Equipment

L.A.B. Golf DF3 putter review – Club Junkie Reviews

Published

2 years ago

Feb 15, 2024

I know a lot of golfers haven’t heard of L.A.B. Golf, but they are a putter company making some serious waves in the golf space. Their Lie Angle Balanced putters have been a hit with amateur golfers for years, and we are now seeing more and more showing up in the bags of professional players. Lie Angle Balanced putters are built so that when you rest the putter horizontally, the face points at the target.

L.A.B. Describes Lie Angle Balance: “Lie Angle Balance (L.A.B.) Technology makes it effortless for golfers to deliver a square putter face at impact because, unlike other putters, it keeps the putter face square to the arc throughout the stroke. It makes putting as easy as picking the right line, the right speed, and making your natural stroke.”

I will admit that the DF3 is not the first L.A.B. Golf putter that I have owned or reviewed. I have had the pleasure of rolling the original Mezz.1 and the larger Mezz.1 Max putters as well. But the new DF3 looks very good when you take it out of the box. The Platinum finish has enough texture to ensure you won’t have to worry about glare from the sun but also has a depth to it that looks luxurious. I think L.A.B. nailed the size of the DF3 as it is compact but has some thickness to it that is very proportionate. Picking up a ball is also so easy and simple, just set the hole in the rear of the putter down on the ball. With almost zero pressure the ball sticks to the putter and you effortlessly bring it up.

I rolled the DF3 initially indoors for about 4-5 days and the first thing I noticed was the softer feel and very muted sound. Across the entire face you get a slightly softer feel than the Mezz.1 Max but it isn’t mushy or unresponsive. You can still tell when you mishit the ball or strike it dead center on the face.

When you get the DF3 on a real green, you can see how the horizontal grooves on the face produce a smooth roll with plenty of topspin and very little skid or hop. L.A.B.’s lie angle balance does just work and it has proven in every putter head they make. The face stays pointed at the target through the whole stroke without any need for you to manipulate it. I found that for me very light grip pressure allows the putter to move straight back and straight through the ball, getting it started on line easily and consistently.

Confidence on short putts is through the roof as you know you just have to aim the putter correctly in order to make a short and straight putt. Greens here in Michigan are far from smooth in February, but I never once felt like I didn’t start my putt on the intended line. Longer putts for me took a little more practice to get used to as you don’t have to try and guide the face back to square on a bigger backswing. Trusting that the DF3 will be square to your target is all you have to do, then just pull the putter back and let it go. Lag putts are very accurate and after a little while you start to imagine that you should make a few more than you statistically should. Once you get comfortable with a L.A.B. putter, it all comes down to your read and the speed you hit the putt.

The DF3 does have a little different feel than my Mezz.1 Max, and I have to think that’s due to the added stability of the DF3. The new putter also has a new grip that feels a little more familiar in your hands, a pistol version of the Press grip. Press grips are designed where the shaft installs on an angle, vertically through it, to work with the forward press in the shaft angle. This new pistol option is immediately comfortable and sits in the pads of your fingers really well. The pistol shape feels more traditional compared to the more oval shape of the Press II that I have on my Mezz.1 Max. L.A.B. also added some texture to the grip and that should provide some added tackiness when the hot and humid summer days roll in.

Overall, I think L.A.B. Golf did a wonderful job with the new DF3 putter. They were able to enhance the shape of the head, increase stability, and keep the same Lie Angle Balance technology working in harmony together. Add these up, and I think golfers who were turned off by the looks of the DF2.1 will be excited to try the DF3.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

1 day ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

1 day ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules