Opinion & Analysis
Shop safety: An often forgotten part of club building

The more I read forum threads in regards to club building, the more I see topics such as:
- How do I get started in club building and repair?
- What are the basic tools needed for club building and repair?
- How do you (insert any club repair task)?
The one topic that seems to get over looked is shop safety. Maybe it’s because we “Do-it-yourselfers” don’t expect to injure ourselves in the process. Unfortunately, many injuries occur when people least expect them to happen.
That’s I decided to invite some GolfWRXers to weigh in on the topic; members whose skills and experience range from master club builder to hobbyist. With over 60 years experience in the field, we came up some shop safety procedures and ideas that you can follow to reduce the risk of injury. Some of them are as basic as protective eye and footwear, while others relate to hazards you may not have been aware of.
Let’s start with basic shop set up. How you choose to lay out your work area is up to you, but it is a very good idea to add the following in your setup:
Ventilation: Working with chemicals and grinding/sanding machines can produce harmful fumes, smoke and other airborne particles such as graphite and dust. Along with a good ventilation system, it’s wise to wear a quality ventilation mask while working with items that may create breathing hazards.
Non-slip mats: Having them around your work area will reduce slip and fall injuries due to spilled chemicals. While we are speaking of slip and fall injuries, keep your work-area flooring clean and tidy. This will reduce the chances of injury for you, as well as those who might walk by.
Metal Garbage Can & Lid: The location of your garbage can/waste basket should be away from any open flames or sparks.Paper towels and chemical-soaked tape and rags can easily catch fire from sparks flying off grinders and cutters.
Basic First Aid Kit & Eye Wash Station: Any time chemicals and solvents are involved and there is a chance of eye contact, keep a basic first aid kit and eye wash station near the work area where eye irritants are being used.
Eye & Ear Protection: A pair of protective goggles were the No. 1 item discussed when it came to shop safety. Always wear eye protection, especially when using a wire brush wheel to deburr the end of a steel shaft after cutting or while using any other grinding/sanding wheel. The levels of noise power tools make can easily damage hearing over a period of time, sp be sure to wear ear protection as well.
Having “the right tools for the job” seems cliché, but the statement is worth repeating. Taking shortcuts with an improvised tool is one of the fastest ways to injure yourself. It’s just not worth cutting a corner to save time or a buck or two.
As an example: Never use a hypodermic type needle device to inject solvent between the grip and the tape as a way to remove and re-use the grip. While it certainly can work and has been done a lot over the years, the risk of an accidental “injection” into your hand is great. The chemicals and solvents used can cause serious infection, and in some cases they can lead to the loss of the finger or hand.
Another example of an ill-advised shortcut would be to sand lead tip weights rather cut them. Using a sanding wheel creates airborne lead dust and over time is not healthy to a club builder.
Hook Blade: Use a hook blade when removing grips or tape from a shaft and always cut AWAY from you.
Leather Work Gloves: Heating up club heads for removal and using sanding/grinding wheels tend to heat shafts and heads more than expected, even after they sit for a while. Wearing a pair of leather work gloves will reduce the chance of burning your hands on heated metal.
Take care of your tools and your tools will take care of you
Always check your tools to see if they are functioning properly before starting any project. A quick inspection can ensure a safe operating area and reduce the chance of injury. Before you start:
- Check all table-mounted tools to ensure they are mounted securely.
- Check sanding belts on a regular basis for cuts or splits. While it’s not common, a belt that separates completely while the machine is running can hit a club builder in the face or hands. Their edges can cut skin.
Prepping for the job can reduce cuts and scrapes. Taping off the ends of a broken shaft is a great example of this. When club builders prepare and plan, they reduce the chances of unwanted injuries and mishaps.
Dress for Success
Also much overlooked (especially for the Do-it-yourselfer) is dressing for the job. Never wear baggy or loose clothing that can be sucked into power tools or get tangled in them. Also, always wear protective closed-toed shoes. When working with chemicals, solvents and epoxy, wearing an apron can reduce the chance of soaking your clothes with flammable liquids. That’s good for your wallet (you won’t need to buy as many new clothes) and your safety.
The topic of shop safety is never ending discussion, as it should be. Safety procedures should always be learned and adhered to when working on clubs or any other home/shop projects.
I would like to take the time and thank the following GolfWRX members for all their input for this article: Mxtitleistgolfer, Tobybear, Super Tuna, Knudson81, Awalkspoiled, Hispl, Sean2, Dscvrr St Louis, Deck and a special thank you to Tom Wishon for taking the time out his busy schedule to give his input on this topic.
Opinion & Analysis
The 2 primary challenges golf equipment companies face

As the editor-in-chief of this website and an observer of the GolfWRX forums and other online golf equipment discourse for over a decade, I’m pretty well attuned to the grunts and grumbles of a significant portion of the golf equipment purchasing spectrum. And before you accuse me of lording above all in some digital ivory tower, I’d like to offer that I worked at golf courses (public and private) for years prior to picking up my pen, so I’m well-versed in the non-degenerate golf equipment consumers out there. I touched (green)grass (retail)!
Complaints about the ills of and related to the OEMs usually follow some version of: Product cycles are too short for real innovation, tour equipment isn’t the same as retail (which is largely not true, by the way), too much is invested in marketing and not enough in R&D, top staffer X hasn’t even put the new driver in play, so it’s obviously not superior to the previous generation, prices are too high, and on and on.
Without digging into the merits of any of these claims, which I believe are mostly red herrings, I’d like to bring into view of our rangefinder what I believe to be the two primary difficulties golf equipment companies face.
One: As Terry Koehler, back when he was the CEO of Ben Hogan, told me at the time of the Ft Worth irons launch, if you can’t regularly hit the golf ball in a coin-sized area in the middle of the face, there’s not a ton that iron technology can do for you. Now, this is less true now with respect to irons than when he said it, and is less and less true by degrees as the clubs get larger (utilities, fairways, hybrids, drivers), but there remains a great deal of golf equipment truth in that statement. Think about it — which is to say, in TL;DR fashion, get lessons from a qualified instructor who will teach you about the fundamentals of repeatable impact and how the golf swing works, not just offer band-aid fixes. If you can’t repeatably deliver the golf club to the golf ball in something resembling the manner it was designed for, how can you expect to be getting the most out of the club — put another way, the maximum value from your investment?
Similarly, game improvement equipment can only improve your game if you game it. In other words, get fit for the clubs you ought to be playing rather than filling the bag with the ones you wish you could hit or used to be able to hit. Of course, don’t do this if you don’t care about performance and just want to hit a forged blade while playing off an 18 handicap. That’s absolutely fine. There were plenty of members in clubs back in the day playing Hogan Apex or Mizuno MP-32 irons who had no business doing so from a ballstriking standpoint, but they enjoyed their look, feel, and complementary qualities to their Gatsby hats and cashmere sweaters. Do what brings you a measure of joy in this maddening game.
Now, the second issue. This is not a plea for non-conforming equipment; rather, it is a statement of fact. USGA/R&A limits on every facet of golf equipment are detrimental to golf equipment manufacturers. Sure, you know this, but do you think about it as it applies to almost every element of equipment? A 500cc driver would be inherently more forgiving than a 460cc, as one with a COR measurement in excess of 0.83. 50-inch shafts. Box grooves. And on and on.
Would fewer regulations be objectively bad for the game? Would this erode its soul? Fortunately, that’s beside the point of this exercise, which is merely to point out the facts. The fact, in this case, is that equipment restrictions and regulations are the slaughterbench of an abundance of innovation in the golf equipment space. Is this for the best? Well, now I’ve asked the question twice and might as well give a partial response, I guess my answer to that would be, “It depends on what type of golf you’re playing and who you’re playing it with.”
For my part, I don’t mind embarrassing myself with vintage blades and persimmons chasing after the quasi-spiritual elevation of a well-struck shot, but that’s just me. Plenty of folks don’t give a damn if their grooves are conforming. Plenty of folks think the folks in Liberty Corner ought to add a prison to the museum for such offences. And those are just a few of the considerations for the amateur game — which doesn’t get inside the gallery ropes of the pro game…
Different strokes in the game of golf, in my humble opinion.
Anyway, I believe equipment company engineers are genuinely trying to build better equipment year over year. The marketing departments are trying to find ways to make this equipment appeal to the broadest segment of the golf market possible. All of this against (1) the backdrop of — at least for now — firm product cycles. And golfers who, with their ~15 average handicap (men), for the most part, are not striping the golf ball like Tiger in his prime and seem to have less and less time year over year to practice and improve. (2) Regulations that massively restrict what they’re able to do…
That’s the landscape as I see it and the real headwinds for golf equipment companies. No doubt, there’s more I haven’t considered, but I think the previous is a better — and better faith — point of departure when formulating any serious commentary on the golf equipment world than some of the more cynical and conspiratorial takes I hear.
Agree? Disagree? Think I’m worthy of an Adam Hadwin-esque security guard tackle? Let me know in the comments.
@golfoncbs The infamous Adam Hadwin tackle ? #golf #fyp #canada #pgatour #adamhadwin ? Ghibli-style nostalgic waltz – MaSssuguMusic
Podcasts
Fore Love of Golf: Introducing a new club concept

Episode #16 brings us Cliff McKinney. Cliff is the founder of Old Charlie Golf Club, a new club, and concept, to be built in the Florida panhandle. The model is quite interesting and aims to make great, private golf more affordable. We hope you enjoy the show!
Opinion & Analysis
On Scottie Scheffler wondering ‘What’s the point of winning?’

Last week, I came across a reel from BBC Sport on Instagram featuring Scottie Scheffler speaking to the media ahead of The Open at Royal Portrush. In it, he shared that he often wonders what the point is of wanting to win tournaments so badly — especially when he knows, deep down, that it doesn’t lead to a truly fulfilling life.
View this post on Instagram
“Is it great to be able to win tournaments and to accomplish the things I have in the game of golf? Yeah, it brings tears to my eyes just to think about it because I’ve literally worked my entire life to be good at this sport,” Scheffler said. “To have that kind of sense of accomplishment, I think, is a pretty cool feeling. To get to live out your dreams is very special, but at the end of the day, I’m not out here to inspire the next generation of golfers. I’m not out here to inspire someone to be the best player in the world, because what’s the point?”
Ironically — or perhaps perfectly — he went on to win the claret jug.
That question — what’s the point of winning? — cuts straight to the heart of the human journey.
As someone who’s spent over two decades in the trenches of professional golf, and in deep study of the mental, emotional, and spiritual dimensions of the game, I see Scottie’s inner conflict as a sign of soul evolution in motion.
I came to golf late. I wasn’t a junior standout or college All-American. At 27, I left a steady corporate job to see if I could be on the PGA Tour starting as a 14-handicap, average-length hitter. Over the years, my journey has been defined less by trophies and more by the relentless effort to navigate the deeply inequitable and gated system of professional golf — an effort that ultimately turned inward and helped me evolve as both a golfer and a person.
One perspective that helped me make sense of this inner dissonance around competition and our culture’s tendency to overvalue winning is the idea of soul evolution.
The University of Virginia’s Division of Perceptual Studies has done extensive research on reincarnation, and Netflix’s Surviving Death (Episode 6) explores the topic, too. Whether you take it literally or metaphorically, the idea that we’re on a long arc of growth — from beginner to sage elder — offers a profound perspective.
If you accept the premise literally, then terms like “young soul” and “old soul” start to hold meaning. However, even if we set the word “soul” aside, it’s easy to see that different levels of life experience produce different worldviews.
Newer souls — or people in earlier stages of their development — may be curious and kind but still lack discernment or depth. There is a naivety, and they don’t yet question as deeply, tending to see things in black and white, partly because certainty feels safer than confronting the unknown.
As we gain more experience, we begin to experiment. We test limits. We chase extreme external goals — sometimes at the expense of health, relationships, or inner peace — still operating from hunger, ambition, and the fragility of the ego.
It’s a necessary stage, but often a turbulent and unfulfilling one.
David Duval fell off the map after reaching World No. 1. Bubba Watson had his own “Is this it?” moment with his caddie, Ted Scott, after winning the Masters.
In Aaron Rodgers: Enigma, reflecting on his 2011 Super Bowl win, Rodgers said:
“Now I’ve accomplished the only thing that I really, really wanted to do in my life. Now what? I was like, ‘Did I aim at the wrong thing? Did I spend too much time thinking about stuff that ultimately doesn’t give you true happiness?’”
Jim Carrey once said, “I think everybody should get rich and famous and do everything they ever dreamed of so they can see that it’s not the answer.”
Eventually, though, something shifts.
We begin to see in shades of gray. Winning, dominating, accumulating—these pursuits lose their shine. The rewards feel more fleeting. Living in a constant state of fight-or-flight makes us feel alive, yes, but not happy and joyful.
Compassion begins to replace ambition. Love, presence, and gratitude become more fulfilling than status, profits, or trophies. We crave balance over burnout. Collaboration over competition. Meaning over metrics.
Interestingly, if we zoom out, we can apply this same model to nations and cultures. Countries, like people, have a collective “soul stage” made up of the individuals within them.
Take the United States, for example. I’d place it as a mid-level soul: highly competitive and deeply driven, but still learning emotional maturity. Still uncomfortable with nuance. Still believing that more is always better. Despite its global wins, the U.S. currently ranks just 23rd in happiness (as of 2025). You might liken it to a gifted teenager—bold, eager, and ambitious, but angsty and still figuring out how to live well and in balance. As much as a parent wants to protect their child, sometimes the child has to make their own mistakes to truly grow.
So when Scottie Scheffler wonders what the point of winning is, I don’t see someone losing strength.
I see someone evolving.
He’s beginning to look beyond the leaderboard. Beyond metrics of success that carry a lower vibration. And yet, in a poetic twist, Scheffler did go on to win The Open. But that only reinforces the point: even at the pinnacle, the question remains. And if more of us in the golf and sports world — and in U.S. culture at large — started asking similar questions, we might discover that the more meaningful trophy isn’t about accumulating or beating others at all costs.
It’s about awakening and evolving to something more than winning could ever promise.
AndrewD
Oct 7, 2013 at 7:18 am
Work gloves are good for lots of things but don’t use them while grinding! There’s nothing like getting your hand pulled into a bench grinder to ruin your day. If the club is getting too hot while grinding, you just need to take a break and let it cool in the air.
Hugo Lazarde
Oct 4, 2013 at 3:25 pm
Sorry for the misspeeling. It’s beca use of the Android corrector…
Hugo Lazarde
Oct 4, 2013 at 3:20 pm
Safety First… Even for the Most experienced, there is always the chance of ante accidente…
Good article…
Kadin Mahmet
Oct 4, 2013 at 7:33 pm
Thank you for taking the time to read and post! Simple steps can save a trip to the ER.