Equipment
Patrick Reed’s irons and playing golf club detective
As golf writers with a specialty in golf club technology and an understanding of how the industry and supply chains work, it’s usually not overly difficult for us to draw some conclusions as to where particular clubs might come from. The reason being that as far as top-end quality components go, there are only so many places that have the capability to produce them—especially when it comes to creating thin cast/forged titanium woods or forged irons.
When a new club shows up, this puts us in the position of reading between the lines, closely comparing pictures, club designs, and even fonts, in an attempt to connect the dots.
One of the first examples of this in 2019 was Francesco Molinari’s custom Callaway irons—obviously different from the standard Apex MB model. Francesco even divulged some information about their Japanese roots in an interview with Golf.com’s Jonathan Wall “These [Apex MB] forged blades are made, I think, in Japan, so they’re slightly different from the standard muscle back.” I took a deep dive on these in a piece that can be found here.
OEM Oversight
Don’t think for a second it’s only equipment junkies on the outside doing research to learn more about their favorite clubs or trying to track down prototype information—OEMs and equipment manufacturers do it too; they even have teams dedicated to the task.
One of the best examples of this is a group of engineers located in Titleist HQ in Fairhaven Massachusetts. Their primary role is to monitor their supply chain, but the other key part of their role is to keep up to date on what other overseas manufacturers are doing with their balls, including the “white label” balls being sold under various brands—a hot topic that has been discussed many times over. The reason this is key for Titleist/Acushnet is they are both designers and patent holders when it comes to golf ball IP (intellectual property), and Acushnet also owns its manufacturing, something only the largest companies can afford to do.
The “Patrick Reed Signature” Irons
Photo By: Royce Thompson (PGA Tour)
This brings us to Patrick Reed’s new “signature” irons, spotted earlier this week at the Hero World Challenge in the Bahamas. Patrick has been quiet on the subject beyond a few details including that he’s been working on them for over a year with a small Japanese company, and we would be hearing more at the beginning of January. First reported by PGA Tour’s Andrew Tursky, thanks to some digging on the USGA Conforming List, the irons are Manufactured by Emery JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co. online and came back mostly empty-handed until I had an idea. The USGA isn’t the only governing body to have conforming lists so I went to the R&A, and BINGO!
A quick search for Emery resulted in them being the parent company for a number of quality component OEMs including GrindWorks.jp , SAQRA , and Patrick Reed.
Just like with golf balls, phones or computers, smaller companies don’t own their manufacturing and instead rely on creating a design to then be built by a much large facility. With phones, that means Foxconn, with golf balls that means a few large companies in Taiwan and China, and for forged irons, that generally leads to Endo—one of the largest forging companies in the world—they even have they own in house brand, Epon. Considering that GrindWorks irons are known to be forged at Endo, I would be happy to draw a straight line to the Patrick Reed irons also being forged there too.
Until we have further details this is still speculation, but to see what other are saying in the GolfWRX forums check out the discussion here: GolfWRX Forums: Patrick Reed with new Irons
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
Gary Woodland’s winning WITB: 2026 Texas Children’s Houston Open
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
Pingback: TOUR REPORT: John Daly’s bizarre irons, Tiger’s surprising equipment changes – GolfWRX
john
Dec 24, 2019 at 7:36 am
Like the man himself, they should probably be a lot chunkier.
jgpl001
Dec 16, 2019 at 4:10 pm
These look a little cheap and 1970’s to me
No drooling here..
Randy Copeland
Dec 12, 2019 at 7:43 pm
Muira’s made for Nike with Far Par stamped on them for sure no doubt.
lance
Dec 10, 2019 at 2:13 pm
Shovel back > muscle back
Tyler Durden
Dec 9, 2019 at 12:48 pm
This iron is specially ground in the back to make scooping sand or other impediments easier to sweep away
Caroline
Dec 7, 2019 at 8:44 pm
all the big OEM golf companies are in the business to make money and many to satisfy stock holders…it is very simple you make the best equipment you can with the highest margin you can. And when you sit down with that pencil to figure out how to make a good margin finding someone to make your product is always a consideration…
ewfnick
Dec 7, 2019 at 4:50 am
Wondered what the fuss was about and just seen what he did, nothing worse than a cheat, if he was playing in any of the groups I play with he would have caught a smack in the gob
Elvis Pwessley
Dec 7, 2019 at 12:34 am
Awww….my whittle comment got deweated!
Pricilla Presley
Dec 7, 2019 at 12:19 am
Uh oh, can he be the new douche Kooch replacement? I never liked his rolled shoulders and that smug look on his mug or that silly skip step as he pulls his ball out of the cup. Just an all around douche!
Dyson Bochambeau
Dec 6, 2019 at 8:51 pm
I hear his clubs give you improved lies
Brandon
Dec 6, 2019 at 7:36 pm
Fake news. Patrick Reed forged these himself using nothing but the finest American carbon steel and good old fashioned determination. He just had to move a little sand first in his backyard foundry so he could swing his sledge hammer better.
Clint
Dec 6, 2019 at 4:43 pm
These look like they have just enough sole to push some sand away from your ball in the bunker.
Rory
Dec 6, 2019 at 7:08 pm
No such thing as bad publicity, but I’m betting that’s not the first close up they wanted…..
Hdtvman
Dec 6, 2019 at 2:49 pm
Nice work, Lt. Columbia. What I like about Reed, like Tiger, he’s there to win, not chasing the money from major manufacturer’s. I’m sure he could name his price with any of them, but he plays what he likes and what works best for him.
jr
Dec 26, 2019 at 5:50 pm
Or maybe no sponsor wants him.
Hoganben
Dec 6, 2019 at 1:59 pm
Almost all forged irons look the same so may as well have one or two companies make them and they all look the same because one or two companies make them. Ps….I could design Tiger’s new irons…his irons are always the same with just a different brand name on them!!
Geoffrey Holland
Dec 6, 2019 at 1:48 pm
The loost art of proofreading strikes again.
“the irons are Manufactured by Emory JPN Co.
Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co.”
Paul
Dec 6, 2019 at 2:27 pm
Who cares, get a life.
Jethro
Dec 6, 2019 at 3:28 pm
Your name is misspelled. It should be Jeffrey. Lol!
Waka waka
Dec 6, 2019 at 4:26 pm
Preach!!!!
Geoffery The Girraffe
Dec 6, 2019 at 4:21 pm
ironic typo in his own comment then!
Rory
Dec 6, 2019 at 7:06 pm
I think he has looooost his mind
Tim
Dec 7, 2019 at 8:18 am
Loost..Proof..???
Gary
Dec 6, 2019 at 11:51 am
As soon as I saw them I thought Epon. The shape and finishing just looks like what I’m used to seeing from Epon.
Also if you connect the dots you’ll probably find that Endo forges the blanks that Artisan uses. That’s probably where the connection started.