Club Building 101: How to properly fit ferrules
When it comes to ferrules, there can be some custom option limitations. If you attempt to install the wrong size, it’s easy to have them break or be damaged beyond repair during the process. This video specifically addresses installing .355″ taper ferrules onto .370″ taper shafts while maintaining a snug fit and preventing creep.
This weekend is my annual golf trip with my guys group! This is the WITB that I work towards all year as I need to play the same 14 clubs and shafts!
Driver: Titleist GT2 (11 degrees @ 10.25)
Shaft: Mitsubishi Diamana WB 63x
3-wood: Ping G440 LST (16 degrees @ 16)
Shaft: Mitsubishi Tensei AV RAW Orange 65TX
7-wood: TaylorMade Qi35 Tour (21 degrees @ 20)
Shaft: Fujikura Ventus TR Blue 8s
Utility: Titleist U505 (4)
Shaft: Graphite Design Tour AD HY85-s
Irons: Callaway Apex Ai150 (5-PW)
Shaft: True Temper Dynamic Golf Mid 115 S
Wedge: PXG Sugar Daddy III (50-10S)
Shaft: Project X Wedge 6.0
Wedge: PXG Sugar Daddy III (56-10S)
Shaft: Project X Wedge 6.0
Wedge: Titleist Vokey WedgeWorks (60-A+)
Shaft: Project X Wedge 6.0
Putter: Kevin Burns 9306 2.0 (33 inches)
Grip: Iomic Standard
Ball: Titleist ProV1x
Bag: Titleist Links Legend Member
We’re getting hands-on with something truly premium today – the brand new irons from Vega Golf! Known for their craftsmanship and forged perfection, Vega brings a blend of tradition and innovation straight from Japan. In this unboxing, we take a close-up look at the stunning details, finishes, and offer initial impressions of these sleek new sticks.
From the 3M Open, Andrew Tursky takes you behind the scenes for the top golf equipment stories on the PGA Tour this week.
Andrew G
Jan 6, 2019 at 12:59 am
Wow – reached a new low. Unsafe and not even scratching the surface on the topic of preventing creep. Time for WRX to replace the so called ‘equipment experts’ with people who actually know about the topics and have extensive experience.
Mark Doel
Jan 3, 2019 at 6:06 pm
Show us how you turn down a furrule…
john curry
Jan 2, 2019 at 12:52 pm
Get a basic 3/8ths (.375) course rat tail file. Lock the file horizontally in a vice. Run the inside of the ferrule up and down on the file.
joro
Jan 2, 2019 at 12:16 pm
Or, you can just buy some proper size ferrules. The vast amount of ferrules are 370 irons and 335 woods.. This guy is tragic.
Scheiss
Jan 2, 2019 at 11:52 am
Just use proper fitting ferrules. Instead of lopping off the skin or my fingers like this. Got it.
I like having my fingers and the skin and beautiful nails on them.
Thanks
JuannyBravo
Jan 2, 2019 at 10:44 am
Really? Not even a glove while you handle a ferrule that has a reamer bit in it?
Just use some acetone and q-tips to “ream” out the ferrule and slide it onto the shaft. 2-3 passes and a .335 ferrule is now a .370. far safer than what you just did.
Tony
Jan 1, 2019 at 11:32 pm
That might have been the most unsafe thing I’ve ever seen advocated on WRX. Reaming out the ferrule with a high speed reamer – freehand. Can’t believe you would advocate doing something like that without protection. There was absolutely nothing between you and the drill bit. I ream out ferrules all the time, but you’ve got to protect your hands and fingers. One little slip off the ferrule and you could severely damage your fingers. Do what you like off camera, but some dolt is going to watch this, try it and end up missing his skin.
stan
Dec 31, 2018 at 3:22 pm
Just what I always wanted to know… happy new year, ferrule fitters
2putttom
Jan 1, 2019 at 4:31 pm
and happy new year to you