Equipment
Spotted: Cleveland RTX 3 wedges
Cleveland’s first-generation 588 RTX (Rotex), and second-generation RTX 2.0 wedges have been among the most popular wedges for golfers and Tour players since their release. Now, a new member of the family is preparing for its industry debut — the RTX 3 wedge line — and will most certainly be in the bags of PGA Tour players in the coming weeks and months.
On the range of the FedEx St. Jude Classic at TPC Southwind this week, we spotted Cleveland RTX 3 wedges. Based on the photos, there are at least three grinds; V-LG, V-MG and V-FG. As predicted by a member in the forum thread, this may mean “V-Sole Low Grind, V-Sole Mid Grind and V-Sole Full Grind.”
A Cleveland representative says that the new wedges have what’s called “feel-balancing technology,” which is an “under-the-hood” type of technology that “we feel could be revolutionary.”
It’s also confirmed that there will be three different blade finishes and one cavity-back finish. For more information, we’ll have to wait until July 25, which is the embargo for the new RTX 3 wedges.
Join the conversation about the wedges and see more photos here.
Equipment
Putters that never made it: Check out some of the best tour builds that didn’t make the cut
Arguably, the best perk of being a professional golfer on the PGA Tour is the ability to request or even just be handed pretty much any club you could think of. It happens more often than you think, usually with putters around the practice green from one event to the next. Come Wednesday, the Tour bags lining the edge of the putting surface become resting places for fallen flatsticks that never made the cut.
So let’s take a look at some of the best we’ve seen out on Tour this year that never made it to the competition. (You may notice none of Hideki Matsuyama’s custom Scotty Cameron putters made this list. There are too many.)
Let’s start with this custom Damascus Milled Odyssey Rossie made for Ryo Hisatsune. Featuring a single line and the short-slant hossel, we’ve seen plenty of Number 7 and jailbird heads featuring the Damascus Milled insert, but this is the first and only one we’ve spotted in a Rossie. Hisatsune primarily putts with an Odyssey Black Series iX #9, but we have seen him recently with a TaylorMade TP Collection SOTO, so there could be potential that the Damascus Milled Rossie could end up in the bag.
Everyone wants to be Cameron Young right now. We’ve had Justin Thomas and Tom Hoge both game the Scotty Cameron 9.5R prototype. Well, for the PGA Championship, Brooks Koepka nearly joined that list after requesting the same style of putter, with the full-length alignment line. But the Scotty Cameron reps took the request a step further and made one specially for Koepka with a Teryllium insert, similar to one in his previous Newport 2 gamers. The reason why this one didn’t go into play, though? Because it was too heavy.
Harry Hall was the third-best putter on Tour last year, so when Bettinardi made him a custom proto, you know it was going to be good. The custom BB28 blade features VDF face milling, a custom-welded single-bend shaft, and the owner’s initials – HH – on the sole of the putter. Hall, who usually games an Odyssey O-Works #7 W, has dabbled with a TaylorMade Spider Tour X already this year. Maybe there’s a chance this Bettinardi might make his bag.
Honestly, this one doesn’t need a description. It’s Kieth Mitchell’s custom Scotty Cameron Napa. One Scotty Cameron face stamp, two Scotty Dogs, two Scotty Cameron 7-Point Crowns and one Circle T. That is all. Oh, except for the Cashmere Cameron headcover.
Finally, and just for fun, how about we pour one out for this TaylorMade Spider Tour X made for Scottie Scheffler in its new torched finish. It’s unlikely we’ll see a putter change anytime soon from the best golfer in the world. In fact, he hit just two putts with it on the Harbour Town practice before going back to his trusty gamer.
Driver: Titleist GT3 (9 degrees) Buy here.
Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX
3-wood: TaylorMade Qi35 (15 degrees)
Shaft: Fujikura Ventus Blue 7 X
7-wood: TaylorMade Qi35 (21 degrees)
Shaft: Fujikura Ventus Blue 8 X
Irons: Grindworks PR-202 (4), Grindworks PR-101A (5-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100
Wedges: Cleveland RTX6 Tour Rack (52-10 Mid), Titleist Vokey Design SM10 (56-08M), SM11 (60-04T)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Scotty Cameron Tour Rat 1.5 Tour Prototype
Ball: Titleist Pro V1x
Grips: Golf Pride MCC
In our forums, our members have been discussing their favorite major winning irons used by Tiger Woods. WRXer ‘golferdude54’ kicks off the thread saying:
“Mizuno MP 14/29. Titleist 681T. Nike Forged Blades. TaylorMade P7TW.
Among these irons that helped Tiger win 15 majors, which is your favorite in terms of looks?”
And our members have been naming their favorites and why in response.
Here are a couple of posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- SwingBlade: “I prefer the early blades he played and the more recent TM TW’s especially because after Tiger had his major behavioral setbacks, part of Nikes support payback was making Tiger play a Nike putter and cease using his beloved uniquely customized Scotty putter.”
- ProjectX: “This (Nike Forged Blades) and there’s not even a close second.”
Entire Thread: “Which of Tiger’s major winning irons are your favorite? – GolfWRXers discuss”
Justin Rose WITB 2026 (April): Full WITB breakdown with new McLaren irons
RBC Heritage Tour Report: More minis, course-specific setups, Spider & GTS launches
What’s the story behind Webb Simpson’s custom-stamped irons?
Cadillac Championship Tour Report: Spieth’s sizable changes, McLaren Golf launches, and more
Kristoffer Reitan’s winning WITB: 2026 Truist Championship
Cameron Young’s winning WITB: 2026 Cadillac Championship
Aaron Rai’s winning WITB: 2026 PGA Championship
Nelly Korda WITB 2026 (April)
Justin Rose on the switch to McLaren Golf, learnings from previous equipment moves
Photos from the 2026 PGA Championship
Patrick Reed WITB 2026 (May)
Driver: Titleist GT3 (9 degrees) Buy here. Shaft: Aldila Rogue Silver 130 M.S.I. 70 TX 3-wood: TaylorMade Qi35 (15 degrees)...
Aaron Rai’s winning WITB: 2026 PGA Championship
Driver: TaylorMade M6 (9 degrees) Shaft: Aldilda Synergy Blue 70 TX 3-wood: TaylorMade Qi10 (15 degrees) Shaft: Fujikura Ventus Blue...
Michael Block WITB 2026 (May)
Driver: TaylorMade Qi4D (9 degrees) Shaft: Fujikura Ventus Black VeloCore+ 5 X 3-wood: TaylorMade Qi4D (15 degrees @14.25) Shaft: Mitsubishi...
Bryson DeChambeau WITB 2026 (May)
Driver: Krank Formula Fire Pro (6 degrees) Shaft: Project X Prototype 3-wood: Krank Formula Fire (10 degrees) Shaft: LA Golf BAD...
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks ago
Aaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment2 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink
-
News2 weeks agoWITB Time Machine: Phil Mickelson’s winning WITB, 2021 PGA Championship
-
Equipment2 weeks agoWhich of Tiger’s major winning irons are your favorite? – GolfWRXers discuss
-
Equipment2 weeks agoLead Tape Report: Adjusting the swingweight of the Wanamaker Trophy
Jack always
Jun 15, 2016 at 7:51 am
Very similar to last model very good not great
Steve S
Jun 10, 2016 at 10:04 am
Not sure why I would spend a lot for these. Don’t appear to be that much different than the previous version. Love to see actual test data that compares various wedges. Otherwise it’s all marketing hype to me. I could care less about color and finish, until someone proves to me that it affects performance. I’d use a shovel(if it were legal) if it got me close to the pin with stopping power.
DB
Sep 21, 2016 at 5:02 pm
Steve S and jack always, you don’t have to buy them if you’re happy with your current wedges, but why poo-poo on them without ever even trying it? If you bothered to read the data on these, they are in fact different from the last version, especially the sole grinds. But like I said, if you’re happy with you current setup then good for you. For those of us out here looking to upgrade or replace an old set, isn’t it OK to have new stuff to choose from? Or I guess we should all just use whatever is left on the shelves and have all the equipment mfgrs go out of business? Surely there are enough clubs in stock to keep us all playing for the next 250 years. Do you have this same opinion of car companies? You do realize they come out with a new model EVERY year, most often the same car as last year with minor “improvements” or “tweaks”? If you are not in the market for a new car, who cares? If you are, its nice to be able to get something new rather than whatever car Steve or jack are driving. I tell you what, when you are ready to get new wedges let us all know so we’ll know its OK for us to look as well.
Jim
Jun 8, 2016 at 6:53 am
They better have a 4* bounce option this time and have a blacked out color finish that doesn’t fade as fast. Then I would be sold. Already game RTX 2.0s but plan to switch to SM5 or 6 because they have a lower bounce wedge in the 58* and 60* setup.
Tim
Jun 8, 2016 at 11:33 pm
You mean something more then cheap paint that wears off within weeks?
Brown
Jun 8, 2016 at 3:26 am
WHat’s the obsession with brown colored clubs recently, everybody’s doing it, it’s weird
Cwolf
Jun 7, 2016 at 8:07 pm
I hope there is a raw finish
TheStylist
Jun 7, 2016 at 7:42 pm
Glad to see Cleveland still at it. Always been my favorite company for irons and wedges.
Tom Duckworth
Jun 7, 2016 at 5:19 pm
Love the clean look and color. Looking forward to a review.
Bert
Jun 7, 2016 at 5:14 pm
Going in my bag immediately – awesome.
Tom
Jun 7, 2016 at 3:20 pm
Hey screw in weights?
jnak97
Jun 7, 2016 at 5:42 pm
Looks like just a movement of their current dot system for grind identification.
Peter
Jun 8, 2016 at 12:20 am
its their bounce dots. 1 dot lowest bounce. 2 dots mid bounce. 3 dots highest bounce.
Jim
Jun 8, 2016 at 6:52 am
Looking closely those aren’t screws. They look like punch marks.
Matt
Jun 7, 2016 at 2:28 pm
Dig the color.
Alex
Jun 7, 2016 at 1:11 pm
Simply beautiful
Cu
Jun 7, 2016 at 1:11 pm
This game’s getting too easy. All courses should have to have 5 inch rough on all sides as standard. And in climates that doesn’t allow for grass to grow easily, they should have to have hard-as-concrete fairways and the rough totally unkept and uncut all year.
lol
Johny Thunder
Jun 7, 2016 at 11:13 pm
I agree with Jack Nicklaus – it’s far too easy now and the ball goes too far.
I would suggest making the ball square. That should protect Jack’s records and precioussss par at his courses.
Mark Moser
Jun 15, 2016 at 11:06 pm
Protect Jacks record from who?? Never has been any threat to it.
DB
Sep 21, 2016 at 5:04 pm
What does this have to do with new wedges?