that he suggested instantly improved my dispersion as well as adding some unexpected extra distance. The TrackMan data clearly showed this and a change of shafts soon had my spin down closer to optimum levels.

Of course deciding your setup is only the initial part of the process, next comes the building. This really is the icing on the cake where your chosen top performing setup is converted into a superlative custom-built set. Precise head-weights and swing-weights, shaft spines, frequency analysis, personalised grinds, all of the above are available to you to put those finishing touches on your set.

The Workshop, where all the serious work is done

Putter fitting: The one club that in Chilli Dip’s opinion that is too often over looked in custom fitting. You can demo a range of top quality putters on an indoor putting green under the eye of an experienced professional with the end result being a putter that is perfectly customised to your stroke.

Ball fitting: Again, once you have you perfect set up you can even take the opportunity to optimise the ball you play.

Tour equipment has always had a mystique and most likely always will but in the vast majority of cases (one offs and prototypes aside) the reality is that these pieces are just regular equipment has been hand-picked and then tweaked and tuned to match their (admitted perfect) swings. Fitting and performance centres like Chilli Dip bring that extra level of optimisation to the masses for either new or old equipment and are becoming a must for any serious golfer looking for a real advantage. That I’ve shot my best rounds with my new custom fitted clubs may or may not be a coincidence but the confidence I have standing over the ball is directly a result of knowing that my clubs are the ones for me.

For more information, visit www.chillidipgolf.co.uk

Equipment

Why Rickie Fowler is switching to a shorter driver at the PGA Championship

Published

4 days ago

May 13, 2026

Alistair Cameron

In a golf world where players are looking to eke out every yard possible, usually by lengthening their drivers to add clubhead speed, there’s one player at the PGA Championship who’s going in the opposite direction. In fact, for Rickie Fowler, his goal off the tee is not about gaining extra distance or yards north to south, but rather about shrinking the misses from east to west.

Ahead of the PGA Championship and the week prior at the Truist Championship. Fowler mentioned to Cobra Tour Rep Ben Schomin that the driver didn’t quite swing feel the same as everything in the bag. As a result, and with Schomin’s suggestion to try and sync everything up with the big stick, Fowler decided to test out a shorter length shaft.

“He’s been at 45 (inches), and he’d been at 45 for a few weeks, 44 1/8 (inches) is really is where he is been living really for the most part, for the last couple of years, and is where he is been comfortable,” Schomin told GolfWRX. “It just felt like it was a little long and loose on him.”

Interestingly, Fowler ranks 40th in Driving Accuracy this year on the PGA Tour. It’s his most accurate season with the driver since the start of the decade. But sometimes for players, feel is more important than statistics.

“It was really more of a trying to get the swing to feel the fluidness from club to club to club to try to get it to feel the same,” Schomin added. “And so we took it down to 43 and a quarter, and it was a touch of a ball speed loss, just based on that overall club head speed. But honestly, he squared it up probably a little better. The right miss wasn’t nearly as far. So really, overall down-range dispersion tightened up a fair amount, and he felt confident in swinging it.”

The change in length had Fowler’s caddie, Ricky Romano, beaming at how well he had driven during Tuesday’s practice round at Aronimink. So much so, he was asking Schomin not to suggest changes anymore.

Fowler’s shaft-shortening is one of a few driver adjustments he’s made this season, and to Schomin’s credit, it’s thanks to the fact that he and the rest of the Cobra team had Fowler fit very well into three of the four heads in the Cobra OPTM lineup.

“He had three distinct drivers and the biggest decision was trying to decide which worked best at that time,” Schomin told GolfWRX previously. “He’s played the majority of the season with OPTM X, but has also played a couple of tournaments with OPTM LS. His overall driving stats have been good.”

At the RBC Heritage earlier this spring, Fowler switched drivers, changing from his Cobra OPTM X and into the Tour, low-loft Max K model that Gary Woodland used to win just a few weeks prior.

Now for the PGA Championship, Fowler’s back in the X head, but still using the UST Mamiya LIN-Q PowerCore White 6TX shaft, just a little bit shorter.

“Will he stay there? I’m not sure,” Schomin added. “Could we end up say at like 43 and 7.5 (of an inch). If it’s giving him the same feel of consistency through the bag, then I think we might end up just a touch longer. But if he likes where he is at, he’s confident where he is at, that’s really all that matters.”

If there’s more testing, though, just don’t tell his caddie.

Equipment

GolfWRX Launch Report: 2026 Titleist GTS drivers

Published

4 days ago

May 13, 2026

GolfWRX Staff

What you need to know: As is customary for the Fairhaven-based company, Titleist officially announced today that its GTS drivers are headed to retail, following a successful tour release. The GTS2, GTS3, and GTS4 drivers will be available in golf shops June 11.

Since debuting at the Texas Children’s Houston Open, the new GTS lineup has quickly gained traction on the PGA Tour, with more than 50 players already making the switch to a GTS2, GTS3, or GTS4 driver. Among them are Justin Thomas and Jordan Spieth.

Justin Thomas’ Titleist GTS2 driver (Greg Moore, GolfWRX)

According to Titleist, the GTS series builds upon the performance foundation established by the GT Series, while introducing several major technological advancements, including a new Split Mass Frame construction, refined aerodynamics, and an updated Speed Sync face design.

2026 Titleist GTS drivers: What’s new, key technology

Split Mass Frame and thermoform body

At the center of the new GTS lineup is a redesigned internal structure: the Split Mass Frame. This technology works with a full-thermoform body made from Titleist’s Proprietary Matrix Polymer (PMP), a lightweight composite that enables engineers to reposition mass more efficiently throughout the head. Compared to the previous GT generation, GTS drivers feature nearly double the PMP material, increasing from 13 grams to 26 grams, while maintaining the sound and feel preferred by better players.

The weight savings from the thermoform construction allowed Titleist engineers to strategically separate mass placement inside the head. Specifically, more weight is pushed rearward to improve stability and forgiveness, while additional mass is positioned low and forward to optimize speed, launch, and spin.

In short, golfers are able to maintain ball speed and consistency across both centered and off-center strikes.

Faster aerodynamics

Titleist also refined the aerodynamic shaping of the GTS heads to help players generate more clubhead speed.

The tails of the new GTS2 and GTS3 heads have been raised compared to previous models, helping airflow stay attached to the crown and sole longer during the swing. According to Titleist, the improved airflow reduces drag and increases speed without affecting launch conditions or center of gravity placement.

Typically, aerodynamic gains can compromise forgiveness or launch characteristics, but the weight savings from the Split Mass Frame allowed engineers to preserve preferred CG locations.

New Speed Sync face

The new Speed Sync Face design is engineered to improve ball speed retention across a larger portion of the face. A reinforced perimeter structure helps maximize face deflection and COR on centered strikes, while the upper portion of the support ring is opened up to increase speed on high-face impacts, a common strike location for many golfers. The face also features a variable thickness design to preserve speed and performance across a wider impact area.

Expanded adjustability

Each GTS model includes a dual-weighting system to fine-tune launch, spin, and shot shape more precisely than previous generations. GTS2 uses interchangeable forward and aft weights, while GTS3 and GTS4 combine a rear weight with an adjustable forward track weight system.

Tour-inspired face graphics

The new lineup features redesigned high-contrast face graphics to improve alignment and framing at address, according to Titleist. Sharp visual lines are designed to make it easier to center the golf ball and to perceive loft more easily at setup.

Additional model details

GTS2

The GTS2 is the most forgiving model, designed for golfers seeking maximum stability and consistent speed across the face.
It produces high launch with mid spin and features a larger, confidence-inspiring profile behind the ball.
Standard weighting includes an 11-gram forward weight and a 5-gram rear weight, with additional fitting configurations available.

GTS3

The GTS3 is aimed at players who want more control over launch, spin, and shot shaping.
Compared to GTS2, the GTS3 offers lower launch and spin while featuring a more compact profile and deeper face design preferred by many stronger players.
The head features an adjustable forward-track weight system to further fine-tune center of gravity placement.

GTS4

The lowest-spinning option in the lineup, GTS4 is built for golfers looking to reduce excessive spin and maximize total distance.
Unlike previous “4” models from Titleist, the new GTS4 features a full 460cc profile that improves forgiveness and stability while retaining its low-spin DNA.
Like GTS3, it includes a forward track weighting system for precise fitting adjustments.

What Titleist says

“When we talk about driver design, it’s never about the one feature or benefit — it’s about all of them,” said Stephanie Luttrell, Titleist’s Senior Director of Metalwood R&D. “Ball speed, forgiveness, spin stability, adjustability, exceptional sound and feel… these are all attributes that golfers care about. It’s our job to design a lineup that elevates performance across the board without sacrificing in key areas, and we feel we’ve done that with GTS.”

“We know that forward CGs drive speed with great launch and spin characteristics, but you need to be able to do that with an inertial stability that still preserves ball speed, launch and spin consistency on off-center hits,” Luttrell said. “We’ve never before been able to hit these CG positions and inertia properties at the same time, and we’re achieving that because of GTS’ construction.”

Club Junkie’s take

I feel like every time there is a new Titleist wood release, I figure they can’t outdo their previous driver. And every year, I am wrong and impressed with the performance. The GTS fits right into that narrative again, as I didn’t know where Titleist could go from GT, but they pushed the limits again, and my fitting proved the smart people there found ways to improve.

My past four Titleist drivers have been a 2 series as my swing typically requires a little height, spin, and forgiveness so I figured I would just get a new GTS2 and be on my way. During the fitting, I was impressed by the new GTS construction, its added PMP material, and the advanced adjustability on each model. My fitter, Joey, got to work putting together a GTS2 and we started there. The launch and spin were great, and the consistency on misses was very tight. My average ball speed with the GTS went up a little bit as the new Speed Sync face creates more speed away from the center.

Joey then built up a GTS3 in 11 degrees, but I figured this wouldn’t have the stability I needed for tight dispersion on my miss hits. That thought was quickly erased after a few shots, and I really liked the more center start line and reduced draw on the misses I was seeing. We tried a few different settings and shafts to dial in the details in order to get the best fit. Having a forward and rear weight in the head allowed Joey to set up the GTS3 with a heavier rear weight to keep the launch and spin up, while the Sure Fit hosel set flat created a more center start line for me. My misses were not nearly as far left, and I was really impressed with the consistency on the spin and launch when I didn’t hit it in the center.

Titleist again created a wood line in GTS that delivers improvements over previous drivers while keeping the traditional look and feel you expect. More adjustability, better off-center speed, and 3 drivers that are playable over a wider range of players should make these extremely successful in fittings.

Pricing, specs, availability

GTS2 lofts: 8, 9, 10, 11 degrees (RH/LH)

GTS3 lofts: 8, 9, 10, 11 degrees (RH/LH)

GTS4 lofts: 8, 9, 10 (RH/LH)

Featured shafts

Project X Titan Black
Mitsubishi Tensei 1K White
Mitsubishi Tensei 1K Blue
Mitsubishi Tensei 1K Red

Premium shafts

Graphite Design Tour AD DI
Graphite Design Tour AD VF
Graphite Design Tour AD FI

Available for fittings and pre-sale now.

In golf shops worldwide beginning June 11.

Price: $699 (standard), $899 (premium)

Equipment

Titleist launches new GTS2 and GTS3 fairways

Published

4 days ago

May 13, 2026

Gianni Magliocco

Titleist has today introduced its new GTS2 and GTS3 fairways.

Lower and deeper center of gravity (CG) positions, new adjustable heel-toe weights and advanced clubface innovations drive total performance in the two tour-proven models.

New GTS fairway technology:

Wraparound composite crowns: Unlock lower CG positions for higher launch and lower spin as well as more CG depth for added forgiveness.

Refined shapes and profiles: With two distinct setups, with GTS2 featuring a shallower face height and larger address profile compared to GTS3’s deeper face and more compact profile. Both models feature flatter sole designs for better performance off the turf.

Dual-weighting systems: The dual-weighting systems allows for personalized performance, with interchangeable heel-toe flat weights helping to fine-tune CG location across the face.

A forged L-Cup face design: The new face design is optimized for GTS and works to preserve ball speed, maintain launch conditions and enhance sound and feel on low-face impacts.

Tour-inspired polished clubfaces: To help players see more of the clubface at address.

GTS2 Fairway

The new GTS2 fairway is designed with a shallower face and a larger profile than GTS3, ideal for players with more sweeping deliveries with their fairway metals.

GTS2’s new face height, inspired by tour feedback, was designed shallower than the prior generation GT2 model and more in line with the GT1 fairway. Each loft in GTS2 leverages a shallower profile except for the 13.5-degree, which maintains a slightly taller face.

With its new dual-weighting system, the ‘2’ model now has heel-toe CG adjustability.

Lofts: 13.5, 15.0, 16.5, 18.0, 21.0

Dual-weight system: 11-gram weight in heel, 5-gram weight in toe (standard)

GTS3 Fairway

The new GTS3 fairway is designed with a deeper face and a more compact profile, ideal for players who hit down on the golf ball more with their fairway metals.

New to the GTS3 family is a 21-degree offering, giving players two distinct profiles in Titleist’s 7-wood loft.

Instead of the track weight system featured in prior generation ‘3’ models, GTS3 now benefits from adjustable heel-toe flat weights.

Lofts: 15.0, 16.5, 18.0, 21.0

Dual-weight system: 11-gram weight in heel, 5-gram weight in toe (standard)

Price & Availability

The new GTS fairways are available for fittings and pre-sale now and will be in golf shops worldwide beginning June 11 priced at $399 (standard) and $599 (premium).