Opinion & Analysis
Shop safety: An often forgotten part of club building
The more I read forum threads in regards to club building, the more I see topics such as:
- How do I get started in club building and repair?
- What are the basic tools needed for club building and repair?
- How do you (insert any club repair task)?
The one topic that seems to get over looked is shop safety. Maybe it’s because we “Do-it-yourselfers” don’t expect to injure ourselves in the process. Unfortunately, many injuries occur when people least expect them to happen.
That’s I decided to invite some GolfWRXers to weigh in on the topic; members whose skills and experience range from master club builder to hobbyist. With over 60 years experience in the field, we came up some shop safety procedures and ideas that you can follow to reduce the risk of injury. Some of them are as basic as protective eye and footwear, while others relate to hazards you may not have been aware of.
Let’s start with basic shop set up. How you choose to lay out your work area is up to you, but it is a very good idea to add the following in your setup:
Ventilation: Working with chemicals and grinding/sanding machines can produce harmful fumes, smoke and other airborne particles such as graphite and dust. Along with a good ventilation system, it’s wise to wear a quality ventilation mask while working with items that may create breathing hazards.
Non-slip mats: Having them around your work area will reduce slip and fall injuries due to spilled chemicals. While we are speaking of slip and fall injuries, keep your work-area flooring clean and tidy. This will reduce the chances of injury for you, as well as those who might walk by.
Metal Garbage Can & Lid: The location of your garbage can/waste basket should be away from any open flames or sparks.Paper towels and chemical-soaked tape and rags can easily catch fire from sparks flying off grinders and cutters.
Basic First Aid Kit & Eye Wash Station: Any time chemicals and solvents are involved and there is a chance of eye contact, keep a basic first aid kit and eye wash station near the work area where eye irritants are being used.
Eye & Ear Protection: A pair of protective goggles were the No. 1 item discussed when it came to shop safety. Always wear eye protection, especially when using a wire brush wheel to deburr the end of a steel shaft after cutting or while using any other grinding/sanding wheel. The levels of noise power tools make can easily damage hearing over a period of time, sp be sure to wear ear protection as well.
Having “the right tools for the job” seems cliché, but the statement is worth repeating. Taking shortcuts with an improvised tool is one of the fastest ways to injure yourself. It’s just not worth cutting a corner to save time or a buck or two.
As an example: Never use a hypodermic type needle device to inject solvent between the grip and the tape as a way to remove and re-use the grip. While it certainly can work and has been done a lot over the years, the risk of an accidental “injection” into your hand is great. The chemicals and solvents used can cause serious infection, and in some cases they can lead to the loss of the finger or hand.
Another example of an ill-advised shortcut would be to sand lead tip weights rather cut them. Using a sanding wheel creates airborne lead dust and over time is not healthy to a club builder.
Hook Blade: Use a hook blade when removing grips or tape from a shaft and always cut AWAY from you.
Leather Work Gloves: Heating up club heads for removal and using sanding/grinding wheels tend to heat shafts and heads more than expected, even after they sit for a while. Wearing a pair of leather work gloves will reduce the chance of burning your hands on heated metal.
Take care of your tools and your tools will take care of you
Always check your tools to see if they are functioning properly before starting any project. A quick inspection can ensure a safe operating area and reduce the chance of injury. Before you start:
- Check all table-mounted tools to ensure they are mounted securely.
- Check sanding belts on a regular basis for cuts or splits. While it’s not common, a belt that separates completely while the machine is running can hit a club builder in the face or hands. Their edges can cut skin.
Prepping for the job can reduce cuts and scrapes. Taping off the ends of a broken shaft is a great example of this. When club builders prepare and plan, they reduce the chances of unwanted injuries and mishaps.
Dress for Success
Also much overlooked (especially for the Do-it-yourselfer) is dressing for the job. Never wear baggy or loose clothing that can be sucked into power tools or get tangled in them. Also, always wear protective closed-toed shoes. When working with chemicals, solvents and epoxy, wearing an apron can reduce the chance of soaking your clothes with flammable liquids. That’s good for your wallet (you won’t need to buy as many new clothes) and your safety.
The topic of shop safety is never ending discussion, as it should be. Safety procedures should always be learned and adhered to when working on clubs or any other home/shop projects.
I would like to take the time and thank the following GolfWRX members for all their input for this article: Mxtitleistgolfer, Tobybear, Super Tuna, Knudson81, Awalkspoiled, Hispl, Sean2, Dscvrr St Louis, Deck and a special thank you to Tom Wishon for taking the time out his busy schedule to give his input on this topic.
Opinion & Analysis
Brandel Chamblee PGA Championship Q&A: Rose’s huge McLaren risk, distracted LIV pros and why Aronimink suits the bombers
PGA Championship week is here, and Brandel Chamblee did not hold back in our latest discussion ahead of the season’s second major.
In our 2026 PGA Championship Q&A, golf’s leading analyst made the case that PIF pulling LIV’s funding has left its players competing in a state of confusion, called Justin Rose’s mid-season equipment switch a huge risk at 45, and explained why Aronimink will be a bombers’ delight this week.
Check out the full Q&A below.
Gianni: With the PIF confirming that they’re pulling funding from LIV at the end of the season, what impact do you expect that to have on the LIV players competing at the PGA Championship?
Brandel: I would imagine that they have all been thrown into a state of confusion, and will be distracted, not knowing where they are going to play next year and not knowing exactly their road back to either the DP World Tour or the PGA Tour. Or in Rahm’s case, being tied to a sinking ship for the next few years, likely playing for pennies on the dollar in events that no one cares about or watches.
I doubt this would put him in the best frame of mind to compete at his highest level. Keeping in mind, however, that majors are the only time that LIV disciples get to play in events that matter, so never disregard the motivation they have to prove to the world they are still relevant.
Gianni: Justin Rose switched to McLaren Golf equipment mid-season while playing some of the best golf of his career. What do you make of the change?
Brandel: I don’t really know what to make of Rose switching equipment. It seems a huge risk on his part, even though it is likely, in my opinion, that the clubs he’s playing are similar, if not the exact grinds, to what he was playing previously, with a McLaren stamp on them.
Having said that, at best, it is a distraction when he seemed to be as dialed in with his game as any 45-year-old could be and trending in the majors to perhaps do something that would definitely put him in the Hall of Fame. At worst, given the possibility that these clubs aren’t just duplicates of his old set stamped with McLaren on them, he’s made an equipment change that would take time, and 45-year-old athletes don’t have the time to do such things.
Gianni: Aronimink has only hosted a handful of professional events since it hosted the 1962 PGA Championship. What kind of test does it present, and does a course with less recent major championship history tend to level the playing field?
Brandel: Even though Aronimink has only hosted a handful of meaningful professional events, it has been fairly discerning in who can win there. When Keegan Bradley won the BMW Championship on the Donald Ross masterpiece in 2018, he was the 2nd best iron player on tour coming into that week. When Nick Watney won the AT&T at Aronimink in 2011, he was 2nd in strokes gained total coming into the week.
In 2020, Aronimink hosted the KPMG Championship, and Sei Young Kim won. On the LPGA that year, she was first in greens in regulation, putts per green in regulation, and scoring average on the way to being the LPGA player of the year. And then there is the 1962 PGA Championship won by Gary Player, who eventually became just one of a few players to win the career grand slam on the way to winning 9 majors. It is a formidable test, and if it’s not softened by rain, it will bring out the best in the upper echelons of the game.
Gianni: Is there a specific hole at Aronimink that you think will do the most to decide the winner?
Brandel: The hardest hole at Aronimink in each of the three tour events that have been played there since 2010 has been the long par-3 8th hole, with the par-4 10th being the second hardest, so most of the carnage will happen around the turn, but with the par-5 16th offering opportunities for bold plays and the tough closing holes at 17 and 18, the finish is likely to be frenetic.
Gianni: The PGA Championship has always sat in the shadow of the other majors. What does the ideal PGA Championship look like in your eyes, and what would it take for it to carve out its own identity?
Brandel: The PGA Championship, to whatever degree it suffers from the comparison to the other three majors, is still counted just as much when adding them up at the end of one’s career. Almost 1/3 of Nicklaus’ major wins were the five PGA Championships he won. Walter Hagen won 11 majors, five of which were PGA Championships.
Tiger Woods twice in his career won back-to-back PGA Championships, and those four majors count just as much as the other 11 he won. The PGA may not have the prestige of the other three, but it carries the same weight. Having said that, I preferred the identity that it had as the last major of the year.
Gianni: You nailed your Masters picks. Rory won, Scottie finished solo second, and Morikawa surged to a tie for seventh. Who are your top 3 picks for the PGA Championship and why?
Brandel: I am not a huge fan of majors played on golf courses that have been shorn of most of the trees, although I understand some of the agronomic reasons for doing so and of course the ease with which it allows members to play after errant drives. However, at the highest level, it all but eliminates any strategy off the tee and turns professional golf into an even bigger slugfest. That means that it will likely be a bomber’s delight this week, but fortunately, Scottie Scheffler is long enough to play that game and straight enough to play it better than anyone else.
The major championships give us very few surprises anymore, going back to the beginning of 2012, so the last 57 majors played, the average world rank of the winners has been better than 15th in the world. So look at the highest ranked and longest drivers who are on form coming into the PGA Championship who also have great short games as the surrounds at Aronimink are very challenging. That’s Scottie Scheffler by a mile and then McIlroy and Cameron Young with a far bigger nod towards DeChambeau than I gave him at the Masters.
Club Junkie
A putter that I love and hate – Club Junkie Podcast
In this episode of the Club Junkie Podcast, we dive into one of the most interesting flatstick releases of the year with a full review of the new TaylorMade SYSTM 2 putters. After spending time on the greens, I break down what makes this design stand out, where it performs, and why it has me completely torn between loving it and fighting it. If you are into feel, alignment, and consistency, this is one you will want to hear about.
We also take a look at some of the putters in play on the PGA Tour last week. From familiar favorites to a few surprising setups, there is always something to learn from what the best players in the world are rolling with under pressure.
To wrap things up, I walk through the process of building a set of JP Golf Prime irons paired with Baddazz Gold Series shafts. From component selection to performance goals, this is a deep dive into what goes into creating a unique custom set and why this combo has been so intriguing.
Opinion & Analysis
From 14 handicap to pro: 4 things I’d tell golfers at 50
This year my 50th birthday. Gosh, where has the time gone?
As a teenager in rural Missouri, some of my junior high and high school years felt interminable. Graduation seemed light years away. But the older I get, the faster life seems to fly by.
I’m also increasingly aware of my mortality. My dad died recently. Earlier this year, a friend and fellow PGA of America professional and I were texting about our next catch-up. The next message I received was news of his unexpected passing at 48. Shortly after, a woman I dated in college succumbed to cancer at 51.
Certainly, one can share perspective at any age. Seniors help freshmen, veterans guide rookies. But reaching this milestone feels like as good a time as any to do one of those “what would I tell my younger self?” articles.
I’ve had a uniquely varied career in golf. I started as a 27-year-old, average-length-hitting, 14-handicap computer engineer and somehow managed to turn pro before running out of money, constantly bootstrapping my way forward. I’ve won qualifiers and set venue records in the World Long Drive Championships, finished fifth at the Speedgolf World Championships, coached all skill levels as a PGA of America professional, built industry-leading swing speed training programs for Swing Man Golf, helped advance the single-length iron market with Sterling Irons®, caddied on the PGA TOUR and PGA TOUR Champions, and played about 300 courses across 32 countries.
It’s been a ride, and I’ve gone both deep and wide.
So while I can consult and advise from a lot of angles, let me keep it to a few things I’d tell the average golfer who wants to improve.
1. Think About What You Want
Everyone has their own reason for picking up a golf club.
Oddly, as a professional athlete, I’m not internally driven by competition. That can be challenging, as the industry currently prioritizes and incentivizes competition over the love of the game.
For me, I love walking and being outdoors. Nature helps balance my energy. I prefer courses that are integrated into the natural beauty of their surroundings. I’m comfortable practicing alone. I’m a deep thinker, and I genuinely enjoy investigating the game, using data and intuition to unearth unique, often innovative insights. I’m fortunate to be strong and athletic, so I appreciate the chance to engage with my abilities. Traveling feels adventurous. I could go on.
You don’t have to overthink it like I do. For you, it might be as simple as hitting balls to escape work, hanging out with friends, and playing loosely with the rules and the score.
The point is to give yourself permission to play for your own reasons, and let that be enough.
But if improvement is your goal, thinking about your destination—and when you want to get there—is important, because it dictates the steps you need to take. When I set out to go from a 14-handicap to the PGA TOUR as quickly as possible, the steps I needed were very different from those of a working golfer trying to break 90 in six months. That’s also different from someone who just wants a few peaceful hours outside each week, away from work or family.
None of these goals are better than the others, but each requires a different plan that you can work backward from.
2. There Are Lots of Things That Can Work
One of the challenges of golf is that, although there are rules for playing, there aren’t clear, industry-wide standards for how to best play the game. There’s a lot of gray area.
You might hear a top coach or trainer insist that a certain move is the best way to swing or train. Then you dig a bit deeper and, much to your confusion and frustration, another respected coach or trainer says something completely different. I don’t think anyone is trying to confuse you—at least I hope not. It’s just where the industry is right now.
You have to be careful with advice from tournament pros, too. They might be great at scoring, but they’re also human and sometimes just as susceptible as amateurs to believing things that don’t really move the needle. Tour players might describe what they feel, but that’s not always what they’re actually doing when assessed with technology.
I recently ran a test on my YouTube channel (which connects to my GolfWRX article “How to use your hands in the golf swing for power and accuracy”), and, interestingly, two of the most commonly taught hand actions produced the worst results in the test.
Coaches can certainly help. If you find someone you connect with to help navigate, that’s great. But there are many ways to get the ball in the hole. In the current landscape, you may need to seek multiple opinions, think critically, and use your own intuition to discern what seems true and whose advice resonates with you.
I’d recommend seeking someone who is open-minded and always learning, because things constantly change. Absolutes like “correct” or “proper” should raise a red flag. AI can be useful, but it tends to confidently repeat popular advice, so proceed with caution.
3. Get Custom Fit
If you’re serious about becoming a better player, getting custom fit is hugely important. There’s no sense fighting your equipment if you don’t have to. Most better players get fit these days and, if they don’t, they’re usually skilled enough to work around clubs that aren’t ideal.
If you plan to play for a long time, it’s worth spending a little more upfront to get something that truly fits you and your game, rather than continually buying and discarding equipment.
Equipment rules haven’t really changed significantly since the early 2000s. To stay in business, manufacturers keep pushing those limits. If you pull a bunch of clubs and balls off the rack and test them, you’ll find differences. I’ve tested two new drivers and seen a 30-yard total distance gap. Usually, the issue isn’t bad equipment; it’s that the combination of components simply isn’t the best fit.
It’s like wearing a new pair of floppy clown shoes. Sure, they’re shoes—but you won’t sprint your best in them compared to track shoes that fit perfectly.
Be wary of what’s called custom fitting, too. Sometimes the term is used as a marketing strategy rather than an actual fitting. In some retail settings, fitters may be incentivized to steer you toward higher-priced components. That doesn’t automatically mean it’s not the best fit, but you should be aware of potential biases.
I learned a version of this lesson outside of golf. Years ago, I bought a tennis racquet at a big box store from a seemingly knowledgeable employee who thought it would suit me best. The racquet gave me tennis elbow, and I spent months recovering with rest and acupuncture. The next season, I invested more time and money to find what actually fit me, and I walked away with something amazing that I still play with years later.
So if you’re going to get fit, be smart about it.
Find someone you believe has deep knowledge—possibly with certifications, but not necessarily. Make sure there’s a wide inventory across many brands. Check recent reviews for the individual fitter if possible. Make sure you trust that the fitter has your best interests at heart. If they’re wearing a hat or shirt with a specific brand’s logo, proceed with caution. Unless you specifically want a certain brand or look, be wary of upsells, especially if two options perform nearly the same.
Also, while golf is called a sport of integrity, there’s a thread of manipulation in the industry. I once drafted an equipment article for an industry magazine, structured just like one of their previous popular stories, with matching word count and great photos. The assistant editor loved it; it was useful to readers and required little work on his part. But the editor-in-chief nixed the story. When I asked why, I was told it was because I wasn’t an advertiser. It turned out the article I’d modeled mine after was a paid ad cleverly disguised as editorial content.
I really dislike games, clickbait, and fear-based manipulation. I hope this changes, but golfers deserve to know it exists.
4. Distance and Strategy Matter
There’s a real relationship between how far you hit the ball and your scoring average, even at the PGA TOUR level.
I experienced this early in my pro career. I started as a power hitter, swinging in the high 120s and breaking 200 mph ball speed with a stock driver.
Back then, some instructors advised swinging at 80%, so I tried slowing down for more accuracy. That worked fine on shorter, tighter courses. But on longer setups, I was coming into greens with too much club, and par 5s stopped being
-
Equipment2 weeks agoJustin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
-
Equipment1 week agoWhat’s the story behind Webb Simpson’s custom-stamped irons?
-
Equipment2 weeks agoCadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
-
Whats in the Bag3 days agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag1 week agoCameron Young’s winning WITB: 2026 Cadillac Championship
-
Whats in the Bag3 weeks agoNelly Korda WITB 2026 (April)
-
Equipment2 weeks agoJustin Rose on the switch to McLaren Golf, learnings from previous equipment moves
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 Cadillac Championship

AndrewD
Oct 7, 2013 at 7:18 am
Work gloves are good for lots of things but don’t use them while grinding! There’s nothing like getting your hand pulled into a bench grinder to ruin your day. If the club is getting too hot while grinding, you just need to take a break and let it cool in the air.
Hugo Lazarde
Oct 4, 2013 at 3:25 pm
Sorry for the misspeeling. It’s beca use of the Android corrector…
Hugo Lazarde
Oct 4, 2013 at 3:20 pm
Safety First… Even for the Most experienced, there is always the chance of ante accidente…
Good article…
Kadin Mahmet
Oct 4, 2013 at 7:33 pm
Thank you for taking the time to read and post! Simple steps can save a trip to the ER.