Equipment

Nippon expands Modus line with Tour 105 and 125 iron shafts

Published

11 years ago

Aug 1, 2015

Nippon iron shafts have gained the attention of many PGA Tour players in recent years. Proof can be found in our Tour/Pre-Release forum, where a thread published in November 2014 — “Is it just me or are a lot of pros switching to Nippon iron shafts” — has amassed nearly 2,000 replies and 165,000 views.

Most of the conversation in the thread has revolved around Nippon’s N.S. Pro Modus3 Tour 120 and Tour 130 shafts. Expect the conversation to continue now that the company has released two new Modus shaft models: the Tour 105 and Tour 125.

Both the Tour 105 and Tour 125 are mid-launching, mid-spinning shafts, but as their names imply they use different weights to target two distinct audiences.

N.S. Pro Modus3 Tour 105

The Tour 105 is the company’s lightest N.S. Pro Modus3 iron shaft, and was known as the “Proto ST” during its 48-month testing phase on the PGA Tour that saw as many as 25 players using the shaft at one point. It weighs approximately 106 grams in stiff flex, and 112 grams in x-stiff flex, making it a fit for golfers who prefer the lightweight steel and composite/graphite shaft models that have increased in popularity in recent years.

[quote_box_center]”The Tour 105 really caught us by surprise,” said Hiro Fukuda, sales and marketing for Nippon Shaft in the Americas. “We didn’t expect this shaft to do so well on Tour. We brought it out based on the recommendation of our tour reps, and the feedback was that its spin rate and trajectory was more consistent than other shafts in the 115-gram category.”[/quote_box_center]

OEMs have taken notice. Ping chose the N.S. Pro Modus3 Tour 105 as a stock shaft option for its new “i” and GMax irons.

N.S. Pro Modus3 Tour 125

The Tour 125 shaft weighs roughly 125 grams, and first gained traction on the Japan Golf Tour. It will launch higher than the company’s Tour 120 shaft, yet lower than the company’s Tour 130 shaft. According to Fukuda, the Tour 125 has been most popular with former Dynamic Gold players.

The Tour 125 uses Nippon’s MHT or “Multi-Heat Treatment” Technology, which allows the company to use different heat treatments on different areas of the shaft to fine tune feel and performance. The technology was also used on the company’s N.S. Pro Modus3 wedge shafts, which were released in April. In the Tour 125’s case, the heat treatment gave the shaft a slightly softer tip section and a slightly stiffer butt section.

Both shafts are currently available through Nippon’s network of retailers and fitters for $37 each.

Related Topics:nippon shafts

Up Next

Callaway Great Big Bertha Driver: What you need to know

Don't Miss

From the Forums: What’s buzzing on WRX this week

Zak Kozuchowski

12 Comments

Joe

Aug 13, 2015 at 11:09 am

In stiff PING says the Nippon Modus 105 actually weighs 100g, cut. The CFS weighs 110g, cut.

Reply Report comment
Mat

Aug 3, 2015 at 10:35 am

I could imagine the 105’s in some S55s would be rather enjoyable…

Reply Report comment
Dave

Aug 2, 2015 at 8:40 am

Just got fitted for Ping new I release. It came down to the Modus 105 or the True Temper Project X 95. It was so close. I was within 0.5% on ball speed, swing speed, smash factor, launch angle and average carry was identical. TT had a bit higher average spin for me 5357 vs. 5296 and total carry with a 7i was 172 with TT versus 167. I went with the TT based purely off of comfort and feel since they were so close. But these were very consistent shafts and if I have any second thoughts, I will move to these.

Reply Report comment
Mark

Aug 2, 2015 at 5:34 am

Our assistant has these in his AP2s. Very smooth to the point of feeling “soggy”. No discernable
difference in performance considering the upcharge.

Reply Report comment
Mats B

Aug 1, 2015 at 3:47 pm

Nippon rules! Smoothest iron shaft in the current market, with tight dispersion and great trajectory and spin. I play Modus3 120 Stiff in my forged Mizuno 850s and in my 50 deg. Titleist SM5 Gap Wedge. Thinking of changing my 54 and 58 deg SM5 Wedges to Nippon Wedge shaft as well. It may well happen, before the grooves are worn out. 🙂

Reply Report comment
Joe

Aug 1, 2015 at 3:34 pm

Ping calls the 105 a high launch shaft in their media. Yet in this article it’s called mid. Which is true? How does it compare to the CFS which PING calls “mid”. Thank you.

Reply Report comment
- Mats B
  
  Aug 1, 2015 at 3:51 pm
  
  CFS:s can’t compete, if you ask me, I’ve tried them both in I25:s and S55:s. Doesn’t provide the same smooth feel and dispersion is not keeping up. At least not with my swing speed and the way I load the shaft…..F.Y.I I’m a swinger not a hitter.
  
  Reply Report comment
- KK
  
  Aug 1, 2015 at 7:52 pm
  
  I’m guessing it’s mid in X, high in R and maybe S. I think steel shafts have fairly similar specs per weight class and is differentiated more on feel and individual swing/iron head. That’s compared with graphite which can vary wildly in the same weight class because of the increased engineering potential of composites. You may draw your own conclusions based on the raw weight of CFS but of course, in-person demo is the way to go.
  
  Reply Report comment
  - Joe
    
    Aug 2, 2015 at 12:36 am
    
    They just seem so similar spec-wise. Within a few grams. CFS vs MODUS 105. Hmmm
    
    Reply Report comment
    - Mats B
      
      Aug 2, 2015 at 1:38 am
      
      Ask your fitter to put one of each in a 6 or 7 iron and try it out, using Trackmann or Flightscope on an outdoor driving range. Compare your feel with the given data. Make sure both clubs has the exact same swing weight to start with. Otherwise you’re not comparing the shafts. If you like your current 6 or 7 iron, use the same swing weight, with the CFS and Modus 105 shaft. I agree with KK graphite has a wider range of engineering dispersion. But for steel shafts engineering possibilities has changed dramatically over the past 5 – 10 years. And steel shafts currently has an advantage over graphite in one area, it might change in the future, but that is the shaping of the profile of the shaft, which in my opinion hugely influence, what we feel as players. All options brings out both pros and cons for us amateurs, unless we decide to stick to TT Dynamic Gold. If you ask me a regular set of Nippon iron shafts are delivered with roughly the same tight tolerances as TT tour issue shafts. To me that’s a quality mark. Good Luck, for more info, check out: http://www.golfwrx.com/231525/iron-shaft-shootout-top-rated-steel-and-graphite-iron-shafts-get-put-to-the-test/
      
      Reply Report comment
      - Joe
        
        Aug 2, 2015 at 7:09 pm
        
        I’ve played x100 for years. It was more just a curiosity question. Tnx
        
        Reply Report comment
        
        Mats "PUMP 2" Bergsten
        
        Aug 4, 2015 at 4:13 am
        
        Fair enough Joe. Coming from X100:s you’d be looking more towards Modus, 120, New 125 or 130, if you’re looking for something to compete with your X100:s. 🙂
        
        Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Tour Edge unveils all-new Exotics mini driver

Published

1 day ago

May 12, 2026

Gianni Magliocco

Tour Edge Golf has today introduced the all-new Exotics mini driver, engineered to deliver a powerful combination of speed, control, and versatility in the long game.

The Exotics Mini combines a titanium face with a stainless-steel body in design to balance ball speed with stability and control, creating a versatile option at the top end of the bag.

At the core of the design is Tour Edge’s proprietary Combo Brazing technology, a high-precision thermal bonding process that seamlessly fuses a titanium cup face to a stainless-steel body into a single, continuous structure. By eliminating energy loss found in traditional multi-piece constructions, Combo Brazing is designed to deliver faster face response, more efficient energy transfer, and a uniquely powerful yet controlled feel.

The multi-material construction also allows mass to be positioned lower and deeper in the head in a bid to increase stability, while the thin titanium face is engineered to maintain ball speed across a wider impact area.

“While the initial goal was to enhance control and versatility in the long game, Combo Brazing ultimately drove measurable gains in ball speed and distance within the mini driver category. In robot testing, we’ve documented higher ball speeds, higher launch, reduced spin, and increased carry and total distance compared to leading models.” – Vice President of R&D Matt Neeley

In addition to distance performance, the Exotics mini emphasizes forgiveness through a heavier stainless-steel body that shifts mass toward the perimeter. This configuration increases MOI relative to traditional all-titanium mini drivers, helping preserve ball speed and directional stability on off-center strikes. Paired with Pyramid Face Technology from the Exotics metalwood line, the design is intended to support consistent speed across the face.

To further enhance MOI, a lightweight carbon fiber crown frees additional mass that is strategically repositioned low and deep in the head in design to improve stability and promote optimal launch with controlled spin.

“We designed the Mini to be about five millimeters shallower than other mini drivers on the market. That change improves playability off the deck. From a clean fairway lie, it can function as a strong 3-wood alternative while still providing control off the tee.” – Tour Edge CEO David Glod

An adjustable hosel system allows for loft and lie tuning to dial in trajectory and shot shape, while a fixed 13-gram rear weight helps stabilize the head through impact to improve dispersion consistency. The Exotics Mini Driver is available in 11.5 and 13.5-degree lofts in right-handed models.

Pricing & Availability

The Exotics Mini Driver is available for pre-order beginning today for $399.99 USD at touredge.com, and will be available for purchase at retail outlets worldwide on May 22, 2026.

Equipment

Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss

Published

1 day ago

May 12, 2026

Gianni Magliocco

In our forums, our members have been pitting a Srixon ZXi combo against a TaylorMade P7CB/770 combo. WRXer ‘edutch22’ is on the hunt for a new set of irons and kicks off the thread saying:

“Looking at picking up a new set of irons and think I’ve narrowed it down to Srixon ZXi combo or Taylormade P7CB/770 combo. I am currently a 5 cap and allbeit I feel irons are my weakness. My miss is a little to the toe side. I am decently steep at 4-5 down. Always thought I am high spin but recently on trackman my 7 was spinning at 5800 roughly.

My question or looking for thoughts on which one would benefit me more from a forgiveness standpoint? Or is there another iron is should be looking at entirely? I only get to play about once or twice a week, if I am not playing a 2-3 day event. Thanks in advance.”

And our members have been sharing their thoughts and suggestions in response.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

manima1: “You just can’t go wrong with Srixon ZXi7.”
MattM97: “You have to hit them to know, the V-Sole on the Srixon can be make or break for many.”
dmeeksDC: “P7CB is more forgiving for me than ZXi7 because my main miss is low middle and the P7CB still flies and spins great on that miss. These are both really nice irons but I like the P7CB more than the Zxi7 and the P770 (or P790) more than the Zxi5. The Srixons are larger so if that gives you confidence that is the way to go. I don’t feel like I get any benefit from the V-sole and the P7CBs live up to their high Maltby forgiveness rating so the TaylorMades have been great for me.”

Entire Thread: “Srixon ZXi combo or TaylorMade P7CB/770 combo? – GolfWRXers discuss”

Equipment

From the GolfWRX Classifieds: 2024 Wilson Staff CB/Blade combo

Published

1 day ago

May 12, 2026

Gianni Magliocco

At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, @pianoman0123 has a 2024 Wilson Staff CB/Blade combo up for grabs.

From the listing: “2024 Wilson Staff CB/Blade Combo. 4-8 irons are CB’s and the 9,PW are Blades. 5-PW have Project X 6.0 Shafts and the 4 Iron has a Steelfiber CW110 Stiff Shaft. Standard Length, Lie and Lofts. These are in very good condition the shafts just don’t work for me. Like new Lamkin Grips on the 5-PW and a stock Golf Pride on the 4 Iron. $525 OBO.”

To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules