Equipment
More Golf launching full line of modular clubs
It was roughly five years ago that Bruce Sizemore unveiled the More wedge—a prototype design that was radically untraditional and uncompromising.
Today, Sizemore’s More Golf is announcing its first full release with the introduction of the MOD-1 irons, wedges, and putters to be available this spring.
“Every so often, a new idea comes around and totally changes the face of an industry. That’s what I believe a fully modular construction can do with golf clubs. We’ve reimagined the future of custom club fitting and what it means to be fully optimized as a golfer.” – Bruce Sizemore
Designed and built in the USA
More Golf is based in Jackson, Michigan, and the MOD-1 series of irons, wedges, and putters were developed in close partnership with Lomar Machine and Tools, a Jackson-area manufacturer that does work in aerospace, automotive, medical, and military fields. This gives More Golf, which is located only minutes from Lomar, a unique advantage when it comes to overseeing control of the manufacturing process.
The partnership with Lomar also puts More Golf in the position of achieving its long-term goal of being the only 100-percent American-made 14-club company.
Modular construction
The Mod-1 irons and wedges are fully modular meaning that each piece can be interchanged to create the perfect club for the intended golfer. According to More golf, the unique design attributes offer some distinct advantages:
- Weight savings – The modular construction removes 50 grams of weight from the hosel of the irons and wedges and adds it into the clubhead where it belongs to stabilize the head.
- Unique hosel position – By positioning the hosel up and in on the face, designers can move the shaft axis closer to the center of the clubhead for extra stability and improved turf interaction.
- Adjustable rear flange – The MOD-1 irons have what More golf calls a “dynamic flange design” intended to create versatility from any lie. The hosel-free leading edge and unique sole contouring helps achieve better contact regardless of the lie. At introduction the MOD-1 irons will be available with two distinct flange options; narrow and wide, with more to be available in the future.
-
- Mod 1 iron from address
-
- Mod 1 wedge from address
Pricing and Availability
The date for release has not yet been fully finalized with More Golf beyond the launch information of Spring 2021.
The initial release of the MOD-1 Series will be in limited quantities and pricing starts at $427 per iron and wedge and $447 for the Mod-1 Putters. For more information check out Moregolf.com
Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.
The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.
At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.
The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.
“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley
In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.
To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.
“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod
An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.
Pricing & Availability
The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.
In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:
“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.
My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”
And our members have been sharing their thoughts and suggestions in response.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- manima1: “You just can’t go wrong with Srixon ZXi7.”
- MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
- dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”
Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.
From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
Best fairway woods of 2026: The most versatile fairway woods + the most forgiving fairway woods
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
The 24 players who can win the Masters
Rory McIlroy’s winning WITB: 2026 Masters
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
J.J. Spaun’s winning WITB: 2026 Valero Texas Open
Cameron Young’s winning WITB: 2026 Cadillac Championship
Alex Fitzpatrick WITB 2026 (May)
Driver: Ping G440 LST (9 degrees) Shaft: Fujikura Ventus Black 6 X 3-wood: TaylorMade Qi4D (15 degrees) Shaft: Fujikura Ventus...
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Driver: Ping G440 Max (9 degrees) Shaft: Mitsubishi Tensei 1K White 60 TX 3-wood: Ping G440 Max (15 degrees) Shaft:...
WITB Time Machine: Rory McIlroy’s winning WITB, 2021 Truist Championship
Rory McIlroy’s victory at the 2021 Wells Fargo Championship 2021 (now the Truist Championship) marked a significant return to form,...
Collin Morikawa WITB 2026 (May)
Driver: TaylorMade Qi4D LS (8 degrees) Shaft: Mitsubishi Diamana D+ Limited 60 TX 3-wood: TaylorMade SIM Tour (14 degrees) Shaft:...
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days ago
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship
KSProf
May 30, 2021 at 10:38 am
The problem is mechanical connections come loose. You’re taking that thing with all those doodads attached and then moving it 80 or 90 mph until it smashes into an object, and you’re doing it again and again. Those bolts are coming loose. Golfers will have their clubs ratting and have to carry an allen wrench around everywhere or they won’t perform properly. Then those pieces will occasionally go flying off. You’ll shoot your eye out. As a lawyer of many years, be sure to load up on insurance, because products liability in the U.S. is strict as well as joint-and-several. I, for one, would advise any supplier and retailer who I had as a client that they shouldn’t do business with you. Of course, it will be a boon for the plaintiff’s bar if these ever do reach the market to any significant degree, so there’s that.
JP
Feb 5, 2021 at 3:40 pm
That sure looks like a lot of offset for a wedge. Ugly designs all around.
.
This idea isn’t what golfers want or need. It’s a lego/tinker toy for kids getting into the game.
Scott Nasiff
Feb 5, 2021 at 10:55 am
I thought Cleveland already had the patent for the ugliest clubs ever with the VAS irons?
I mean how does a group of people get together, look at these and think “hey I think we have something special here, let’s invest all of our savings”
HacknGolf
Feb 5, 2021 at 3:52 am
Good Lord…what did I just look at? I thought WRX had decency standards. No offensive pics allowed!
Karsten's Ghost
Feb 4, 2021 at 5:41 am
All I wanted was a switchable shaft. What is this mess?
expro
Feb 4, 2021 at 12:07 am
Makes the old Cleveland VAS irons look like a pure blade.
Herb
Feb 4, 2021 at 12:59 am
That’s exactly what I thought . They were actually really nice to hit . Didn’t Corey Pavin play them ?
chip75
Feb 4, 2021 at 8:25 pm
He won the US Open in ’95 with them.
Brandon
Feb 3, 2021 at 8:08 pm
If you ever wanted to swing a turd on a stick now is your chance.
Roland
Feb 3, 2021 at 10:48 pm
haha! Single file line, gentlemen!
Tony K
Feb 3, 2021 at 7:43 pm
Fugliest 3K you will ever waste
Garrett
Feb 3, 2021 at 5:59 pm
These clubs make my Pontiac Aztec look like a million bucks
K
Feb 4, 2021 at 4:30 pm
HAHA that is a good one!
Great idea, HORRIBLE execution.
Just think, someone out there believed in these jalopies enough to invest the resources so they could be brought to life. Fool and their money…
Wish i knew who it was cause BOY have i got some EXCELLENT quality swamp ground for sale!!!
Jeff
Feb 3, 2021 at 5:44 pm
I want to press “shank twice”
But it won’t let me.
Steve
Feb 3, 2021 at 4:45 pm
Just wait for Bryson to take these up and win a few majors. 🙂
Joakim
Feb 3, 2021 at 4:37 pm
Wow, that looks awful!
DB
Feb 3, 2021 at 2:37 pm
I think modular is a cool idea, I can definitely see the advantages. It’s already popular in woods and starting to come into putters more and more. Irons and wedges not so much. The hosel on these is very “Cleveland VAS” which I know some people swear by, although it’s a little challenging to look at.
Anyway the machining work is incredible. I’m sure they are expensive to make. Not sure about the prices though. I’m glad he’s doing this and I think it’s a cool venture. But $3k for a set of irons, I don’t know.
Gunter Eisenberg
Feb 3, 2021 at 1:36 pm
Looks like those clubs were designed by Tom Sizemore, not Bruce Sizemore.
Milo
Feb 3, 2021 at 1:32 pm
Lol, how dumb
Brian Aughe
Feb 3, 2021 at 12:56 pm
This is exactly what we need. Another wildly expensive golf club. Such a novel concept. I have no interest in these what so ever. I don’t care how good they are. At that price it’s almost a joke.
Daniel Diaz
Feb 3, 2021 at 12:55 pm
I was like, this is cool i might try them. But then i saw it was 500 bucks a club, uh yeah no
MORE GOLF
Feb 5, 2021 at 4:44 pm
Daniel,
We hope you do try them! Because they’re modular, you’ll be able to replace the club piece by piece instead of having to start over every time.
— MORE GOLF
stanley
Feb 3, 2021 at 12:45 pm
yes, this is ugly but i believe this is the way to go for all golf equipment moving forward. the truth is that not all golfers have access to accurate specs and fittings.
being able to modify your grind, bounce, hosel and weight will take golf fitting to whole another level.
Paulo
Feb 4, 2021 at 9:21 am
The only players who would benefit from the customisation you’re talking about really wouldn’t play a club this ugly
MORE GOLF
Feb 5, 2021 at 4:45 pm
Right on, Stanley!
— MORE GOLF
AWW
Feb 3, 2021 at 12:41 pm
“Your scientists were so preoccupied with whether or not they could, they didn’t stop to think if they should.”
Tim
Feb 3, 2021 at 12:21 pm
It is going to take a new generation of golfers to accept and adopt this form of equipment. The premise is mostly valid as we have seen the acceptance and validation of adjustable wood/metals. Cost is prohibitive for most of us, but look at PXG success. Fitting will be interesting and I would think an aftermarket of mods will grow out of it if successful.
ProjectX
Feb 3, 2021 at 4:17 pm
PXG’s success is an illusion. People don’t want to pay that much for clubs which is why they are trying to pivot into the cheaper 0211 line. They will quickly realize their is no profit there which is why Taylormade is up for sale AGAIN. The old saying is if you want to make a billionaire a millionaire just sell them a golf company. It’s an unpopular opinion but PXG will be gone by 2025. Parson’s, regardless of how much money he has, can only operate at a loss for so long before he rips the cord.
MORE GOLF
Feb 5, 2021 at 4:48 pm
Thanks for the feedback, Tim. Getting a proper fit initially is hugely important, but so is making modifications over time that make sense for a golfer’s game and their course conditions. That’s why we believe that modular golf clubs are the future.
— MORE GOLF
JDM Club Shill
Feb 3, 2021 at 12:12 pm
Can’t you just bend the lost and lie on your current irons? Not sure what the point is.
Happy Duffer
Feb 3, 2021 at 12:00 pm
Whooaaaa! Say hello to the new King of Ugly in irons!
Cameron
Feb 3, 2021 at 11:56 am
Please don’t give this wacko anymore coverage. Like the Simpson’s Halloween episode… “Just don’t look!!”