Equipment

True Temper to release X7, the iron shafts used by Jason Day

Published

11 years ago

Nov 11, 2015

Want to play the same iron shafts used by Jason Day? You’re in luck. True Temper will release its extremely low-launching, low-spinning X7 iron shafts through its network of Performance Fitting Centers and aftermarket dealers starting Jan. 15, 2016.

What makes the X7 different than True Temper’s Dynamic Gold X100 shafts, which are a favorite among PGA Tour players, is their heavier, stiffer construction. They’re approximately 4-5 grams heavier than X100 models, tipping the scales between 134 and 135 grams each. They also have slightly thicker butt sections, which make that part of the shafts stiffer.

While new to the retail market, the X7 was actually created in 2005.

“It was originally made as a compliment to the X100,” said David Walker, senior director of sales and global tour operations for True Temper. “Year in and year out, we had one or two guys try it. It was mostly long-drive guys who wanted something heavier and stiffer. As the years have gone by, more guys try it because they’re getting stronger and have so much more speed.”

The X7 is the lowest-launching, lowest-spinning model in True Temper’s Dynamic Gold iron shaft family.

A great example of today’s stronger, faster PGA Tour players is Day, whose search for a lower ball flight with his irons led him to the X7. With the new iron shafts, he saw a reduction of 400-600 rpm of spin, as well as a launch angle that was approximately 1-degree lower than his previous iron shafts in initial testing.

Day used the X7 to win four of six tournaments in the months of July, August, and September, including the RBC Canadian Open, the PGA Championship and two PGA Tour Playoff events, sparking never-before-seen interest in the shaft.

“Since then, we’ve had quite a few college players and some guys on the Web.com [Tour] ask about it specifically,” Walker said. “Many of the readers of [GolfWRX] have called as well.”

Golfers don’t necessarily need to create as much club head speed as Day — 120 mph on average in 2015 on the PGA Tour — for the shafts to work for them.

“We have a couple of players testing the X7 that wouldn’t strike you as the longest players, but they really don’t want the shaft to flex at all,” Walker said.

If you do find that the X7 is a fit for your game, you’re in good company. Jamie Sadlowski, arguably the longest driver of the golf ball on the planet, uses the X7 shafts in his irons.

Related Topics:shafts True Temper

Up Next

Q&A: Mitsubishi Rayon answers questions about its new Tensei shafts

Don't Miss

XXIO introduces XXIO9 driver, fairway woods

Zak Kozuchowski

25 Comments

Russell NOT Wilson

Nov 20, 2015 at 6:11 pm

10 & 20 years ago these would definitely have been in my testing pool, my metal fairways were tipped Rifle 7.0s that my club builder said it would equal 8.0. Using the Tour Balata and later the Professional, I would still hit my 13* Tour Spoon miles into the air and land from 245 to 275 dependent on what the wind and temperature were that day. I did find the perfect iron shafts in the TTDGX100SL, lower launch, lower spin, both what I wanted to control shot height/peak. The next best was the Rifle Tour Light (can not remember the exact name) developed with input from Colin Montgomery. 10 grams lighter with super stiff tip section. Now after a prolonged battle for my health. my driver swing speed is down to 100 mph, eliminating those sets from use currently. But now back into the gym to regain my core and extremity strengths to see if I can regain my swing speed. My one opportunity to be measured was at the LPGA tourney at Meridian CC, 1996. I chose a 3 wood from the demo barrel, all were over length as was this 3 wood, but 43 inches matched my driver length. The operators were struck speechless when I recorded my swing speed at 116 mph with consistent ball strike and speed consistency. Bonus that week, I got to caddie for Gail Graham for a practice round. Being completely green, I was not the best caddie, but I was inside the ropes and got to observe how the professional caddies worked together to confirm green depths, carry distance over bunkers and raking bunkers the other caddies were allowed to clean the golf ball for a co competitor as it did not qualify as substantial assistance to be ruled as using more than one caddie. The interactions between golfer and caddie, how they wrote notes into their yardage books, info like exactly how far a club traveled on a uphill hole, as well as on a down hill hole. And my first exposure to laser distance measurements, the caddies would make a half dozen measurement per non par 3 hole to get more precise yardage’s then the steel fishing line used by the yardage books publishers. But enough about my example, when I attempted to qualify for the US Publinks, I finished three strokes out of the playoff for the 2 remaining spots tied with 5 golfers. Watching these guys made me feel like a 18 handicapper, booming drives, iron shots that had tremendous impact reports like a pistol. They turned a 470 yard uphill par 4 into a drive and pitch hole, something I could not even imagine in real life. So there are likely 5,000 guys in the US that would be candidates for the 7X, plus the additional 20,000 guys that think that they can use it also. Thank you WRX for keeping us non pro golfers up to date with equipment for playing golf.

Reply Report comment
- Ronny Dunn
  
  May 11, 2016 at 5:09 pm
  
  I would love to get first hand knowledge on how the best manage the course. Did it help your game.
  
  Reply Report comment
Chris

Nov 15, 2015 at 12:02 pm

I have a 115mph swing speed and play a 125 gram shaft. I feel with a softer shaft I can work the ball right to left easier. Just get fit and let the professionals tell you what you need.

Reply Report comment
Steve

Nov 12, 2015 at 9:25 am

I think its a combo of swing speed and how hard you transition from the top. Day swings hard. Seems these would fit .1% . Most hacks that would play these are delusional.

Reply Report comment
- P
  
  Nov 15, 2015 at 3:02 pm
  
  My driver SS is 105, I hit my 7 iron to 165. I can’t wait to get these X7 so I can hit them dead straigtht and dead low with no movement in any direction, perfect for windy days.
  
  Reply Report comment
Joe

Nov 12, 2015 at 12:00 am

Ill be hard-stepping mine…x2

Reply Report comment
- Teaj
  
  Nov 13, 2015 at 8:22 am
  
  wheres the like button… lol
  
  Reply Report comment
Steve

Nov 11, 2015 at 7:15 pm

its nice that TT is bringing these to market but im going to guess very few golfers will actually benefit from these

Reply Report comment
Jason G

Nov 11, 2015 at 2:29 pm

I love the cynicism on this site. Yet another money grab for True Temper. I wish they would work on the quality of the Dynamic Gold line instead of offering heavier versions of the same, low quality stuff.

Reply Report comment
- Tom
  
  Nov 11, 2015 at 3:14 pm
  
  I have been using T T Dynamic golds for over a decade with no problems.
  
  Reply Report comment
  - christian
    
    Nov 12, 2015 at 5:34 pm
    
    I’m thinking he refers to the fact you need to go “Tour Issue” with DG in order to get the tolerances offered by for example Nippon as standard
    
    Reply Report comment
KK

Nov 11, 2015 at 1:52 pm

Monster iron shafts. They certainly work for Jason.

Reply Report comment
Double Mocha Man

Nov 11, 2015 at 12:01 pm

Ah, remember those good ol’ days when shafts were regular, stiff and ladies and nobody thought much of it.

Reply Report comment
Booey

Nov 11, 2015 at 11:11 am

These were available for years until a couple years ago. They’re coming back with the heat transfer logo on them and will be available in January. They aren’t as stiff or heavy as you would think from the X7 designation. They are 132 grams and the overall bend profile is stout but not a board. The big advantage to these is the tips are reinforced so it will bring the flight down and knock spin off compared to the X100s. Anyone who has built with these has seen how much beef is in the tip section because they swingweight pretty heavy. They’ll be available in sets and extra 40.5″ raw lengths so you will be able to soft step them.

Reply Report comment
DatSliceDoe

Nov 11, 2015 at 10:33 am

Do they make these in 2x hardstepped X700? Need moar flex for my 800 yd pitching wedge and 200mph clubhead speed.

In all seriousness, Day’s ball flight is sky high even with these shafts. I would be hard pressed to see how this shaft lowered it based on what we saw this year.

Reply Report comment
Jake Anderson

Nov 11, 2015 at 10:26 am

this is the right shaft for me obviously, because unlike anyone else on golfwrx i can carry the ball 320 in the air.

Reply Report comment
- Christestrogen
  
  Nov 11, 2015 at 1:10 pm
  
  I do that with my 9 iron.
  
  -Christosterone
  
  Reply Report comment
- Joe
  
  Nov 11, 2015 at 1:13 pm
  
  PSSSSHHHHH… 320? That’s my 6 iron. 😛
  
  Reply Report comment
  - timbleking
    
    Nov 11, 2015 at 3:45 pm
    
    I do it with my putter…
    
    Reply Report comment
    - Anthony
      
      Nov 11, 2015 at 4:53 pm
      
      I used to do 320 with the putter but injured my hand. Now its a short 318 yards and I’m disappointed with the loss of yardage lol
      
      Reply Report comment
      - Jake Anderson
        
        Nov 13, 2015 at 5:55 am
        
        i do not believe any of you obviously.
        
        Reply Report comment
        
        KA
        
        Nov 14, 2015 at 2:16 pm
        
        That’s a flip wedge for me. Go get your numbers better brah.
        
        Reply Report comment
  - cgasucks
    
    Nov 14, 2015 at 8:11 pm
    
    That’s nothing….my lob wedge carries that far…on a chipshot…
    
    Reply Report comment
- other paul
  
  Nov 11, 2015 at 8:12 pm
  
  My record is 450. Just saying ????
  
  Reply Report comment
  - other paul
    
    Nov 11, 2015 at 8:14 pm
    
    My smiley wink turned to ???? Weird
    
    Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

1 day ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

1 day ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules