Equipment

Costco Kirkland Signature wedge review – GolfWRXers discuss

Published

6 years ago

Oct 14, 2020

In our forums, our members have been discussing Costco’s new Kirkland Signature wedges. WRXer ‘johnnied’ has managed to get his hands on a set and has shared his early experiences of the wedges with our members. Check out his review below.

“I PIcked up a set of the new Kirkland wedges at Costco (San Diego Morena) today. $159.99 Came as a set of three; a 52-10, a 56-10 and a 60-8. All lies are 64deg. The 52 is D3, the 56 and 60 is a D4. I went and hit a bucket off of mats, but more on that in a second.

The wedges are a tour chrome finish with a basic plain back with the words Kirkland Signature. The toe has the degrees and bounce inscribed. The face is cross milled and looks like the Vokey SM5’s The bounce pattern is similar to a Vokey “D” grind, and is the same on all wedges. The words “Carbon Steel” are etched into the back of the hosel. The shaft is a stepped pattern in steel. Don’t know whose. The grip is a black composition grip similar to a tour velvet with the words Kirkland Signature on it.

Overall the presentation is nice and professional looking. No razzle dazzle.

I hit the 52-deg first. Swing weight is D3, and it felt fine. I hit it about 105 yds, or about 10 yds shorter than my 50deg, which is expected. Hits and results were repeatable. One thing I found was that the shaft seemed lighter and a little softer than my Vokeys and if I tried to swing hard the head couldn’t catch up fast enough, and it felt like a hockey shot. But just slowing down a little produced the 105 yds over and over again. I could feel the clubhead on the entire swing, which I like. The wedges are tour chrome, and I’m used to black finish so looking down was different, but got used to it after a few shots. Lining the grooves up to the target line was easy.

Now the 56deg. Swing weight is D4, and felt fine. I hit it about 95 yds or about 5 yds shorter than my 54 Vokey (bent to 55). Same thing happened when trying to hit it hard, the shaft tip wouldn’t catch up, so timing was a little bit of an issue. Clubhead feel and lining up was good.

The 60deg has a bounce of 8 deg, is a D4, and seems to have a higher toe than the others.The high tow is good for when you open up the clubface to “loft” it up. Well, this is where the grind becomes a problem. With the “D” grind on the 60deg, opening up the clubface caused the hosel area and back center of the sole to dig. You could see the mat stroke lines at the back of the sole. What should happen is that the center of the sole should be the highest bounce, but because the sole is so deep when you open the clubface the back of the sole and hosel area catches, which closes the clubface, and shots went left.

My first thought was to take it into the garage and change the grind to more of an “M” grind. This would remove metal from the back of the sole and some from the hosel area. But before I do, I thought I’d experiment some more. So I hit some in-between shots and chips.

Chips and pitches were good and predictable. I could control the distance OK. Spin was excellent. Pitching 20-30 yds with the 60deg was the easiest of the three wedges.

I would have no hesitation putting these in my bag but would need a few mods first. 1. I’d grind down the 60deg so I could open up the face without digging. 2. Adjust the lies to 62deg (2 deg flat) and 3, change the grips to Lamkin cords. The last two are personal fitting issues that have nothing to do with the clubs.

So do I keep them or do I take them back? It was $159 for 3 wedges, great deal. My Vokeys are $184 each. I think I’ll do some grinding and tweeking and see if I can dial these in. And, at $159 I might just see if I can beat my buddy at the helicopter game.”

Our members have been reacting to the review from ‘johnnied’ in our forums.

Here are a few posts from the thread, but make sure to check out the entire discussion at the link below.

TheMoneyShot: “Nice review! I’m kind of surprised these are not being sold online yet.”
tbowles411: “Good review. Thank you. This will help get people in the game at an affordable price. Equipment without the excessive markup is great.”
nick_CO: “Great review. I might have to drag my buddy who has a membership to Costco to go get a set.”

Entire Th read: “Costco Kirkland Signature wedge review”

Related Topics:

Up Next

CJ Cup Tour Truck Report: New Callaway irons (and prototypes) in play, Rory in Fuji Ventus Black 6 X, new putter for Bubba

Don't Miss

‘Irons that go far but don’t have a ton of offset?’ – GolfWRXers discuss

Gianni Magliocco

Gianni is the Managing Editor at GolfWRX. He can be contacted at gianni@golfwrx.com

14 Comments

Pingback: Another Kirkland Signature wedge is coming to market? – GolfWRX
david

Jun 22, 2021 at 3:10 pm

Marketing: it’s amazing how powerful it is…put a name like vokey on a wedge or Scotty on a putter and you can charge $400 plus! I’m a 3.2 index and mostly due to my short game. My Cleveland tour wedges are getting old so being cheap I decide to try the Kirklands. The grips are too small, and the 60 degree is a half inch shorter, but here’s what I’ve found so far; I need to get used to them. At first I hit some poor shots, but having gone to the range I’m hitting the same as my Clevelands, distance and proximity wise. I always say; you can and will adapt to any club you play. If you’re on a tour you can make small adjustments with your clubs. I play amateur events and can putt usually better with my 1960 tourney MacGregor blade putter than most guys with their $500 fancy putters. bottom line; once I got used to these Kirklands they are giving me the same result…but I do practice a lot.

Reply Report comment
Ryan Gallier

Oct 14, 2020 at 4:10 pm

Can you provide the Costco item number on these wedges? They are impossible to find, and the Costco stores can’t even look it up with out this number. Help us regular folks out who really want to get a hold of these. Thanks.

Reply Report comment
- StevenChong
  
  Oct 22, 2020 at 4:49 am
  
  1460141
  
  Reply Report comment
Long not wrong

Oct 14, 2020 at 12:50 pm

This review is useless. He has a preference for a grind and he has a swing that likes his Vokeys. This is a review of his preferences not a review of the product. These wedges were designed for a broad audience not some club tweeker with a grinder and a Mitchell loft/lie machine in his garage. Just like all Kirkland products, people will love these wedges because they are the same product, same quality, similar design, manufactured the same way by the same manufacturers OEM Brands use. I have a set and they are in my bag. BTW, he could have simply read the box to know the shafts are True Temper.

Reply Report comment
Michaele

Oct 14, 2020 at 11:00 am

Hey Kernul …

You are entitled to your opinion, but your post reeks of effete snobbery. I highly doubt you would be critical in the same way if the brand were Titleist, Callaway, TaylorMade, etc. For all you know, one of those brands may be exactly what they are.

I don’t know a player with a handicap under 10 who isn’t tweaking their clubs whether it is in a custom fitting process or making changes and adjustments after purchasing the clubs. This is especially true with wedges.

Adjusting lofts, lies and grips is incredibly common and costs almost nothing. New steel shaft is maybe $40.

Let’s see … $160 for three wedges, $20 (max) three Tour Velvet grips, $125 for three Project X shafts (about $40 each give or take a few bucks and some elbow grease. Total cost $305 or $102 per club. Three Volkey SM8 wedges with no customization $480 ($160 each as low as it gets for stock setups).

How’s the golf snob act working for you now? Your words – “Sounds like a perfect fit for you.”

Reply Report comment
Kernul

Oct 14, 2020 at 10:20 am

First, you got hosed on your Vokeys.
Second, you think the clubs are fine, except you’d change all the lofts, all the lies and all the grips. You also stated repeatedly that the shafts didn’t work for you either.
Sounds like a perfect fit for you!
Appreciate the feedback on performance, feel and appearance, but I have trouble believing ANY discerning player would make these their first choice as sold. These are clearly marketed for the starter/novice enthusiast who just want a relatively flat and solid instrument to move their golf ball closer to the hole.

Reply Report comment
- Jack Nash
  
  Oct 14, 2020 at 11:36 am
  
  These clubs will grow the game. More people playing is what the industry has been lacking for decades. It was always “too pricey” for the avg. player. Now it might not be. How would you like to see some green fees come down? The more people that play the more choice they have and the fees will drop accordingly. I may or may not buy these but the idea is correct. More Golfers are needed, no matter their age.
  
  Reply Report comment
  - Not gianni
    
    Oct 14, 2020 at 1:05 pm
    
    Hahahaha green fees dropping in rates!!! Hahah tell another joke for me please
    
    Reply Report comment
    - Zuke
      
      Oct 14, 2020 at 5:10 pm
      
      If there’s more people playing, rates will go up not down due shortages of tee times. Not to mention it will now even be harder to make a tee time…
      
      Reply Report comment
phizzy

Oct 14, 2020 at 9:14 am

These wedges could be decent with after market steel shafts. I myself have the Miura HB in my 54 and 58, but I would be open to try these with the kbs 610 S+ flex which is what I currently game. Decent price point as well at 160 for the entire set.

Reply Report comment
- Kernul
  
  Oct 14, 2020 at 10:30 am
  
  These are Kmart prices with inherent Chinese-made, mass-produced, Kmart quality. Costco got fortunate with their golf ball, but just because these wedges have all the expected parts (grip, shaft, club head), it doesn’t make these anywhere near competitive with the big brand names.
  Also, I’m not an employee or representative of above mentioned big brand name companies. Honest.
  
  Reply Report comment
  - Scott
    
    Oct 26, 2020 at 12:36 pm
    
    Keenul, There is no way for you to know that without testing.
    
    Reply Report comment
  - Freddie J
    
    Oct 28, 2020 at 3:23 pm
    
    Many years ago, probably 34 years, I bought a cheap $3 closeout sand wedge at KMart that kind of looked like the old Pings. It was cheap Chinese junk back in the day when everything from China was junk. It had a sharp edge where you hit into the sand. It was fantastic. It held up well with a decent grip. It got me out of the sand every time. Sadly, I lost it moving.
    
    Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

2 days ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

2 days ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules