Connect with us

Equipment

Fujikura officially introduces Speeder Evolution IV shafts

Published

on

All the way back in the beginning of August at the 2017 WGC-Bridgestone Invitational, we spotted a new, “Japan” release of a Fujikura Speeder Evolution IV shaft — we were left to speculate about its materials, specs and profile, however. Today, Fujikura officially introduced the Speeder Evolution IV shafts, and we now have all of the information.

Discussion: See what GolfWRX members are saying about the Speeder Evolution IV shafts

Fujikura’s line of Speeder shafts began with the Speeder 757, and it has been one of the most popular shaft lines on Tour since the late 1990s. Before this release, there was also a Speeder Evolution I (highest launch, mid-spin), II (low-to-mid launch, low spin) and III (mid-launch, mid-spin). The new Evolution IV is most like the Evo II; it’s designed for low launch and low spin, but “has a slightly softer mid-to-tip section to increase launch angle while maintaining low torque and spin,” according to Fujikura.

SpeederEvoIV

The Evo IV shaft also uses new materials and constructions including a new high-performance intermediate modulus 70-ton material for lightweight stability, and an “Engineered Outer Bias Technology” for a smoother loading feel. Like previous Speeder Evolution shafts, the Evo IV uses Metal Composite Technology, 90 Ton Carbon Fiber and Maximum Fiber Content pre-preg.

Fujikura’s Evolution IV will be available from 56-to-77 grams (569, 661 and 757) with flexes ranging from SR up to X. They will be available for $400 (MSRP) starting on October 1, selling exclusively at JDSClubs.com, and available through Fujikura’s national charter dealer on November 1.

Discussion: See what GolfWRX members are saying about the Speeder Evolution IV shafts

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

18 Comments

18 Comments

  1. Maruman

    Oct 28, 2017 at 7:31 am

    you guys sound worse than addicts…just don’t buy if you don’t want to..i am happy they keep trying to improve..for the next buyer.

  2. Bugs

    Sep 29, 2017 at 1:13 pm

    Is everything going to be painted gold now?

  3. M Smizzliest

    Sep 28, 2017 at 6:25 pm

    LH ping adapter needed!

  4. Teaj

    Sep 28, 2017 at 8:51 am

    So a site that entrenches itself in the equipment world of golf should not be mentioning the release of a new version of a shaft that was vastly popular? And Heaven forbid a manufacture try to improve on a popular model using new tech and materials.

    • Da Judge

      Sep 28, 2017 at 10:50 pm

      What was wrong with the previous old models? Should they all be chucked out and replaced with the new and improved model shafts so you can finally hit the ball solidly? And what happens when they come out with another model claiming superiority over the previous model? Watcha gonna do then??

      • Teaj

        Oct 2, 2017 at 10:40 am

        I didn’t say that there was anything wrong with the new models, but as far as performance goes using new tech and new materials could improve a shafts play-ability, feel, consistency. if a company is not improving on there current line of products they wouldn’t be in business for very long.

        Also just because a company comes out with a new model doesn’t mean its going to out perform for some players, I get that but for some it can. The what was wrong with the previous model comment is an odd one because everything over they years have had new renditions not just in golf but cars, structures. everything evolves (pun intended) over the years why would that stop with shafts? Unless you are still hitting your driver with a TT DG S300 driver shaft that is.

  5. Mad-Mex

    Sep 28, 2017 at 12:01 am

    Why do I keep coming back ?!?!?!? this is like a woman’s magazine!! full of adds !!!!

    • OV

      Sep 28, 2017 at 1:12 am

      “adds”? …. or, “ads”? …. big difference….!!!

    • C

      Sep 28, 2017 at 7:48 am

      Only you know the answer to that question. And if you aren’t talking about the information about upcoming products, why not use things like NoScript and uBlock Origin?

      • Doobie

        Sep 28, 2017 at 7:10 pm

        upcoming…. upcoming…. upcoming …. …. when will it stop!!!!!

  6. AD

    Sep 27, 2017 at 9:02 pm

    Another repaint job huh

    • BB

      Sep 27, 2017 at 9:07 pm

      How can you say that when the GolfWRX staff mimics Fujikura with this information?:
      “The Evo IV shaft also uses new materials and constructions including a new high-performance intermediate modulus 70-ton material for lightweight stability, and an “Engineered Outer Bias Technology” for a smoother loading feel. Like previous Speeder Evolution shafts, the Evo IV uses Metal Composite Technology, 90 Ton Carbon Fiber and Maximum Fiber Content pre-preg.”
      It’s just gotta feel and play better than anything before!!!!!!

      • OV

        Sep 28, 2017 at 1:13 am

        It all makes sense to me, and my game ….. NOT!!!!!!!!

      • AD

        Sep 28, 2017 at 11:16 am

        We’re all brothers in sarcasm

        • Doobie

          Sep 28, 2017 at 7:08 pm

          Gearhead golf is a joke.. a bad joke …lol

          • Da Judge

            Sep 28, 2017 at 10:52 pm

            Now now ….. gearheads have feelings too and want to feel what their favorite pro golfer is swinging. They are only toys for boys.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

on

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game. 

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag. 

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026. 

Continue Reading

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

on

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly. 

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • manima1: “You just can’t go wrong with Srixon ZXi7.”
  • MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
  • dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Continue Reading

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

on

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo.  4-8 irons are CB’s and the 9,PW are Blades.  5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft.   Standard Length, Lie and Lofts.  These are in very good condition the shafts just don’t work for me.  Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending