Equipment

TaylorMade 2017 M1 and M2 irons: What you need to know

Published

9 years ago

Dec 9, 2016

Did you miss Face Slots? They’re back.

With TaylorMade’s RSi irons, released in 2015, the company introduced a never-before-seen, ultra-visible technology on its club faces. Two polymer-filled slots — one on the heel, one on the toe — were added to help raise ball speeds on off-center hits.

Face Slots have been added to TaylorMade’s new M1 and M2 irons.

With the company’s 2016 game-improve release, the M2 and M2 Tour irons, Face Slots went away. But for TaylorMade’s 2017 release of the irons bearing the same name, the forgiveness-based, Face-Slot technology is back.

According to TaylorMade, Face Slots are most effective on shots hit high and on the toe of the club face, an area where the majority of golfers contact their irons shots. The Face Slots couple with several new design features to further increase distance and forgiveness compared to the 2016 M2 irons.

TaylorMade’s M2 (left) and M1 irons use Speed Pockets, slots in the sole that make the club faces more flexible.

Also new for 2017 are TaylorMade’s M1 irons, the first edition of irons with that name. They replace the M2 Tour irons in the company line, a compact distance iron that we’ve spotted in the bags of PGA Tour players, who use them as long-iron and hybrid replacements.

The M1 name in TaylorMade’s M-Series is synonymous with more compact heads, clubs that serious golfers tend to prefer. Keeping with that theme, the M1 irons have smaller bodies, thinner soles and thinner top lines, but are made with many of the same technologies as the 2017 M2 irons.

Learn more about each of the new iron designs below.

2017 M2 irons

94bde8cce75ab820d4af6dec9d7e2d78

TaylorMade’s new M2 irons are made with 33 percent thinner top lines, meaning they will look sleeker at address than their predecessors. They also have a 7 percent shallower blade height, helping to lower center of gravity (CG) for a higher launch.

Speed Pockets in the 4, 5, 6 and 7 irons, which were used in previous iterations to increase ball speeds on off-center hits, were made 20 percent deeper to improve the flexibility of the club faces. They help improve ball speed on center strikes, but more importantly they promote more ball speed on off-center hits than their predecessors.

35c57500aec7edbbdbc48a4b712f474d

As seen in the 2016 M2 irons, the 2017 M2 irons also have fluted hosels to save weight, except the six-sided flutes are now wider and thinner, saving an additional 2 grams that was used to lower the CG of the iron heads. With what may be music to club fitters’ ears, TaylorMade added a slot at the hosel bend, allowing the clubs to be bent easier for less restriction on loft and lie angle adjustments.

As with the M1 and M2 drivers, the M2 irons have a “Geocoustic” design to improve sound and feel. For the irons, that means there’s a vibration-dampening badge behind the face, and a rib structure tucked below the topline that creates better sound and feel.

0c859382fd72cbff629d824f5da8e1dd

The M2 irons are also available with a sand wedge (54 degrees) that’s designed specifically for bunker play, rather than full shots from grass. It uses more bounce to help golfers more easily move the club through sand. A 59-degree lob wedge has a low-bounce design to perform better from tight lies.

The M2 irons (4-LW) will sell for $799 with steel REAX HL 88 shafts by FST (S and R flexes) and $899 with M2 REAX graphite shafts (S, R, A, L flexes). They will be available Jan. 27, 2017.

M1 Irons

05262b49c6d096c5df61f343c61b32f7

Although TaylorMade’s M1 irons are made to be more compact and sleeker than the M2 irons, they use tungsten in the toes of the long irons (3-7) to ensure forgiveness is not sacrificed. The addition of tungsten in the M1 irons allowed TaylorMade to nearly center CG in the irons — about 1 millimeter from center, according to TaylorMade — from heel-to-toe, and drop CG lower in the head for a higher launch and a greater MOI (moment of inertia, a measure of forgiveness).

b15a0f3f699806fe2729a4ca8194641d

The M1 irons also have a fluted hosel to save weight, but it’s used only on the under portion of the hosel, effectively blocking the weight-saving design from a golfer’s view at address.

Compared to the 2017 M2 irons, the M1 irons have many of the same technologies, including a “Geocoustic” design for better sound and feel. They also have Face Slots and Speed Pockets in their soles (also used in the 3-7 irons) to improve forgiveness on off-center strikes.

TaylorMade’s M2 (left) and M1 irons at address.

The leading edges and sole widths are thinner on the M1 irons when compared to the M2 irons, helping improve turf interaction for better players who are likely to have slightly shallower angles of attack.

The M1 irons (3-PW) will be available on March 1, 2017, and will come stock with True Temper’s XP95 steel shafts ($999) or Mitsubishi Rayon’s Kuro Kage Silver graphite shafts ($1,199). Additional shafts options are also available for no upcharge.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

1 day ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

1 day ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules