Equipment

Why does Aaron Beverly’s wedge have holes in it? A wedge expert explains

Published

4 years ago

Feb 16, 2022

Aaron Beverly received this year’s Charlie Sifford Memorial Exemption from tournament host Tiger Woods to play in the 2022 Genesis Invitational. Before even making his PGA Tour debut, Beverly is already making a splash in our GolfWRX forums with his unique wedges.

On Tuesday ahead of the event, we spotted Beverly with a unique set of wedges. Each of his Titleist Vokey SM9 wedges (52, 56 and 60 degrees) have two holes in their back cavities; one on the toe portion and one on the heel.

With our GolfWRX forum members speculating why the holes are there, I wanted to get the real answer. For that, I went straight to Titleist’s Vokey Tour rep Aaron Dill – the man who worked on Beverly’s wedges himself – to get the inside scoop.

According to Dill, there are two main reasons for drilling out, or “porting,” holes in his wedges:

“The first reason would be to reduce swing weight,” Dill explained. “He’s a little bit long, he’s a half-inch over standard length, but he likes standard swing weights. And it’s really tough at a half inch to get him down to D5 and D3, so that’s the first reason.

“The second reason is because it looks cool. Part of it is, yes, we want to balance up the weight. Whatever we’re going to pull from it I want to make sure it’s even on both sides. The other part of it is I don’t want to disturb the BV wings. I’m trying to stay out of there and have a little respect for The Man (master craftsman Bob Vokey, for which the wedges are named). But, other than that, it’s really more about hitting the tolerance and the specs that [Beverly] wants us to hit, and in order for us to do that accurately, we have to port them.”

For those of us who like to experiment with custom club building for ourselves, take Dill’s work as a valuable lesson. For every action there’s a reaction with club building, so make sure that when you change the length of your club setup that you keep an eye on swing weight and make the proper weighting adjustments. You don’t want to drastically change one variable when you’re trying to change another variable in isolation.

Beverly’s wedge set, as you may notice, doesn’t have a uniform finish throughout; he uses a Jet Black 52 and 56 degree wedge, but his lob wedge has a chrome finish. Dill explains why:

“The cool thing about [Beverly’s] set is he actually has a black gap wedge and sand wedge, and then the lob wedge is chrome. I asked him, ‘What’s up with that?’ He’s just like ‘This is what I like.’ I thought that was cool. That’s kind of his thing. Most guys would maintain the same finish throughout, and the majority of guys out here use raw. But for a handful of guys like Cam Smith, Callum Tarren, etc., there’s a handful of guys that really love the darker finish and go with the Jet Black.”

That’s the fun part of customizing your wedges: You can make them functional and practical, while still expressing yourself with things such as custom stampings, the finish, or even ported holes.

Check out all of our photos from the 2022 Genesis Invitational here.

Up Next

What would you get if you had to spend less than $400 on irons? – GolfWRXers

Don't Miss

Johnny Miller’s 1973 winning U.S. Open WITB…which includes a pre-war 4-wood

Andrew Tursky

He played on the Hawaii Pacific University Men's Golf team and earned a Masters degree in Communications. He also played college golf at Rutgers University, where he graduated with a Bachelor of Arts in Journalism.

11 Comments

LUFC Fan

Feb 23, 2022 at 2:38 pm

Minor third thing is it raises the swing weight higher in the wedge which can help achieving a lower flight and increase spin. Definitely helps with players who want lighter swing weight though.

Reply Report comment
drumdude96

Feb 20, 2022 at 12:00 pm

I guess the guys in the Titleist tour van have never heard of deburring. He Aaron Dill, every seen a countersink before?! Someone’s going to get their fingers cut on the burrs and sharp edges of those port holes. Terrible workmanship.

Reply Report comment
drumdude96

Feb 20, 2022 at 11:57 am

I guess the guys in the Titleist tour van have never heard of deburring? Someone’s going to get their fingers cut on the burrs and sharp edges of those port holes. Half-a$$ed work, if you ask me. Hey Aaron Dill, ever heard of a countersink?!

Reply Report comment
Pingback: Tour Report: Rickie Fowler switches to a TaylorMade putter and JT makes a wedge switch – GolfWRX
ericsokp

Feb 18, 2022 at 1:22 pm

Yeah, that must be what’s wrong with my game … my wedges are at D5 instead of D3! I believe that equates to a whopping 6 grams of club-head weight? 🙂

Reply Report comment
- Cantstandya
  
  Nov 3, 2024 at 1:08 pm
  
  Bozo. Half inch over puts the SW at D8. Dill is D5 in wedges and D3 in irons.
  
  Reply Report comment
burner accnt gianni sux

Feb 17, 2022 at 6:01 pm

“The second reason is because it looks cool. Part of it is, yes, we want to balance up the weight. Whatever we’re going to pull from it I want to make sure it’s even on both sides. The other part of it is I don’t want to disturb the BV wings. I’m trying to stay out of there and have a little respect for The Man (master craftsman Bob Vokey, for which the wedges are named). But, other than that, it’s really more about hitting the tolerance and the specs that [Beverly] wants us to hit, and in order for us to do that accurately, we have to port them.”

two words, get real

Reply Report comment
Eric

Feb 17, 2022 at 10:13 am

This is huge. They should offer this. I play +.5 and struggle with my vokeys. I always leave them at stock length because of the swing weight issue. I’ve felt Vokey’s +.5″ and they are nearly unplayably heavy. So I just squat more when I have wedges in hand.

Reply Report comment
- Joe
  
  Feb 17, 2022 at 1:29 pm
  
  Get raw wedges and pick a couple grinds on Wedgeworks, that should drop the SW to about right..
  
  Reply Report comment
  - Eric
    
    Feb 18, 2022 at 10:26 am
    
    I play Vokey 60.08 M as one of my wedges, as an example. Ordering that wedge raw has no impact on swing weight and Im not interested in other grinds.
    
    But even if I were, grinding has almost no impact on swing weight. I would need 6 grams ground off the wedge to meet my needs at +1/2. Aaron Beverly has 2 x 3gram holes drilled in his wedges. You can see how much metal needs to be removed.
    
    Reply Report comment
- drumdude96
  
  Feb 20, 2022 at 11:53 am
  
  This is nothing new. People have been porting wedges since forever. You can easily do it yourself if you have any mechanical ability at all and a few basic tools.
  
  Reply Report comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Putters that never made it: Check out some of the best tour builds that didn’t make the cut

Published

2 weeks ago

May 18, 2026

Alistair Cameron

Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.

So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)

Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.

Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.

Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.

Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.

Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.

Whats in the Bag

Patrick Reed WITB 2026 (May)

Published

2 weeks ago

May 18, 2026

GolfWRX Staff

Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX

3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X

7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X

Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype

Ball: Titleist Pro V1x

Grips: Golf Pride MCC

See more photos of Patrick Reed’s clubs here.

Equipment

Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss

Published

2 weeks ago

May 18, 2026

Gianni Magliocco

In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:

“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.

Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”

And our members have been naming their favorites and why in response.

Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”

Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”