Equipment
Don’t get AMP’d up. Rickie is just testing shafts, y’all
As you may have seen in our tour photos this week, Rickie Fowler has a new/old set of irons in the bag. Specifically, Fowler is gaming a set from 2013: the Cobra AMP Cell Pro.
But WHY?! Didn’t we just hear all the buzz about his self-designed Rev33? Well yes, we did.
Although the rumors and conspiracy theories may run wild, in this case, it’s a nothing burger.
He’s testing shafts folks, Dynamic Gold Tour Issue X100, specifically, to get ready for major season.
DETROIT, MICHIGAN – JULY 02: A detail of the bag and clubs of Rickie Fowler of the United States during the first round of the Rocket Mortgage Classic on July 02, 2020 at the Detroit Golf Club in Detroit, Michigan. (Photo by Gregory Shamus/Getty Images)
But why didn’t he put them in the Rev33?
That’s a simple one as well: time and economics. Rather than pull apart his gamers or have a set chauffeured in from Carlsbad, Fowler, who was messing around with the AMP’s at home and who doesn’t have Rev33’s with X1oo’s hanging on his wall, brought them to Detroit this week to test.
If all goes well, we can count on a set of Rev33’s with X100’s to be built at HQ. If not, no harm, no foul, and we go back to the Rev33 with his normal KBS C-Taper 125 S+ shafts.
If anything, I find the coolest thing here is Rickie’s instinct to not be wasteful. That’s a good thing right?
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
Tdawg
Jul 4, 2020 at 11:30 pm
Im just confused as to why dabble in a tournament??? All these guys have the best of the best in home sims with all the data and the best facilities to test equipment.
Shane
Jul 4, 2020 at 4:06 pm
I can see the testing of the shafts, but why at an event where you’re playing for a living instead of just testing at home? Thanks for the article!!
jmho
Jul 4, 2020 at 10:43 am
IF this is true, this seems stingy on behalf of Cobra. But I am gonna assume that he’s trying different irons altogether but they want to keep pushing the 33’s and it’s harder to do that when Rickie is playing something else.
Chip2win
Jul 3, 2020 at 7:38 pm
Uh…I hate to say it, but he’s not just testing shafts. After he hit a shot today on TV, you could clearly see he’s got the AMP Cells in the bag this week. They are pretty cool looking blades.
Mr C
Jul 4, 2020 at 11:19 am
Of course he’s using the Amp Cell Pro this week. It’s the entire point of this article. He using a set of Amp Cell Pro with X100 so he can test the X100 shafts as he doesn’t want to pull the shafts from him current gamers and replace them with the X100.
gwelfgulfer
Jul 4, 2020 at 8:11 pm
Although its a bit of a weak argument. If the ‘gamers’ were working so well, why not just use them. It takes them nothing to build/rebuild a set of irons.
Brandon
Jul 3, 2020 at 9:38 am
Might want to stick with the amps as he actually played well for the first time in a while yesterday.
Mr. C
Jul 4, 2020 at 11:21 am
The Amp Cell Pro are the best blades Cobra has ever produced in my opinion. I’m not surprised he played well with them.
Jack
Jul 2, 2020 at 11:43 pm
This story is so shallow and lacking in research ! Waste of space..
John Wunder
Jul 3, 2020 at 12:18 am
How exactly? The point to the story is there is to inform that 1) He’s just testing shafts 2) This was the easiest way to do it 3) He isn’t planning on switching out of his Rev33’s . Lacking in what research? It’s straight from the person who builds his clubs.
matt
Jul 2, 2020 at 11:12 pm
makes absolutely no sense… what does he learn from testing a shaft in a completely different head? I mean sure he might love this combo – but doesn’t mean squat for the performance in different iron. I think the rev is done – that club is ugly as sin and I think Rickie is coming to grips with his ill-conceived thoughts for that club.
John Wunder
Jul 3, 2020 at 12:25 am
Makes sense to him and the people that work with him. Unless I’ve been talking to a Cobra Tour Truck Catfish that is obsessed with golf club cover ups and conspiracies . That would actually be a fun reality show. Anyway thanks for reading;)
Nack Jicklaus
Jul 3, 2020 at 1:48 am
I’d watch Tour Truck Catfishing the reality show.
John Wunder
Jul 3, 2020 at 7:11 am
Right!!?? So would I
Brandon
Jul 3, 2020 at 9:41 am
Did you happen to ask the tour truck guy why Rickie prefers the F9 to the SZ? He seemed to take the SZ out of the bag really quickly at the beginning of the season.
Geo P
Jul 3, 2020 at 12:32 pm
Cool story, John! All these clowns saying negative stuff are just keyboard warriors that can’t break 100…..so their useless drivel means nothing! Keep up the great work ????
matt
Jul 3, 2020 at 8:27 am
love your content Johnny… I don’t doubt that’s what you were told. honestly I’m an iron shafts nerd – i think its a good story unto itself. Wonder what Rickie is after with the switch? He had that cup of coffee with S400s last year and got back into the the C-tapers. My guess is its a stats thing – probably sees how great his driving and putting is and thinks maybe the irons aren’t quite right somehow.