Equipment

Addressing club fitting’s biggest myth: It’s only for good players

Published

5 years ago

Jun 25, 2021

By far, one of the biggest misconceptions among golfers is that club fitting is only helpful to the most skilled who can really “tell the difference.” This couldn’t be further from the truth. Getting fit for a set of clubs is no different than getting fit for a suit or a dress — everybody can benefit from having something tailored just for them, whether it be simple adjustments or a full-blown bespoke experience.

To break down one of the club fitting world’s greatest myths, we have teamed up with Club Champion to help you better understand how the process can help you have more fun and play better golf.

What are the benefits of a club fitting for any level of golfer?

For higher handicap and more beginner golfers, a club fitting helps to eliminate unnecessary variables that work against you on the course and while practicing. Especially for beginners or people taking lessons, it’s imperative to have equipment that works with your body, not against it. The right clubs prevent you from having to compensate for things like lengths that are too short or grips that are the wrong size.
By working with a fitter, a golfer will get a better understanding of how his/her body and natural swing motion relate to their equipment.
A fitting will help any golfer find out exactly what they need to achieve their specific performance or scoring goals.
Fittings lead to lower scores, more distance, better dispersion, and a lot of other benefits whether you’re a high handicapper or a scratch golfer. The reason pros tinker with their clubs all the time is because details matter.
It’s not just about making your best shots better, it’s about making your worst shots more playable. This applies across all skill levels, and the more a fitter can help keep the ball closer to the intended target, the quicker you are going to see results on the course and on your scorecard.

How does a less skilled golfer specifically benefit from a club fitting?

The interesting thing is higher handicaps actually benefit more since there tends to be more low-hanging fruit that fitters can adjust that help them see instant results. In a way, it’s like making sure you have the right size bike — you’ll struggle to ride an improperly sized bike but as soon as you have the right fit, you’re flying.
As mentioned above, a fitting helps beginners by removing obstacles that work against their natural swing motion.
We fit a lot of golfers and generally, there’s an education gap with higher handicaps in terms of what technology is out there to help their game. We’ve had people come in with 20-year-old clubs who don’t know what sort of clubs are available on the market now and how much easier newer clubs can be to hit. If we use players on the lower end of the speed spectrum as an example – in the last 5 years have we seen a huge improvement in lighter weight shaft technology.
We see some of the biggest gains with putters, a club many golfers really don’t think that much about when it comes to fitting. Most golfers just buy the style that suits their eye, not their stroke, so there are massive improvements to be had on the green. It could be a whole new putter or just a grip and length change but when you consider how many shots you take on the greens, a 15-20 percent improvement can be a game-changer.

How does something on the level of a “basic” fitting help golfers over using off the rack?

Small details like shaft flex, length, and swing weight play a huge factor in success, and when you buy off the rack you’re just guessing on how those and many other factors will work for you.
Even just having your existing set adjusted will lead to better golf. Even if it’s not absolutely optimized, small tweaks are a lot more beneficial than off-the-rack clubs built for the masses.
No golfer is truly “average” in the sense that everyone’s body is so different. Height, swing motion, strength/speed, attack angle, etc. — all of these things change from person-to-person, even if everyone in the test group is the same handicap.
Lastly, stock clubs are mass-produced, which can lead to inconsistencies throughout the set and those variables can be addressed and eliminated even with a basic fitting.

Related Topics:

Up Next

Miller Lite X Bettinardi unveil patriotic Fourth of July collection

Don't Miss

How a significant putting change has helped Nelly Korda hit top form

GolfWRX Staff

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

12 Comments

Pingback: Fitter feedback: Club Champion fitters offer their best advice – GolfWRX
Pingback: What to expect during a club fitting – GolfWRX
CrashTestDummy

Jun 28, 2021 at 7:51 pm

Lessons will help more with mid to high handicap golfers, but still all golfers can benefit from club fitting. Ill-fit equipment (especially ill-fit shafts) can produce a lot of bad compensations in the golf swing. At the very least, it can put golfers in the equipment that can help them improve the most and shafts that fit according to their tempo, strength, and swing speed, as well as clubheads that that can aid them in hitting the ball better. The majority of golfers I see are using ill-fit equipment or very outdated equipment.

Reply Report comment
Brandon

Jun 28, 2021 at 12:14 pm

There isn’t a fitter in the world who can help you when you hit 5 inches behind the ball and chuck beaver pelts all over.

Reply Report comment
Aztec

Jun 28, 2021 at 11:02 am

I’ve known a lot of people who get fitted into a driver saying they chose a specific combo of head and shaft because it had the tightest dispersion during the fitting process. But they still have their fades turn into slices and draws turn into hooks with no less frequency than before. And then there are the ones who had their shafts ‘pured’ – I have NEVER seen this make any difference to anyone’s game.

Reply Report comment
Nonsense

Jun 28, 2021 at 3:34 am

Agreed with the comments.

Get length and lie close for high to mid cap. Wait until someone has a semblance of a repeatable action.

I’ve got mates that shoot in the teens, and fitting them would be a disaster. But I also know some shorter women, one of which is playing mens length and she obviously struggles. That’s not a fancy fitting; that’s just common sense.

Reply Report comment
A. Commoner

Jun 27, 2021 at 12:15 pm

Nothing like an independent free-thinking unbiased Fuller Brush sales pitch.

Reply Report comment
Alex

Jun 27, 2021 at 12:03 pm

Worst article written. Stop pushing fitting to a 20 handicapper who cant tell a difference between a hosel or a club face

Reply Report comment
Mooseface McStoner

Jun 27, 2021 at 1:17 am

There are 3 problems:
1. There are far too many people “fitting” golfers who are not qualified to be doing it… thus ruining the experience and perhaps even driving them away from the game.
2. Pretty much everyone trying to make this case have a vested interest in more people getting fit – and purchasing higher-end products.
3. People think more with their wallets than their brains. They can justify “clubs” because they are shiny and new and magic, and will undoubtedly improve their game – says so in the ads! Whereas good fitters tend to dispel the “shiny new magic” myths… so much so, you might end up with the same boring old clubs bent to new specs, or “just” new shafts. Far less drool factor.

All you need to is watch every single thread on new clubs: looks are discussed far more than performance. And not just on new release – eg; “I wouldn’t play the AP2 cuz they were too techy looking, but those new 2022 T100s! Yum!”. Looks over performance = new clubs over fitting.

Reply Report comment
geohogan

Jun 26, 2021 at 7:16 pm

IMO the most important aspect of club fitting is lie angle.
Soft carbon steel, irons bend out of proper lie angle very easily.

Ive never found sets of clubs being used by mediocre to very good players that didnt have at least one of two clubs with lie angles drastically different than clubs they hit the best.

These relatively small (2-4 degree) adjustments can be made with a bending bar, as long as, the shaft isnt held rigid. ie let the shaft bend as clubhead lie angle is bent. If shaft is held rigid in a vise, the clubhead is easily broken, especially with hard SS clubheads.

IMO with clubhead on the ground in proper hitting angle, all the grip butt ends should be the same distance from the ground. its that simple. Welcome criticism.

Reply Report comment
Walter Sobchek

Jun 26, 2021 at 12:30 pm

Aside from basic shaft length and flex club fittings for higher handicaps is overrated. Higher handicaps don’t have accurate, repeatable swings so the club fitter has a harder time figuring out the best lie angle, etc for them. Higher handicaps would do better spending their money on lessons, try to learn how to swing correctly, and produce a more repeatable, correct swing.

Reply Report comment
Danie

Jun 25, 2021 at 6:26 pm

Biggest Myth: “Quality club fitting is available to most golfers”.

These club fitting articles get annoying. I get it, get fit. Try it outside of mega golf centres and cities, I dare you. Not even to mention the awesome shaft and club selection available to female golfers if they eventually do get access to a fitting studio.

Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

2 days ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

2 days ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

2 days ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules