Equipment

Miura Launches ICL-601 Driving Irons in North America

Published

9 years ago

Sep 26, 2017

Looking for a long-iron replacement that’s easier to hit than the MG Collection CB-2008, CB-1008, and MB-5005 irons? Meet Miura’s new MG ICL-601 driving iron, which will be available later this fall in North America.

The ICL-601 has a multi-material, hollow-cavity construction that helps it launch shots higher and faster than the company’s MB and CB models. The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.

“The inner cavity design is not new for Miura,” says Hoyt McGarity, President of Miura Golf. “It was first introduced with the hugely popular IC-2003. Modern technological advances have allowed us to improve on the original design. This is accomplished by integrating a 455 Carpenter Steel face (as found in our PP-9005 G) and the use of the variable weighting system found in the Hayate woods.”

The ICL-601s also include a weight-port in the sole of the club head that allows club fitters to fine-tune swing weight for different lengths, and to help golfers blend the driving irons with their standard iron sets. The driving irons have a satin chrome finish, along with a thick top line that hides the wider sole from a golfer’s view at address.

“The ICL gives Miura traditionalists the opportunity to add technology to their game, while maintaining the quality and feel of a Miura forged club,” says Jason Rutkoski, Miura Golf vice president. “The ICL is a remarkable new product that will benefit golfers from all demographics, by seamlessly fitting their existing set or adding a club to fit that one shot/hole per round.”

Golfers can purchase the ICL-601 driving irons in three different lofts: 18 (2-iron), 20 (3-iron), and 23 degrees (4-iron). They will be available through Miura’s network of custom fitters for $369 each.

Related Topics:irons Miura

Up Next

Spotted: Callaway Mack Daddy 4 prototype wedges, X Forged driving iron

Don't Miss

In-Depth Reviews of TaylorMade’s P790 irons from Six GolfWRX Members

GolfWRX Staff

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

18 Comments

uglande

Nov 20, 2018 at 11:11 pm

Looks atrocious. Anyone needing that much offset should go straight to the fairway wood aisle. And what’s with the ridiculous marketing message on the club head? Miura puts so much care into the materials they use, and they are known for their relatively simple designs. Why wreck it with all of this cluttering text? It makes the club look cheap and homemade.

Reply Report comment
Miuralovechild

Oct 30, 2017 at 9:25 pm

I’ll be needing to try this.

Reply Report comment
Sloop

Oct 7, 2017 at 7:27 am

I tried this bad boy out and it felt how I hoped the TMB would. It’s going to eat at me until I get one. One thing I am going to look at is if it can be bent. I’d like to get a 20 and bend it a degree or two weak and lose a little offset.

Reply Report comment
Dat

Sep 27, 2017 at 9:32 am

“The structure of inner cavity” um, that doesn’t sound right.

Reply Report comment
toyzrx

Sep 26, 2017 at 11:47 pm

Miura isn’t the same any longer. Logos are getting bigger on heads though. I liked their stuff when they used to do OEM for big companies.

Reply Report comment
Daniel

Sep 26, 2017 at 6:51 pm

Its not even forged?

Reply Report comment
- Tom1
  
  Sep 26, 2017 at 8:30 pm
  
  http://www.vcstar.com/story/sports/2017/09/26/golf-gear-miura-golfs-icl-601-driving-iron/705486001/ … there ya go skippy
  
  Reply Report comment
  - Daniel
    
    Sep 27, 2017 at 9:23 am
    
    It doesn’t say its forged. It compares it to other forged clubs.
    
    Reply Report comment
    - 2putttom
      
      Sep 27, 2017 at 11:29 am
      
      well shoot you guys are blowin my defense outta the H2O
      
      Reply Report comment
The dude

Sep 26, 2017 at 5:00 pm

Eeeww

Reply Report comment
2putttom

Sep 26, 2017 at 3:03 pm

awww the mizzy boyz have showed up

Reply Report comment
Vanilla Gorilla

Sep 26, 2017 at 12:54 pm

I’d have expected prettier from Miura, sticking with MP-H5’s for the upper end of my bag.

Reply Report comment
- Vanilla Gorilla
  
  Sep 28, 2017 at 5:58 pm
  
  Appears to have some things in common with:
  
  [img}http://wpmediars.golfwrx.com/wp-content/uploads/2017/09/104ccac8c0929ecb6779127f4fccc694.jpg[/img]
  
  Reply Report comment
Golf Engineer

Sep 26, 2017 at 12:41 pm

“The bodies of the driving irons are made of SUS304 stainless steel, and they’re welded to a 455 carpenter steel faces — the same material that’s used to craft the hot faces of Miura’s Neo Genesis PP-9005 irons.”
Okay, the body is cast stainless steel and the face is also steel. No forged components.
Now here from the quoted article for the PP-9005 iron set we have:
“The Genesis PP-9005 irons ….. (are) comprised of two pieces; the back is forged out of S20C and the faces are 455 carpenter steel.”
So the backs and hosel are forged while the faceplate is carpenter steel not forged to the best of my knowledge.
Muira is up front with the metallurgy of their iron club heads in contrast to TM P790 co-forged heads where the faceplate is forged and body is cast steel but labelled as fully forged.

Reply Report comment
L

Sep 26, 2017 at 12:38 pm

I bet you it feels better than the PXG

Reply Report comment
Ken

Sep 26, 2017 at 12:36 pm

Hideous. The new Mizuno driving iron is 100x better looking

Reply Report comment
- MrWolf
  
  Sep 27, 2017 at 2:55 pm
  
  This. It really is hideous. The early signs following Miura’s takeover are not good.
  
  Reply Report comment
Swingman/Jerry

Sep 26, 2017 at 12:22 pm

That is ugly for a Miura – too much offset, too thick topline, the sole is fine for a hybrid type driving iron.

Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putters that never made it: Check out some of the best tour builds that didn’t make the cut

Published

2 weeks ago

May 18, 2026

Alistair Cameron

Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.

So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)

Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.

Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.

Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.

Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.

Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.

Whats in the Bag

Patrick Reed WITB 2026 (May)

Published

2 weeks ago

May 18, 2026

GolfWRX Staff

Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX

3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X

7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X

Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype

Ball: Titleist Pro V1x

Grips: Golf Pride MCC

See more photos of Patrick Reed’s clubs here.

Equipment

Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss

Published

2 weeks ago

May 18, 2026

Gianni Magliocco

In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:

“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.

Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”

And our members have been naming their favorites and why in response.

Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”

Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”