Equipment
The GolfWRX Shop (Ep. 9): Re-gripping a Ping Sigma 2 Putter
Ping’s new Sigma 2 putters are length-adjustable due to a uniquely designed grip. But what happens when you re-grip the putters? Equipment expert Brian Knudson finds out in this episode of The GolfWRX Shop below.
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
BIG STU
Nov 8, 2018 at 3:23 pm
You mentioned a counter balanced grip. I would have been curious to know what the adjustable mechanism weighed or if you could get it off to weigh it. And what was the weight difference between the Ping SS grip you took off versus the new one you put on? Far as you putting with it could you feel any difference in balance? Really I am just curious on the engineering side of things. Another question for you and not busting your chops in any way. Why do you not use air to put on grips? I think the air method would have worked on that grip too. BTW the comment will show up under my wife’s name because she has a Facebook account and I do not but this is Big Stu off of WRX asking
Joe Perez
Nov 7, 2018 at 4:15 pm
Excellent, Knuds!!! When I first saw the release of the Sigma 2s, I wondered if the grip could ever be changed at all.
Tim
Nov 7, 2018 at 3:11 pm
Nice video Knudson. I was just thinking about the regripping process of the exact putter! Is it just me or about half the comments on pretty much every single video either people complaining or acting like the safety police???
Nothing wrong with the way he cut off the grip…im sure hes done it a thousand times! He still has 10 fingers as far as i can tell! As far as it being square??? Who cares? It was a demo video. To cut a grip of by cutting away from your body you pretty much have to be standing on your head!
CGKansas1
Nov 7, 2018 at 9:33 pm
I guess it just matters on your point of view on this video – is it supposed to be educational or just entertainment? If the point of the video is to show how to change a grip and he does it unsafely and improperly then why is it here? If the purpose is for us to giggle at then good job!
Tim Armington
Jul 27, 2019 at 3:07 pm
There is nothing wrong with the way he cut off the grip. I cut off hundreds of grips per week and do it the same way he does.
Chuck Dietz
Nov 7, 2018 at 1:41 pm
What was the outside diameter of the adjustable sleeve? was it 0.580 or 0.600 inches? Or a custom size?
I have an adjustable TaylorMade Ghost putter (Actually an adjustable TM Fitting Tool putter, and the sleeve diameter is 0.680, for which I cannot find a replacement putter grip. Any sources for a replacement grip?
Techvan4Life
Nov 7, 2018 at 12:19 pm
“Perfectly vertical” without the aid of any type of level – that’s new, and once again you managed to make an easy process dangerous. It does not matter what you are working on or what you are doing, all materials must be secured properly before adjusting. The concept of basic shop safety escapes you. Please stop – these are getting worse every time.
Tommy
Nov 7, 2018 at 9:10 am
You need a plumb line drawn on the wall across from your work to at least help a little with the club face alignment. Looking at the from the side with your head cocked 90* is the worst method for squaring the grip that I’ve ever seen. This is especially important for a putter, as you know. Not a small thing or an advance detail. Also, SAVE THAT GRIP! That’s $15 on eBay!
robert horneman
Nov 7, 2018 at 8:29 am
Too bad you didn’t save the $25.00 grip.New grips are VERY easy to save.
Golf64
Nov 6, 2018 at 6:00 pm
Thanks for doing this vid.! I have had a few ppl. ask me this question of grip changes.
Golf Gear Box
Nov 6, 2018 at 3:56 pm
Thanks very helpful video. As a regripper I have not come across one of these yet so now I know what to expect! Though, when doing instructional videos please use safer razor blade technique, always slice away from you.
Rob
Nov 6, 2018 at 3:02 pm
That grip was 30* off square to the face. At least. 🙂
Russ
Nov 6, 2018 at 1:47 pm
I’ll give him credit for showing the mistakes; we are after all human.
I like the videos, is good to see how others do club work, WRX is always thinkin’.
skip
Nov 6, 2018 at 12:45 pm
what a hack.
ARTIT VIBULAKAOPUN
Nov 6, 2018 at 11:01 am
So I saw that you just slipped the grip on like normal. Did you cut a hole in the new grip to allow yourself access to the adjustable screw? Just curious.
Knudson
Nov 6, 2018 at 1:24 pm
No, I didn’t need to cut, or expand, the existing hole in the grip. I was still able to use the wrench to adjust the length with the grip as it is.