Equipment
2016 Scotty Cameron Select putters
The Scotty Cameron name garners passionate and widespread attention in the putter market, so when Scotty Cameron releases a new putter, golfers take notice.
And Scotty says his new Select putters look, sound and feel better than ever before. That’s due to a new multi-material construction and face inlays, which look like a face insert but wrap down below the leading edge into the sole.
“We’ve extended the methodology of our proven multi-
material technology to include new stainless steel inlays for blades, as well as aluminum inlays for the mid-mallet models,” Cameron says. “The result is a better look, a better sound, a better feel and a better product.”
The line, which consists of seven different putters, utilizes three different constructions.
The Select Newport, Newport 2 and Newport 2.5 putters use a 303 stainless steel face inlay that’s mid-milled, hand-buffed and bonded to a stainless steel body. It also has vibration-dampening material to reduce vibrations for a softer, more responsive feel.
The Select Newport 2 Notchback has a 6061 Aircraft Grade Aluminum face inlay anodized in gunmetal gray. The lightweight face is bonded to a heavier stainless steel body, leading to perimeter weighting that boosts moment of inertia (MOI), a measure of forgiveness.
The Select Newport M1 and M2 mid-mallet style putter also use a 6061 Aircraft Grade Aluminum face inlay, but the material goes down into the sole and pops up through the back cavity to create the sight line.
The body of the putter is made from Stainless Steel, providing perimeter weighting and higher MOI. According to Titleist, the putter is made to stabilize straight-back and straight-through strokes.
Also, each of the putters has two interchangeable stainless steel weights in the heel and toe, a glare resistant finish and comes with a red matador grip.
Read more about each of the new Scotty Cameron Select putters below, which will be available on April 8. All putters will sell at retail for $410, except the dual-balance putter will sell for $425.
Newport
- Heel-and-toe weighted
- Plumbing neck
- 303 stainless steel face inlay
- New sight line
- Shorter, rounded contours
Newport 2
- “Legendary low-slung” heel-and-toe weighted
- Plumbing neck
- Longer, angular contours
- 303 stainless steel face inlay
- Flange sight line
Newport 2.5
- Longer 2.5 profile
- Short flare neck
- 303 stainless steel face inlay
- Flange sight line
Newport 2 Notchback
- Angular blade with mechanical contours
- Notched Flange
- Flowing single bend shaft
- 6061 aircraft grade aluminum face inlay
- Flange sight line
Newport M1 Mallet
- Rounded, flowing mid-mallet
- 6061 aircraft grade aluminum wrap-around face inlay
- Sweeping single-bend shaft
- Pop-thru flange alignment
Newport M2 Mallet
- Rectangular, boxy mid-mallet
- 6061 aircraft grade aluminum wrap-around face inlay
- Flowing, single-bend shaft
- Pop-thru flange alignment
Newport 2 Notchback DB
- 400-gram head (50 grams heavier than the other heads)
- 50-gram weight in the butt end of the 15-inch long grip
- 38-inch standard
Equipment
Putters that never made it: Check out some of the best tour builds that didn’t make the cut
Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.
So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)
Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.
Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.
Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.
Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.
Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.
Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX
3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X
7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X
Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype
Ball: Titleist Pro V1x
Grips: Golf Pride MCC
In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:
“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.
Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”
And our members have been naming their favorites and why in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
- ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”
Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Aaron Rai’s winning WITB: 2026 PGA Championship
Nelly Korda WITB 2026 (April)
Justin Rose on the switch to McLaren Golf, learnings from previous equipment moves
Photos from the 2026 PGA Championship
Patrick Reed WITB 2026 (May)
Driver: Titleist GT3 (9 degrees) Buy here. Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX 3-wood: TaylorMade Qi35 (15 degrees)...
Aaron Rai’s winning WITB: 2026 PGA Championship
Driver: TaylorMade M6 (9 degrees) Shaft: Aldilda Synergy Blue 70 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Blue...
Michael Block WITB 2026 (May)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Black VeloCore+ 5 X 3-wood: TaylorMade Qi4D (15 degrees @14.25) Shaft: Mitsubishi...
Bryson DeChambeau WITB 2026 (May)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X Prototype 3-wood: Krank Formula Fire (10 degrees) Shaft: LA Golf BAD...
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks ago
Aaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment2 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
-
News2 weeks agoWITB Time Machine: Phil Mickelson’s winning WITB, 2021 PGA Championship
-
Equipment2 weeks agoWhich of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
-
Equipment2 weeks agoLead Tape Report: Adjusting the swingweight of the Wanamaker Trophy
Thus
Apr 11, 2016 at 4:46 am
Yip the name on the bumpers are a deal breaker..
If they where blank I’d buy one immediately
Brandon
Mar 15, 2016 at 1:28 pm
I cant wait for them! this will be my first SC. My dad has an oil can he has been putting with for almost 20 years.
Scott
Feb 10, 2016 at 7:15 pm
These can’t come out soon enough. I can’t wait until April!!!!! WOW!!!!
marionmg
Jan 29, 2016 at 8:38 pm
So many tour guys use leading edge toplines or sight dot yet all SC’s retail putters come with flange lines that many putting experts have proven are the hardest to line up. Would be nice to have Speith option as retail.
KK
Jan 28, 2016 at 2:52 am
People Please, can everyone stop flooding these discussion boards complaining about the price of a club, the product cycles of TaylorMade, or how every putter is a copy of the PING anser. We’ve heard this all before a million times. I guess complainers are all up in arms about price because either you can’t afford to buy it, but you want to, or you don’t think its worth the price. If you don’t think its worth it, then don’t buy the club. If you can’t afford it, sorry, but stop posting complaints about price. If you want a cheaper club, go troll eBay, not golfwrx.
Cliff
Jan 28, 2016 at 8:34 am
Please stop complaining about people complaining!
BaBaBoey
Jan 28, 2016 at 9:50 am
Please stop complaining about complaining about people complaining.
Bert
Jan 28, 2016 at 7:37 pm
AM I supposed to care about what you think; you seem to not care what others think?
KK
Jan 30, 2016 at 1:23 am
I care about what people think, just not about the price of a club. Scotty Cameron putters are expensive, in other news, the sky is blue….nothing new here. Bring something tangible to the table Bert. Like why Scotty’s have had the same satin finish for 3+ years running, or why they have gone away from deep milling, or even why they don’t really have any “new” head designs. Those are things that people should care about, not that the price went up $20!
KK2
Jan 30, 2016 at 6:01 pm
Do you really expect people to be insightful and innovative? Uh uh.
joro
Jan 27, 2016 at 5:18 pm
Great, here you go suckers another 400 Dollar PING copy. Enjoy and be the first to part with your money.
NR
Jan 27, 2016 at 10:48 am
So, just an updated Studio Style line w/ adjustable weights? I prefer the cleaner scotty looks… like the original studio select line. And I think by stamping the bumper you are taking away from people who want to send it off to the custom shop. 410 is getting a little too steep as well. They are pretty though.
DJ
Jan 26, 2016 at 11:16 pm
Spent $130 for a odyssey white hot pro #9 when they first came out. Done.
ku
Jan 27, 2016 at 5:05 pm
post in odyssey thread?
DrawDaddy
Feb 9, 2016 at 6:12 am
would you like a cookie?
lsf_21
Jan 26, 2016 at 9:39 pm
These look great. 410 is ridiculous. I placed an order for a Black Lab with custom stampings for 300. These are great if your name is Scott Cameron.
Joe
Jan 26, 2016 at 9:08 pm
Umpteenth repackage of the same thing. They look nice, they will sell.
I wish I could be around in 75+ years to see if the Cameron putters are considered classics.
Dr Troy
Jan 26, 2016 at 8:41 pm
Gorgeous!!
Robert
Jan 26, 2016 at 8:03 pm
I seem to remember many people saying that golf is 50% physical & 75% mental. If you can afford a Scotty and it makes you feel good when you take it out to putt, hopefully the good vibes will turn into more putts made.
Being in Canada where the exchange rate has climbed to stupid levels due to a global glut of oil, we recently saw most Studio Newports go from $399 to $499. Now with this new release, a Scotty will set me back almost what a PXG driver would. Good thing I have my 3 year old GOLO.
KJ
Jan 26, 2016 at 7:55 pm
Finally a Newport with a sight line!!!!!!
KK
Jan 26, 2016 at 6:37 pm
The fit and finish of Scotties demolishes every other putter brand and oh, they win a ton of tournaments. It’s like everything else in life: You want the best or you want just okay?
Brandon
Jan 26, 2016 at 6:21 pm
For me, it is right to compare putter and car as they both gone thru some sort of studies and R&D… We are charged for the works they done and time they spent before launching it.
BTW, TaylorMade M stands for multi materials and Scotty Cameron M stands for Mallet…
Cliff
Jan 27, 2016 at 8:19 am
Can I get a moon roof, power windows, heated seats, climate control on my scotty!
Maybe if it came with a heated grip it may be worth the $410. There is nothing new here!
Eric
Jan 26, 2016 at 4:09 pm
When you buy a Scotty Cameron really all your are buying is the name plated on the putter. You can’t blame Scotty for the price point because people are dumb enough to buy them, but look at what your buying. He took the old Ping Anser design and used some different materials to build it with. Before 1992 nobody had ever heard of this guy. If you want a Scotty Cameron go buy a Ping Anser, an Odyssey, or anything else thats been made the last 25+ years. They’re all the same except for different badges.
Cliff
Jan 26, 2016 at 3:16 pm
I don’t get the SC obsession. The putter has to be the easiest club to make. A grip and shaft run about $25 for the average Joe. Don’t see how there is $300-$375 worth of material and work involved at this point anymore.
Josh
Jan 26, 2016 at 3:41 pm
Then don’t buy it, make your voice heard with your wallet.
And also, if you don’t get the “SC obsession”, stop reading articles about Scotty Cameron putters. Choose to do the things that make you happy!
Cliff
Jan 26, 2016 at 4:05 pm
Thanks!!
Ml
Jan 26, 2016 at 3:53 pm
It’s like a car. It doesn’t cost them 30,000 to make it but they will sell it to your for that.
Cliff
Jan 26, 2016 at 4:07 pm
We are comparing a car to a putter….genius!
Keith
Jan 26, 2016 at 3:08 pm
Well they look pretty nice, I doubt lefties get anything more then one option here though I’m gonna go on a limb and say we get the Newport 2… Just like every other time
MRC
Jan 26, 2016 at 2:33 pm
Interesting that TM and SC used the same code for their “New” designs…. M2.
nick
Jan 26, 2016 at 2:03 pm
yeah not sure about the scotty cameron stamps on the back… the putters as always though, look great imo. now we’re at $410 retail for the standard line? this guy is really maximizing his opportunities. can i blame him? not really… i think the other manufactures need to step their game up a bit. scotty’s putters are in a class of their own and although i think theyre overpriced, he has every right to charge what he wants. no competition. TM can easily re-introduce the itsy bitsy spider… but they released the monstrosity version and it looks like a toy. no demand for that set-up. Day wins huge with this thing and its a discontinued product? why not bring it back? create some buzz and or improve on something that people want.
Don
Jan 26, 2016 at 10:46 am
I wish I could actually afford one of these. But since I am cheap enough that I won’t fork over more than $300 for a driver none of these are in my future. Too expensive.
Chris
Jan 26, 2016 at 12:06 pm
For something you use anywhere from 25-40 times per round, depending on putting skill of course, it makes more sense to spend it on a putter you really like the feel of as opposed to a driver you will hit 14 times a round. I used to quantify the price based on how far the club was going rather than how much use it will get without even realizing it. Once I thought of it in terms of how many times I would use it per round, it became a much easier bullet to bite into.
alexdub
Jan 26, 2016 at 12:33 pm
To continue your line of reasoning… Since I use a golf ball more than twice the amount of times I use a putter per round, should I spend $400 on a golf ball? The cost of a putter is mostly unrelated to the benefit it provides. People buy Scottys (or other high-end putters) because they feel special when they pull them out of the bag. And, if someone’s golf game is influenced by how special they feel when pulling something out of the bag, I’m not sure how much equipment will help anyway.
djdrb
Mar 7, 2016 at 9:45 am
Yes. I use $600 tees made of solid gold to complement my $400 golf balls.
Fahgdat
Jan 26, 2016 at 1:37 pm
It doesn’t matter how many times you hit it if it doesn’t go where you want it. Spend what you have to, in order to get the right gear. Price makes no difference if it doesn’t perform, but humans are stupid in thinking that price makes a difference when it comes to golf equipment
Tom
Jan 26, 2016 at 10:36 am
Interesting. Aircraft aluminum face insert reminds me of the old style Grace designs. That M2 is intriguing to me.
Anthony
Jan 26, 2016 at 10:22 am
I like the Newport’s from the last two years a lot more. The Newport came with no alignment lines and made it much easier to get exactly what you wanted in a putter because you could send it to the custom shop and get exactly what you wanted.
BaBaBoey
Jan 26, 2016 at 10:18 am
I wonder what grade stainless the heads are made out of now and if they’re cast, forged, or milled…
Josh
Jan 26, 2016 at 1:19 pm
LOL a cast Scotty. Now that’s funny. BTW the bodies are (milled) 303 SS. http://www.scottycameron.com/videos-photos/?id=66
BaBaBoey
Jan 27, 2016 at 9:05 pm
Scotty never said the body was milled. He did say it was 303 but all he said was milled face and scotchbrite sole.
CdnColin
Feb 23, 2016 at 6:26 pm
New here and recently retired. In my previous life I was the Stainless/Aluminum Product Mgr. for a major distributer. Basically all aluminum is military grade. This is an additional specification that all mills will certify their product to for no wxtra charge. Have to giggle when I see producers use it for marketing purposes. 6061 is the most common alloy, like vanilla ice cream.
Dj
Jan 26, 2016 at 10:11 am
He just couldn’t leave his name off the bumpers. And $410?!? Gross.